Skip to content
All safety questions
Asked by a personGeneral — US and Canadaen-CA

Annual First Aid Drills worksafe BC

A person submitted this question to Rosie's free generator. The asker's identity is neither imported nor published.

Rosie's answer

Published by SALUS

The employer must conduct first aid drills at least once each year, and whenever the procedures change, to ensure the procedures are effective and that workers, first aid attendants, and other authorized personnel are capable of fulfilling their roles and responsibilities. [1]

1 source record(s)

Sources used for this answer

[1] Occupational Health and Safety Regulation (B.C. Reg. 296/97)

Page 22

Open source document

Source excerpt

# OCCUPATIONAL HEALTH AND SAFETY REGULATION (cont.) ## First aid procedures (cont.) B.C. Reg. 296/97 WORKERS COMPENSATION ACT # OCCUPATIONAL HEALTH AND SAFETY REGULATION Part 3 - Rights and Responsibilities (3) The first aid attendant and all other persons authorized to call for transportation for injured workers must be trained in the procedures. (4) At least once each year and whenever the procedures change, the employer must ensure that drills are conducted to ensure that (a) the procedures are effective, and (b) workers, first aid attendants and other persons referred to in subsection (3) are capable of fulfilling their roles and responsibilities. [en. B.C. Reg. 348/2003, S. 2; am. B.C. Reg. 132/2023, S. 5.] ## Air transportation 3.17.1 If air transportation is the primary or only method for transporting an injured worker, all of the following requirements must be met: (a) before the start of operations in a workplace, arrangements must be made with an air service to ensure that (i) an appropriate aircraft is reasonably available to the workplace during those operations, and (ii) without limiting subparagraph (i), there is at least (A) one stretcher in the aircraft, or (B) one stretcher, at the workplace, that is compatible with the aircraft; (b) the arrangements in paragraph (a) must include procedures for (i) the employer to determine the availability of appropriate aircraft before the start of each work day, and (ii) the air service to notify the employer if an appropriate aircraft ceases to be available; (c) a system must be provided that enables the pilot of the aircraft and the first aid attendant attending to an injured worker to communicate at all times when the aircraft is in transit to the location of the injured worker and during transport of the injured worker to medical treatment. [en. B.C. Reg. 320/2007, App. A, S. 4; am. B.C. Reg. 132/2023, S. 6.] - Communication and availability -

Related Q&A

Keep exploring.

Human questionGeneral

Write a toolbox talk on Hand tools

Safe Use of Hand Tools ====================== *Date:** 2026-01-13 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure all personnel understand the correct and safe methods for using hand tools, minimizing the risk of injuries. Introduction Hand tools are

Read the thread
Human questionGeneral

Pooping at work

Toolbox Talk: Maintaining Hygiene at Work *Date:** [DATE] *Duration:** [DURATION] minutes *Presenter:** [PRESENTER NAME] *Location:** [LOCATION] Objective The objective of this toolbox talk is to emphasize the importance of maintaining good personal hygiene at the workplace to prevent the spread of germs and illnesses

Read the thread
Human questionGeneral

Substation safety

Toolbox Talk: Substation Safety *Date:** [DATE] *Duration:** [DURATION] minutes *Presenter:** [PRESENTER NAME] *Location:** [LOCATION] Objective To provide employees with the knowledge and procedures necessary to work safely in and around substations, minimizing the risk of electrical hazards and other injuries.

Read the thread
Human questionGeneral

write a toolbox talk for machine guarding

Machine Guarding Safety ======================= *Date:** 2025-11-20 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To understand the importance of machine guarding, identify hazards, and implement control measures to prevent injuries. Introduction Machine guarding is

Read the thread
Human questionGeneral

Toolbox talk on wearing worn out safety boots

Hazards of Worn or Damaged Safety Boots ======================================= *Date:** 2025-09-08 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To understand the risks associated with wearing worn or damaged safety boots and to reinforce the importance of regular

Read the thread
Human questionGeneral

Trenches

When working with trenches, there are several key safety requirements to ensure the safety of employees: Observation and Supervision: Ensure that there is an employee on the surface who can observe the employee working in the trench. This is crucial for immediate assistance in case of an emergency [1]. Material

Read the thread
Discussion thread

Add your experience.

Community answers can add practical context. They are moderated, but they are not SALUS-reviewed safety guidance.

New contributions are temporarily closed while the moderation queue is configured.

Community answers(0)

No community answers have been approved yet.

Comments on Rosie's answer(0)

No comments have been approved yet.

Ready to put operational safety to work?

Join 400K users across 150K sites already on SALUS.

No commitment · 30-minute personalized walkthrough