Head Protection PPE

Source excerpt

WORK SAFE KENTUCKY Free safety resources provided by KEMI HOME SAFETY RESOURCES SAFETY TRAINING SAFETY BLOG ABOUT KEMI CONTACT US O # Personal Protective Equipment (PPE) ## Print a Sign-In Sheet | Spanish Version Proper use of PPE can be an employee's most important means of protection on the job. Employers and employees must work together to ensure the greatest possible protection from hazards in the workplace and maintain a safe and healthy work environment. Employers should: • Perform a hazard assessment of the workplace to identify areas requiring the use of PPE. • Identify and provide appropriate PPE for employees. • Train employees in the use and care of PPE. • Maintain PPE, including replacing worn or damaged PPE. • Periodically review, update, and evaluate the effectiveness of the PPE program. Employees should: • Properly wear PPE. • Attend training sessions on PPE. • Care for, clean, and maintain PPE. • Inform a supervisor of the need for repair or replacement of PPE. Search ## Safety Blog KEMI recognizes 27 Kentucky employers for workplace safety KY Organizations Recognized for Keeping Workers Safe KEMI Announces Destiny Award Winners for 2021 Remember to use a Sign-In Sheet to document your safety training. Follow us on Social Media Specific requirements for PPE are presented in many different Occupational Safety and Health Administration (OSHA) standards (published in 29 CFR). Please refer to OSHA regulations for more information. KEMI does not assume liability for the content of information contained herein. Safety and health remain your responsibility. This information is to be used for informational purposes only and not intended to be exhaustive or a substitute for proper training, supervision, or manufacturers' instructions/recommendations. KEMI, by publication of this information, does not assume liability for damage or injury arising from reliance upon it. Compliance with this information is not a guarantee or warranty…

Source excerpt

# TABLE OF CONTENTS (cont.) ## A. 1910.132 General Requirements. (cont.) 1. The requirement for employers to conduct engineering and work practice controls appears in several substance-specific standards (e.g., the asbestos standard at 1910.1001(f)). CSHOS shall cite the respirator provisions of substance-specific Part 1910 standards when those standards apply (e.g., the asbestos standard at 1910.1001(g)). Cite 1910.1000(e)) when the substance is listed in Table Z of 29 CFR 1910.1000. The requirement for employers to provide respirators is found in several substance-specific Part 1910 standards (e.g., the lead standard at 1910.1025(e) and (f)). CSHOS shall cite the respirator provisions of substance-specific standards when those standards apply. Cite 1910.134(a)(2) when the substance is listed only in Table Z of 1910.1000. Respirator violations are normally grouped with the overexposure to substances regulated by other standards. 2. The employer must provide the right type of respirator for the substance and level of exposure involved. Respiratory protection equipment includes: filtering face pieces (dust masks) and other air-purifying respirators; atmosphere-supplying respirators, including supplied-air respirators and self-contained breathing apparatus; and escape-only respirators. Unless a substance-specific standard applies, citations shall be issued under 1910.134(d) if an employer fails to provide an appropriate respirator. For complete enforcement guidance on respiratory protection, see VOSH Program Directives 02-411, Inspection Procedures for the Respiratory Protection Program and 09-003, VOSH Field Operations Manual. D. 1910.135 Head protection. - CSHOS shall determine compliance with head protection requirements in 1910.135(a). Employers must require employees to wear a protective helmet or hard hat when working in areas where there is potential for injury to the head from falling objects (1910.135(a)(1)). A protective helmet designed to reduce ele…

Source excerpt

CPWR TOOLBOX THE CENTER FOR CONSTRUCTION RESEARCH AND TRAINING TALK # Head Protection The hard hat is one of the most widely used and important pieces of personal protective equipment (PPE) on the job. Hard hats protect workers from head injuries due to falling objects and overhead hazards. ## Bob's Story Bob and his crew were putting a new roof on a house. During his lunch break, Bob was on the ground eating a sandwich. A worker on the roof dropped his hammer. The falling hammer struck Bob's hard hat. Although Bob had some pain and discomfort, he did not need hospitalization. - Have you or someone you know ever had their hard hat prevent an injury? If so, what happened? - How could this incident have been prevented? ## Remember This ➤ On a jobsite, always wear a hard hat that fits properly. ➤ Always wear your hard hat with the bill facing forward. Certification by ANSI does not cover hard hats worn backwards. ➤ Always avoid contact between the hard hat and electric wires. ➤ Always keep the space between the shell and the head clear. For example, don't wear a ball cap or other object under your hard hat. Never alter its shell or suspension, because that could drastically reduce the protection it gives. ➤ Never use a cushion-support suspension that is intended for use with a different hard hat shell or that is made by a different manufacturer. ➤ If you wear eye protection, use a kind designed to work with hard hats. Be sure to follow the maker's instructions for use. How can we stay safe today? What will we do at the worksite to promote hard hat use and prevent head injuries? - 1. - 2. OSHA Regulation: 1926.100 ©2017, CPWR-The Center for Construction Research and Training. All rights reserved. CPWR is the research and training arm of NABTU. Production of this document was supported by cooperative agreement OH 009762 from the National Institute for Occupational Safety and Health (NIOSH). The contents are solely the responsibility of the authors an…

Source excerpt

# PPE Fact Sheet-The Right Equipment—Head to PPE is the last line of defense against workplace hazards. OSHA defines PPE as "equipment for the eyes, face, head, and extremities, protective clothing, respiratory devices, protective shields and barriers." Many OSHA regulations state that PPE must meet criteria set by the American National Standards Institute (ANSI). ## Head Protection HEAD PROTECTION OSHA requires that head protection (hard hats) be worn if there is a risk of head injury from electrical burns or falling/flying objects. ## Aren't all hard hats the same? No. You must wear the right hat for the job. All hard hats approved for electrical work made since 1997 are marked "Class E." Hard hats made before 1997 are marked "Class B." These markings will be on a label inside the helmet or stamped into the helmet itself. Newer hats may also be marked "Type 1" or "Type 2." Type 1 hard hats protect you from impacts on the top of your head. Type 2 hard hats protect you from impacts on the top and sides of your head. ## How do I wear and care for my hard hat? Always wear your hat with the bill forward. (Hats are tested in this position.) If you wear a hat differ- ently, you may not be fully protected. The hat should fit snugly without being too tight. You should clean and inspect your hard hat regularly according to the man- ufacturer's instructions. Check the hat for cracks, dents, frayed straps, and dulling of the finish. These conditions can reduce protection. Use only mild soap and water for clean- ing. Heavy-duty cleaners and other chemicals can damage the hat. Don't wear another hat under your hard hat! WARNING PORE READ ALL WARNINGS AND INSTRUCTIONS ANSI 289.1-1997 ALGE MAS KAFESWON Class E, Type 1 hard hat. CLASS-AD ANGI 20011933 [redacted identifier] Class B hard hat. Page 68 Section 8