Questions and practical guidance about injuries, near misses, reporting, investigation, corrective actions, and learning from incidents.
Safe Forklift Operation ======================= *Date:** 2026-08-07 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective Provide workers with practical guidance for safe forklift operation, including operator qualification, pre-use inspection, load handling, pedestrian
Read the threadHot Work Operations =================== Document Number: \[SWP-NUMBER] Revision Date: \[DATE] Next Review Date: \[NEXT REVIEW DATE] Department: \[DEPARTMENT NAME] 1\. Scope This safe work procedure applies to temporary hot work operations including welding, cutting, grinding, brazing, soldering, and related spark- or
Read the threadRisk Assessment for Blending Operations ======================================= *Assessment Date:** \[DATE] *Assessor:** \[ASSESSOR NAME] *Department/Area:** \[DEPARTMENT/AREA] *Review Date:** \[REVIEW DATE] 1\. Assessment Scope This assessment covers routine blending operations in a production or processing area
Read the threadIn British Columbia, there is no single stand-alone regulation that says every supervisor must complete one universal supervisory OHS course. However, employers are required under WorkSafeBC’s Occupational Health and Safety Regulation to provide instruction and supervision, and many hazard-specific parts of the
Read the threadRisk Assessment for Scaffold Erection and Dismantling Activities ================================================================ *Assessment Date:** \[DATE] *Assessor:** \[ASSESSOR NAME] *Department/Area:** \[DEPARTMENT/AREA] *Review Date:** \[REVIEW DATE] 1\. Assessment Scope This risk assessment covers scaffold
Read the threadSummer Safety: Heat Stress, Hydration, Sun Exposure, and Outdoor Work Hazards ============================================================================= *Date:** 2026-07-23 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To help workers recognize heat-related
Read the threadWorkplace Safety Risk Assessment Documentation ============================================== *Assessment Date:** \[DATE] *Assessor:** \[ASSESSOR NAME] *Department/Area:** \[DEPARTMENT/AREA] *Review Date:** \[REVIEW DATE] 1\. Assessment Scope This risk assessment covers general workplace activities associated with
Read the threadSafety Data Sheets (SDSs) are core hazard communication documents. They summarize a product’s hazards, safe handling precautions, exposure controls, emergency response, and other regulatory information so workers and employers can identify risks and protect against them. Under WHMIS, hazardous products used, handled
Read the threadRisk Assessment for Lifting Operations and Lifting Work Activities ================================================================== *Assessment Date:** \[DATE] *Assessor:** \[ASSESSOR NAME] *Department/Area:** \[DEPARTMENT/AREA] *Review Date:** \[REVIEW DATE] 1\. Assessment Scope This risk assessment covers lifting
Read the threadRisk Assessment and Safe System of Work for Roof Replacement Activities ======================================================================= *Assessment Date:** \[DATE] *Assessor:** \[ASSESSOR NAME] *Department/Area:** \[DEPARTMENT/AREA] *Review Date:** \[REVIEW DATE] 1\. Assessment Scope This risk assessment covers
Read the threadGeneral Use Generator Risk Assessment ===================================== *Assessment Date:** \[DATE] *Assessor:** \[ASSESSOR NAME] *Department/Area:** \[DEPARTMENT/AREA] *Review Date:** \[REVIEW DATE] 1\. Assessment Scope This risk assessment covers the selection, positioning, operation, refueling, inspection
Read the threadLoud Music and Excessive Noise on Site ====================================== *Date:** 2026-07-14 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective Provide workers with practical guidance to recognize hazardous noise, protect their hearing, maintain effective
Read the threadLaser Cutter Hazard Risk Assessment =================================== *Assessment Date:** \[DATE] *Assessor:** \[ASSESSOR NAME] *Department/Area:** \[DEPARTMENT/AREA] *Review Date:** \[REVIEW DATE] 1\. Assessment Scope This risk assessment covers the operation, setup, loading and unloading, routine cleaning
Read the threadManual Handling Safety ====================== *Date:** 2026-07-07 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective This toolbox talk aims to reinforce safe manual handling practices to prevent musculoskeletal injuries, reduce strain from lifting and carrying, improve
Read the threadSpill Response Process ====================== *Date:** 2026-07-07 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective Provide workers with a practical understanding of hazardous material spill response procedures, including immediate emergency actions, containment and
Read the threadLoading and Unloading Plant and Machinery Risk Assessment ========================================================= *Assessment Date:** \[DATE] *Assessor:** \[ASSESSOR NAME] *Department/Area:** \[DEPARTMENT/AREA] *Review Date:** \[REVIEW DATE] 1\. Assessment Scope This risk assessment covers the loading, unloading
Read the threadFormal Hazard Assessment Procedures and Risk Assessment Documentation ===================================================================== *Assessment Date:** \[DATE] *Assessor:** \[ASSESSOR NAME] *Department/Area:** \[DEPARTMENT/AREA] *Review Date:** \[REVIEW DATE] 1\. Assessment Scope This risk assessment covers the
Read the threadDriving safety hazards arise from the interaction of the driver, vehicle, road, environment, and work demands. Key risk factors include distracted driving, fatigue, speeding, impairment, adverse weather, poor road conditions, vehicle defects, and inadequate traffic control. A safe driving program should require
Read the threadPortable Appliance Testing (PAT) in an Electrical Inverter Production Facility ============================================================================== *Assessment Date:** \[DATE] *Assessor:** \[ASSESSOR NAME] *Department/Area:** \[DEPARTMENT/AREA] *Review Date:** \[REVIEW DATE] 1\. Assessment Scope This risk
Read the threadHigh-Rise Building Window Glass Cleaning Using a Building Maintenance Unit (BMU) ================================================================================= *Assessment Date:** \[DATE] *Assessor:** \[ASSESSOR NAME] *Department/Area:** \[DEPARTMENT/AREA] *Review Date:** \[REVIEW DATE] 1\. Assessment Scope This
Read the threadRisk Assessment and Job Hazard Analysis (JHA/JSA) Procedures for Workplace Hazard Identification and Control ============================================================================================================ *Assessment Date:** \[DATE] *Assessor:** \[ASSESSOR NAME] *Department/Area:** \[DEPARTMENT/AREA]
Read the threadRisk Assessment for Installing a Bedroom Air Conditioning Unit ============================================================== *Assessment Date:** \[DATE] *Assessor:** \[ASSESSOR NAME] *Department/Area:** \[DEPARTMENT/AREA] *Review Date:** \[REVIEW DATE] 1\. Assessment Scope This assessment covers the installation of a
Read the threadAdverse weather involving high winds and reduced visibility can create a high-risk work environment because workers may lose balance, be struck by airborne objects, experience eye or respiratory exposure to dust and debris, face equipment or scaffold instability, and encounter downed power lines, falling trees, broken
Read the threadFor house refurbishment and renovation works, the risk assessment should be task-specific, site-specific, and reviewed as the job changes. Under UK good practice and CDM principles, start by identifying hazards, who may be harmed, existing controls, and additional controls required, then communicate the findings to all
Read the threadFit for work means a worker is able to perform assigned duties safely and to an acceptable standard for that task or shift. A toolbox talk on fit for work should make clear that fitness for duty is not limited to alcohol or drugs; it also includes fatigue, illness, mental health, physical capability, medication
Read the threadManual handling of heavy materials is a major construction hazard because back injuries, sprains, strains, and other musculoskeletal disorders can result from heavy lifting, repetitive handling, awkward postures, bending from the floor, carrying loads over distance, and twisting while moving materials. Slip and trip
Read the threadA suitable RAMS for installing a front-side LED screen at an operating ENOC fuel station C-store should classify the work as high-risk construction in a live fuel-retail environment and require a task-by-task hazard assessment before work starts. The assessment should apply the hierarchy of controls, prioritizing
Read the threadA suitable risk assessment and safe system of work for a ground-mounted solar PV installation should be task-specific, site-specific, and reviewed as the work progresses. It should identify the jobs or tasks being done, the hazards workers are exposed to, where the hazards are located, the likelihood and severity of
Read the threadJune Environmental Awareness Month: Environmental Protection, Sustainability, and Compliance Leadership ======================================================================================================= *Date:** 2026-05-31 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION]
Read the threadSilica Awareness Safety Training and Safe Work Procedure for Construction Activities ==================================================================================== Document Number: \[SWP-NUMBER] Revision Date: \[DATE] Next Review Date: \[NEXT REVIEW DATE] Department: \[DEPARTMENT NAME] 1\. Scope This safe work
Read the threadWorkers generally have three core occupational health and safety rights under workplace health and safety legislation: the right to know about hazards, the right to participate in health and safety activities, and the right to refuse unsafe or dangerous work. Employers must inform workers of known or likely hazards and
Read the threadA suitable risk assessment for cable management activities should begin with a task-based hazard assessment that identifies the job steps, the hazards present, where they are located, the likelihood of injury, the severity of harm, and the PPE needed. For cable management, this means assessing activities such as moving
Read the threadA suitable risk assessment for operating an articulated dumper truck in a quarry should identify the task steps, the hazards at each stage, the likelihood and severity of harm, and the controls required before work starts. The assessment should cover driving, loading, travelling, reversing, tipping, parking
Read the threadA safe vacuum truck operation program should be built around a documented risk assessment and job safety analysis for each job, using the hierarchy of controls first and PPE last. Before work starts, supervisory personnel and operators should pre-plan the job, confirm the equipment is appropriately sized and rated
Read the threadA suitable risk assessment and safe operating procedure for container loading and unloading with a picker vehicle should be task-based and documented before work starts. The assessment should identify hazards such as struck-by, crushed-by, falling loads, trailer movement, unstable ground, poor lighting, blind spots
Read the threadIn British Columbia, a person can only serve as a workplace first aid attendant if they hold a valid first aid certificate at the required level, issued by WorkSafeBC or by a person recognized by WorkSafeBC, and are designated by the employer. The regulation does not set a standalone renewal interval in the excerpts
Read the threadSafe off-loading of bulk materials requires a planned system of work that controls vehicle movement, ground conditions, load behavior, worker positioning, and communication before unloading starts. A suitable approach is to complete a task-specific hazard identification and risk assessment, brief all involved workers
Read the threadCurtain installation work should be assessed task-by-task using a job hazard analysis that identifies the hazard type, source, body parts at risk, severity, probability, and risk code, then applies controls in the order of engineering, work-practice/administrative controls, and PPE. For this work, the main hazards are
Read the threadA piling rig safety checklist should require a documented pre-start inspection, confirmation that the rig is operated within manufacturer limits, and verification that all required records, load information, and safety devices are in place before work begins. Check the mast/leader, winches, hoisting lines, hooks
Read the threadA railway safety toolbox talk should begin with the rule that no one goes on or near the line without an authorized safe system of work, a task briefing, and a clear understanding of hazards, limits, and emergency arrangements. Key rail work hazards include moving trains and on-track plant, electrical hazards from
Read the threadUnder WorkSafeBC OHS Regulation Part 3 and Schedule 3-A, employers in British Columbia must provide at least the first aid equipment, supplies, facilities, attendants and services specified for the workplace class, worker count and hazard rating, and must add anything further that is necessary to ensure injured workers
Read the threadIn British Columbia, construction site orientation should be treated as a documented, site-specific process completed before work begins, especially for young or new workers. At minimum, orientation must cover the worker’s supervisor contact information; worker and employer rights and responsibilities; reporting unsafe
Read the threadFor construction or industrial worksites in British Columbia, site orientation and worker onboarding should be treated as a mandatory, documented, site-specific process under the Workers Compensation Act framework and the Occupational Health and Safety Regulation. At minimum, every young or new worker must receive
Read the threadA safe work procedure for a drop saw (mitre/chop saw) should cover the full task lifecycle: hazard identification, risk assessment, inspection, guarding, PPE, operation, isolation, maintenance, emergency response, and legal compliance. The main hazards are contact with the rotating blade causing severe cuts or
Read the threadA suitable risk assessment and safe work method statement for aluminum canopy installation and fabrication works should identify each task, assess the hazards, rate the risk, and apply controls using the hierarchy of controls. For canopy works, the highest-risk activities typically include working at height, lifting
Read the threadHand-arm vibration syndrome (HAVS) is caused by vibration transmitted into the hands and arms from hand-held power tools and vibrating equipment. In construction, common sources include jackhammers, hammer drills, impact wrenches, chainsaws, grinders, pneumatic tools, and similar equipment. HAVS damages nerves, blood
Read the threadA construction site procedure for public riots or civil unrest should be built into the written emergency response plan and integrated with the site safety and health plan. At minimum, the plan should define pre-emergency coordination with police, fire, EMS, client representatives, and neighboring properties; personnel
Read the threadA comprehensive HIRA/JSA/JHA/TRA program for a project should define a documented, repeatable process that begins in planning and continues through execution, change management, and closeout. At its core, risk assessment is the process of identifying hazards, assessing the risk associated with each hazard, prioritizing
Read the threadEmergency Stop (E-Stop) Procedures =================================== *Date:** 2026-04-01 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To understand the correct procedures for activating and deactivating emergency stops, and to reinforce adherence to safety
Read the threadElectrical Wire Stripping Safety ================================ *Date:** 2026-03-26 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To understand and apply the correct procedures for safely stripping electrical wires, including hazard identification, control
Read the threadBall Mill Installation Risk Assessment ====================================== *Assessment Date:** \[DATE] *Assessor:** \[ASSESSOR NAME] *Department/Area:** \[DEPARTMENT/AREA] *Review Date:** \[REVIEW DATE] 1\. Assessment Scope This risk assessment covers the installation of a new ball mill, including all associated
Read the threadSpring Hazards and Controls for Electrical Work =============================================== *Date:** 2026-03-23 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To provide electricians with essential information on identifying and controlling spring-related hazards
Read the threadLockout/Tagout (LOTO) Safe Work Procedure ========================================= Document Number: \[SWP-NUMBER] Revision Date: \[DATE] Next Review Date: \[NEXT REVIEW DATE] Department: \[DEPARTMENT NAME] 1\. Scope This safe work procedure outlines the requirements for lockout/tagout (LOTO) to ensure machinery and
Read the threadWorking at height necessitates specific safety training and fall protection measures to prevent injuries and fatalities. Regulations and industry best practices emphasize hazard identification, proper equipment use, and rescue planning. Training Requirements: Jurisdictions in Canada mandate education and training
Read the threadEye Protection Safety ===================== *Date:** 2026-03-18 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To understand the importance of eye protection, identify potential hazards, and select appropriate PPE to prevent eye injuries in the workplace.
Read the threadSkid Steer Operation Safe Work Procedure ======================================== Document Number: \[SWP-NUMBER] Revision Date: \[DATE] Next Review Date: \[NEXT REVIEW DATE] Department: \[DEPARTMENT NAME] 1\. Scope This safe work procedure (SWP) outlines the necessary steps and safety precautions for the safe operation
Read the threadHere are ten essential components of a comprehensive workplace safety program: 1\. Hazard Identification, Assessment, and Control: Identifying potential hazards, assessing the risks associated with those hazards, and implementing controls to minimize or eliminate those risks. This includes conducting workplace
Read the threadTo prevent impalement injuries from rebar on construction sites, several safety requirements and regulations must be followed: Guarding: Protruding reinforcing steel must be guarded to eliminate the hazard of impalement. This includes situations where rebar is below grade or in a basement. [1] • Protective Covers: Use
Read the threadAdherence to Safety Protocols and Procedures ============================================ *Date:** 2026-03-11 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To reinforce the importance of following established safety protocols and procedures to minimize workplace
Read the threadSafe Installation of Formers for Bricklaying ============================================ *Date:** 2026-03-11 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure bricklayers understand and implement safe practices for installing formers, complying with
Read the threadJoin 400K users across 150K sites already on SALUS.
No commitment · 30-minute personalized walkthrough
