Skip to content
All safety questions
Asked by a personCanadaen-CA

Build me an emergency response exercise for a thermal facility in northern alberta

A person submitted this question to Rosie's free generator. The asker's identity is neither imported nor published.

Rosie's answer

Published by SALUS

An emergency response drill for a thermal energy facility in Northern Alberta should comply with the Alberta Occupational Health and Safety (OHS) Code and focus on hazard control and risk mitigation. The plan should identify potential emergencies, detail procedures for dealing with these emergencies, and specify the location and operational procedures for emergency equipment and PPE. [2] [3]

Key components of the drill should include:

  • Emergency Response Plan (ERP): Develop a detailed ERP that includes potential emergencies (e.g., fires, explosions, chemical releases), evacuation procedures, and communication protocols.
  • Training and Competency: Ensure all workers, especially designated rescue and evacuation personnel, receive comprehensive training in emergency response, first aid, and the use of safety equipment. Conduct regular drills to maintain competency.
  • Emergency Equipment and PPE: Identify the location of emergency equipment and PPE. Ensure equipment is well-maintained and workers are trained in its proper use.
  • Communication and Alarm Systems: Establish reliable communication systems, including alarm systems, to promptly alert workers of emergencies. Regularly inspect and test these systems.
  • Rescue and Evacuation Procedures: Detail clear procedures for rescue and evacuation, including designated escape routes and refuge stations. Conduct annual mock evacuation exercises.
  • First Aid and Medical Services: Ensure adequate first aid services are available, with trained personnel and appropriate medical equipment on-site. Establish procedures for transporting injured workers to a health care facility.
  • Hazard Control and Risk Mitigation: Implement robust hazard control measures to prevent emergencies. This includes regular inspections, atmospheric monitoring, and adherence to safe work practices.
  • Site-Specific Orientation: Provide all workers with site-specific orientation that covers potential hazards, work procedures, hazard controls, required PPE, and the emergency response plan.
  • Coordination with External Responders: Establish communication and coordination protocols with local emergency services, including fire departments and medical responders.

[3] [1] Compliance with OHS Code:

  • Emergency Response Plan: Ensure the emergency response plan meets the requirements outlined in Part 7 of the OHS Code, including regular updates and worker involvement.
  • Training: Provide training that meets the requirements of the OHS Code, including exercises that simulate potential emergencies.
  • Equipment: Provide and maintain equipment and PPE appropriate to the work site and potential emergencies.
  • Reporting: Follow the OHS Code requirements for reporting dangerous occurrences and incidents.
3 source record(s)

Sources used for this answer

[1] Occupational Health and Safety Code (Alberta Regulation 191/2021)

Page 297

Open source document

Source excerpt

# Mining Operations and Mining Certificates (cont.) ## Suspension and cancellation (cont.) Section 750 OCCUPATIONAL HEALTH AND SAFETY CODE Part 37 AR 191/2021 # Part 37 Oil, Gas and Geothermal Energy ## Application 750 This Part applies to activities and ancillary processes associated with the exploration for, drilling for and extraction of oil, gas or geothermal energy and the decommissioning of related wells. AR 191/2021 s750;242/2022 ## Health and safety orientation 751.1 Before a worker comes on to a work site for the first time, a prime contractor or, if there is no prime contractor, an employer must ensure the worker completes site-specific orientation that encompasses (a) site-specific hazards, (b) work procedures that must be followed, (c) hazard controls in place to protect workers, (d) required personal protective equipment, (e) an emergency response plan, (f) processes for reporting hazards, (g) site-specific processes for addressing undue hazards, work refusals and resolution, and (h) any other matter required to ensure the health and safety of workers at the work site. - AR 242/2022 s155 ## Work site organization - 752.1(1) A prime contractor or, if there is no prime contractor, an employer must design and construct the work site in such a way to ensure that (a) the installation, operation, mobilization, demobilization and movement of all equipment will not create a hazard to workers, (b) the support of the gross weight of all equipment is under maximum loads, and (c) emergency response activities can be carried out. - 752.1(2) A prime contractor or, if there is no prime contractor, an employer must ensure the installation and use at the work site of (a) wind direction indicators located in strategic places and visible under all light conditions, and (b) if a harmful substance may exist, atmospheric monitoring equipment to monitor for harmful substances. - AR 242/2022 s155;202/2024 37-1 December, 2024

[2] Occupational Health and Safety Code (Alberta Regulation 191/2021)

Page 24

Open source document

Source excerpt

# OCCUPATIONAL HEALTH AND SAFETY CODE AR 191/2021 <table><tr><th>702.1</th><th>Refuge stations</th></tr><tr><td>703</td><td>Protection from contact with moving equipment</td></tr><tr><td>703.1</td><td>Emergency warning system</td></tr><tr><td>703.2</td><td>Evacuation</td></tr><tr><td>703.3</td><td>Emergency response station</td></tr><tr><td>703.4</td><td>Respiratory protective equipment for emergency escape</td></tr><tr><td colspan="2">Vehicles</td></tr><tr><td>704</td><td>Underground fuel stations</td></tr><tr><td>705</td><td>Diesel fuel</td></tr><tr><td>706</td><td>Control of equipment</td></tr><tr><td colspan="2">Roof and Side Support</td></tr><tr><td>707</td><td>Support system</td></tr><tr><td>708</td><td>Pillar extractions</td></tr><tr><td colspan="2">Ventilation System</td></tr><tr><td>711</td><td>Ventilation system</td></tr><tr><td>712</td><td>Air velocity</td></tr><tr><td>713</td><td>Return airway</td></tr><tr><td>714</td><td>Airlock doors</td></tr><tr><td>715</td><td>Stoppings</td></tr><tr><td>716</td><td>Seals</td></tr><tr><td>717</td><td>Chutes</td></tr><tr><td>718</td><td>Splits</td></tr><tr><td>719</td><td>Main fans</td></tr><tr><td>720</td><td>Reverse flows</td></tr><tr><td>721</td><td>Surface fans</td></tr><tr><td>722</td><td>Booster fans</td></tr><tr><td>723</td><td>Auxiliary fans</td></tr><tr><td>724</td><td>Brattice, vent tubes</td></tr><tr><td>725</td><td>Ventilation fans</td></tr><tr><td>729</td><td>Operating in split</td></tr><tr><td colspan="2">Gas and Dust Control</td></tr><tr><td>730</td><td>Gas inspections</td></tr><tr><td>731</td><td>Flammable gas levels</td></tr><tr><td>732</td><td>Diesel vehicle roads</td></tr><tr><td>733</td><td>Degassing procedures</td></tr><tr><td>738</td><td>Detection equipment for flammable and combustible gases</td></tr><tr><td>741</td><td>Roof bolting</td></tr><tr><td>742</td><td>Airborne dust control</td></tr><tr><td>743</td><td>Incombustible dust</td></tr></table> 22 December, 2024

[3] Occupational Health and Safety Code (Alberta Regulation 191/2021)

Page 87

Open source document

Source excerpt

# Material Hoists (cont.) ## Safe practices (cont.) Section 115 OCCUPATIONAL HEALTH AND SAFETY CODE Part 7 AR 191/2021 # Part 7 Emergency Preparedness and Response ## Emergency response plan - 115(1) An employer must establish an emergency response plan for responding to an emergency that may require rescue or evacuation. - 115(2) An employer must involve affected workers in establishing the emergency response plan. - 115(3) An employer must ensure that an emergency response plan is current. ## Contents of plan - 116 An emergency response plan must include the following: (a) the identification of potential emergencies; (b) procedures for dealing with the identified emergencies; (c) the identification of, location of and operational procedures for emergency equipment and personal protective equipment; (d) the emergency response training requirements; (e) the location and use of emergency facilities; (f) the fire protection requirements; (g) the alarm and emergency communication requirements; (h) the first aid services required; (i) procedures for rescue and evacuation; (j) the designated rescue and evacuation workers. ## Rescue and evacuation workers - 117(1) An employer must designate the workers who will provide rescue services and supervise evacuation procedures in an emergency. - 117(2) An employer must ensure that designated rescue and emergency workers are trained in emergency response appropriate to the work site and the potential emergencies identified in the emergency response plan. - 117(3) The training under subsection (2) must include exercises appropriate to the work site that simulate the potential emergencies identified in the emergency response plan. - 117(4) The training exercises referred to in subsection (3) must be repeated at the intervals required to ensure that the designated rescue and evacuation workers are competent to carry out their duties. 7-1

Related Q&A

Keep exploring.

Human questionGeneral

Hand protection

Hand Protection: Selecting and Using the Right Gloves ===================================================== *Date:** 2025-07-18 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective The objective of this talk is to provide you with the knowledge and guidelines to select and

Read the thread
Human questionGeneral

Create a safe work procedure for confined space entry

Safe Work Procedure: Confined Space Entry Document Number: [SWP-NUMBER] Revision Date: [DATE] Next Review Date: [NEXT REVIEW DATE] Department: [DEPARTMENT NAME] 1. Scope This procedure covers the safe entry, work, and exit from confined spaces. It applies to all employees and contractors who may be required to enter

Read the thread
Human questionGeneral

hazcom general industry

General Industry Hazard Communication Safety ============================================ *Date:** 2026-01-19 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure employees understand the importance of hazard communication and how to access and interpret safety

Read the thread
Human questionGeneral

what training is needed for a flag person in Saskatchewan

Safety Training Programs and Certifications for Traffic Control Persons in Saskatchewan Road Construction Zones =============================================================================================================== This document outlines the required safety training programs and certifications for traffic

Read the thread
Human questionGeneral

Sheave and alignment

Safe Work Procedure: Sheave and Alignment Document Number: [SWP-NUMBER] Revision Date: [DATE] Next Review Date: [NEXT REVIEW DATE] Department: [DEPARTMENT NAME] 1. Scope This Safe Work Procedure (SWP) outlines the necessary steps and safety precautions for performing sheave and alignment tasks. It applies to all

Read the thread
Human questionGeneral

Work procedure for an incident

Post-Incident Procedure ======================== Document Number: \[SWP-NUMBER] Revision Date: \[DATE] Next Review Date: \[NEXT REVIEW DATE] Department: \[DEPARTMENT NAME] 1\. Scope This safe work procedure outlines the steps to be taken following a workplace incident to ensure the safety of all personnel, to prevent

Read the thread
Discussion thread

Add your experience.

Community answers can add practical context. They are moderated, but they are not SALUS-reviewed safety guidance.

New contributions are temporarily closed while the moderation queue is configured.

Community answers(0)

No community answers have been approved yet.

Comments on Rosie's answer(0)

No comments have been approved yet.

Ready to put operational safety to work?

Join 400K users across 150K sites already on SALUS.

No commitment · 30-minute personalized walkthrough