link for mobile app

Source excerpt

# Dome Light (27) (cont.) ## Bluetooth Entry (cont.) M0080149-06 Operation Section Machine Security System 143 00 11.07 Engine Start Alowed Fasten Seat Bet Illustration 200 g06209482 4. After an operator logs in to the system successfully, an "Engine Start Allowed" message will appear across the top of the monitor. Refer to Operation and Maintenance Manual, Engine Starting for instructions on starting the engine. ## NOTICE The access level will change to a "Guest" account au- tomatically if the key is removed from the cab at any time. If the MSS is enabled and the engine is on when the key is removed from the cab, the operator will not be able to start the engine if turned off. To turn on the engine again without the Bluetooth key, the operator will need to log in a registered account using either the smart phone application or passcode. Note: If multiple Bluetooth devices are within the cab, the system will select the first device detected by the Bluetooth transceiver as the active operator. ## Cat ⓇFleet Management Mobile Application Operators can also log in to a machine using the Cat App: Fleet management mobile application. For the application to be detected by the system, ensure that the following qualifications are met: The Mobile Device ID (MDID) of the mobile application must be assigned to the machine in the Operator Management System (OMS) Note: It is not possible to assign mobile devices through the MSS interface. The mobile device must be within the cab • "Operator Management Bluetooth Device Enabled Status" is enabled (Cat ET Configuration) Note: For adding an operator, adding MDID to the machine key list, and pushing the machine key list from the OMS to the machine refer to the OMS documentation at: https://myoperators.cat.com/ ## Mobile Device/Operating Software Compatibility Table 15 <table><tr><th colspan="3">Mobile Device/Operating Software Compatibility</th></tr><tr><td>Make</td><td>Model</td><td>Operating Software</td></tr…

Source excerpt

# Dome Light (27) (cont.) ## Operation in a Blast Site for Product Link Radios (cont.) M0101823-03 163 Operation Section Machine Security System - Special Instruction, REHS9111, "Installation Procedure for the Pro Product Link PL641 and PL631 Systems" • Special Instruction, M0098124, "Installation Procedure for Pro Product Link PL243 Systems" - Special Instruction, M0109130, "Installation Procedure for Product Link PL683 and PL783 Systems" i07785958 ## Machine Security System SMCS Code: 7631 ## General Information ## NOTICE This machine may be equipped with a Cat ® Machine Security System (MSS) and may not start under cer- tain conditions. Illustration 178 g06223917 Machines that are equipped with Cat MSS can be identified by a decal in the operator station Read the following information and know your machines settings. Your Cat dealer can identify your machine settings. The Cat Machine Security System (MSS) discourages unwanted operation of a machine. When armed, the MSS requires operator login to start the engine. The following methods of operator login to disarm the security system are available: - Cat Bluetooth® key fob - Cat App: Fleet Management - Passcode CAT 0 Illustration 179 g06212167 Bluetooth Connections (1) Cat Bluetooth key fob (CATBTFOB) (2) Cat App: Fleet Management mobile application (3) Cat Bluetooth transceiver (CATBTNT) The Cat Bluetooth key fob (1) contains an electronic chip. The electronic chip has a unique identification number (ID). A Bluetooth transceiver is mounted in the cab to read the ID of the key. The Bluetooth transceiver module translates the information received from the key fob into a J1939 message. This message is sent to the Electronic Control Module (ECM) that is connected to the MSS. The ECM is typically the Machine ECM. The ECM is set up with the ID of the keys of the intended users. When the MSS is armed, the ECM validates the ID of the key fob. If the key ID is on the list of authorized keys i…

Source excerpt

# Operation Section Machine Security System (cont.) 154 M0106778-03 # Operation Section Machine Security System 0.0h 11:07 SMART Engine X Start Allowed < > Fasten Seat Belt Illustration 187 g06209482 13. After an operator logs in to the system successfully, an "Engine Start Allowed" message will appear across the top of the monitor. Refer to Operation and Maintenance Manual, Engine Starting for instructions on starting the engine. ## Mobile Application Entry (iOS Devices) To log in using the Cat App: Fleet management mobile application, refer to the following steps: B A Illustration 188 (A) Off (B) On (1) Engine start switch ring (2) Engine start button g06180554 1. Turn engine start switch (1) to the ON position (B). 2. Ensure that Bluetooth detection is enabled on the in-cab display. CAT Illustration 189 g06400799 Cat App: Fleet management mobile application icon 3. Open the Cat App: Fleet management mobile application on the mobile device. 3:45 PM IPG Rating: Caterpillar Confidential Green CAT Version: 1.10.3 (1) Swipe to learn more Login Get Started Agree Please read and agree with the Data Privacy Notice, Open Source License Agreement, End User License Agreement Illustration 190 g06433528 4. Click "I Agree" to agree with the End-User License Agreement and sign in with Cat eCustomer account credentials. - Note: If you do not have a Cat eCustomer account, click "Get Started" to create one. 5. Select "Login".