What type of fire Extinguisher replaces a foam Extinguisher
A person submitted this question to Rosie's free generator. The asker's identity is neither imported nor published.
Rosie's answer
Published by SALUSTo replace a foam extinguisher, consider these options based on the class of fire hazard you need to address [1]:
- Class A Hazards: For ordinary combustibles like wood and paper, you can use water, loaded stream, or multipurpose dry chemical extinguishers 1, 4.
- Class B Hazards: For flammable liquids and gases, suitable alternatives include Halon 1301, Halon 1211, carbon dioxide, dry chemicals, or loaded stream extinguishers 1, 4.
- Class C Hazards: When dealing with energized electrical equipment, Halon 1301, Halon 1211, carbon dioxide, or dry chemical extinguishers are appropriate because they are non-conductive 1, 4.
It's important to select an extinguisher that matches the specific fire hazards present in your workplace [1].
Sources used for this answer
[1] Safety Standards for General Safety and Health Standards (Chaper 296-24 WAC)
Page 264
Open source documentSource excerpt
\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ protection. The selection and distribution of fire extinguishers must reflect the type and class of fire hazards associated with a particular workplace. Extinguishers for protecting Class A hazards may be selected from the following types: Water, foam, loaded stream, or multipurpose dry chemical. Extinguishers for protecting Class B hazards may be selected from the following types: Halon 1301, Halon 1211, carbon dioxide, dry chemicals, foam, or loaded stream. Extinguishers for Class C hazards may be selected from the following types: Halon 1301, Halon 1211, carbon dioxide, or dry chemical. Combustible metal (Class D hazards) fires pose a different type of fire problem in the workplace. Extinguishers using water, gas, or certain dry chemicals cannot extinguish or control this type of fire. Therefore, certain metals have specific dry powder extinguishing agents which can extinguish or control this type of fire. Those agents which have been specifically approved for use on certain metal fires provide the best protection; however, there are also some 'universal' type agents which can be used effectively on a variety of combustible metal fires if necessary. The 'universal' type agents include: Foundry flux, Lith-X powder, TMB liquid, pyromet powder, TEC powder, dry talc, dry graphite powder, dry sand, dry sodium chloride, dry soda ash, lithium chloride, zirconium silicate, and dry dolomite. Water is not generally accepted as an effective extinguishing agent for metal fires. When applied to hot burning metal, water will break down into its basic atoms of oxygen and hydrogen. This chemical breakdown contributes to the combustion of the metal. However, water is also a good universal coolant and can be used on some combustible metals, but only under p…
Keep exploring.
Write a risk assessment for enoc fuel station c store front side led screen installation, remove of existing billboard , structure…
A suitable RAMS for installing a front-side LED screen at an operating ENOC fuel station C-store should classify the work as high-risk construction in a live fuel-retail environment and require a task-by-task hazard assessment before work starts. The assessment should apply the hierarchy of controls, prioritizing
Read the threadgive me topics
Toolbox Talk: Fire Prevention and Explosion Prevention *Date:** [DATE] *Duration:** [DURATION] minutes *Presenter:** [PRESENTER NAME] *Location:** [LOCATION] Objective To educate workers on fire and explosion hazards, prevention methods, and emergency procedures to ensure a safe working environment. Introduction Fires
Read the threadCreate a pre-task plan for spraying fireproofing
\[PRE TASK PLAN TITLE] ====================== *Project:** \[PROJECT NAME] *Date:** 2025-07-21 *Location:** \[LOCATION] *Supervisor:** \[SUPERVISOR NAME] Task Overview This pre-task plan outlines the safety procedures for fireproofing spray application, including hazard assessment, PPE requirements, ventilation, and
Read the threadWrite a toolbox talk on lithium battery augmentation construction
Toolbox Talk: Lithium Battery Augmentation Construction *Date:** [DATE] *Duration:** [DURATION] minutes *Presenter:** [PRESENTER NAME] *Location:** [LOCATION] Objective To educate participants on the safe handling, installation, and maintenance of lithium batteries during construction projects, emphasizing the
Read the threadTalking about safety hazards on the job site related yo foe sprinkler installation
Fire Sprinkler Installation Safety ================================== *Date:** 2025-09-05 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To understand the hazards associated with fire sprinkler installation on construction sites and implement effective prevention
Read the threadWrite a toolbox talk on fire exstinguishers
Portable Fire Extinguisher Safety ================================= *Date:** 2026-02-18 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure all employees understand the safe use, inspection, and maintenance of portable fire extinguishers. Introduction Portable
Read the threadAdd your experience.
Community answers can add practical context. They are moderated, but they are not SALUS-reviewed safety guidance.
New contributions are temporarily closed while the moderation queue is configured.
Community answers(0)
No community answers have been approved yet.
Comments on Rosie's answer(0)
No comments have been approved yet.