Skip to content
All safety questions
Asked by a personCanadaen-CA

Pel of so2 exposure

A person submitted this question to Rosie's free generator. The asker's identity is neither imported nor published.

Rosie's answer

Published by SALUS

Sulfur Dioxide Safety: Exposure Limits and Prevention =====================================================

This document outlines the permissible exposure limits (PEL) for sulfur dioxide (SO2\) and details the safety measures necessary to prevent overexposure. It is based on industry best practices and guidelines to ensure workplace safety.

Permissible Exposure Limits (PELs)

ACGIH® Recommended Exposure Limit

The American Conference of Governmental Industrial Hygienists (ACGIH®) recommends a Threshold Limit Value (TLV®) - Short-term Exposure Limit (STEL) \[C] of 0\.25 ppm for sulfur dioxide. This is a ceiling limit, meaning it should not be exceeded at any time. The A4 notation indicates that it is 'Not classifiable as a human carcinogen'. [1] [1]

Canadian Jurisdictions

In many Canadian jurisdictions, the exposure limits are similar to the ACGIH® TLVs®. Exact details vary by jurisdiction, so local occupational health and safety departments should be contacted for specific information. [1]

Safety Measures to Prevent Overexposure

Engineering Controls

The primary method for controlling sulfur dioxide exposure is through engineering controls. These include:

  • Local exhaust ventilation and enclosure to control the amount of sulfur dioxide in the air.
  • Stringent control measures such as process enclosure to prevent product release into the workplace.
  • A corrosion-resistant exhaust ventilation system separate from other ventilation systems.
  • Exhaust directly to the outside, taking necessary precautions for environmental protection.
  • Provision of eyewash and safety showers where contact or splash hazards exist.

[1]

Personal Protective Equipment (PPE)

When engineering controls are not sufficient to maintain exposure below the PEL, personal protective equipment (PPE) must be used. Appropriate PPE for sulfur dioxide includes:

  • Chemical safety goggles and face shield when contact is possible.
  • Chemical protective clothing such as gloves, aprons, and boots. Suitable materials include Viton®, Viton®/butyl rubber, Kemblok ®, Saranex®ᵀM, Chemprotex® 300, ChemMAX® (3, 4 Plus), AlphaTec® (4000, EVO, VPS), Tychem® (9000, Responder CSM, 10000, 10000FR) Zytron® 500\. Natural rubber and nitrile rubber are not recommended.
  • Respiratory protection, with specific respirator types depending on the concentration of sulfur dioxide. Refer to the NIOSH Pocket Guide to Chemical Hazards for more information.

[3] [3] [3]

Respiratory Protection Levels

The following respiratory protection levels are recommended based on sulfur dioxide concentration:

  • Up to 20 ppm: Any chemical cartridge respirator with cartridge(s) providing protection against sulfur dioxide; or Any supplied-air respirator.
  • Up to 50 ppm: Any supplied-air respirator operated in a continuous-flow mode; Any powered, air-purifying respirator with cartridge(s) providing protection against the compound of concern.
  • Up to 100 ppm: Any chemical cartridge respirator with a full facepiece and cartridge(s) providing protection against the compound of concern; Any air-purifying, full-facepiece respirator (gas mask) with a chin-style, front- or back-mounted canister providing protection against the compound of concern; Any powered, air-purifying respirator with a tight-fitting facepiece and cartridge(s) providing protection against the compound of concern; Any supplied-air respirator that has a tight-fitting facepiece and is operated in a continuous-flow mode; Any self-contained breathing apparatus with a full facepiece; Any supplied-air respirator with a full facepiece.

[3]

Handling and Storage

  • Secure cylinders in an upright position and protect them from damage. Use a suitable hand truck to move cylinders; do not drag, roll, slide, or drop.
  • Keep containers tightly closed when not in use or empty. Use corrosion-resistant tools and equipment.
  • Store in a cool, dry, well-ventilated, and temperature-controlled area, separate from incompatible materials, out of direct sunlight and away from heat and ignition sources.
  • Restrict access to authorized personnel only.
  • Have escape-type respiratory protective equipment readily available in case of leaks or spills.
  • Always secure cylinders in an upright position to a wall, rack, or other solid structure.
  • Store empty containers separately and keep them closed, as they may contain hazardous residue.

[1] [1]

Unintentional Release Measures

  • In the event of a spill or leak, immediately put on escape-type respirator and exit the area.
  • Report leaks, spills, or failures of safety equipment immediately.
  • Get medical attention for all exposures; symptoms can be delayed.
  • Use personal protective equipment as required.
  • Increase ventilation to the area or move the leaking container to a well-ventilated and secure area.
  • Stop or reduce the leak if safe to do so.
  • Knock down gas with fog or fine water spray. Be aware that the resulting sulfuric acid solutions are very corrosive and toxic.
  • Dike and recover contaminated water for appropriate disposal.
  • Contact the supplier and local fire and emergency services for help.

[1] [4] [4] [4]

First Aid Measures

Inhalation:
Inhalation

Take precautions to ensure your own safety before attempting rescue (e.g., wear appropriate protective equipment). Move victim to fresh air. If breathing is difficult, trained personnel should administer emergency oxygen. If breathing has stopped, trained personnel should begin artificial respiration (AR). DO NOT allow victim to move about unnecessarily. Symptoms of pulmonary edema may be delayed. Get medical attention immediately. Treatment is urgently required. Transport to a hospital. [2]

Skin Contact:
Skin Contact

Gas: flush with gently flowing water Get medical attention. Liquefied gas: quickly remove victim from source of contamination. DO NOT attempt to rewarm the affected area on site. DO NOT rub area, flush with water, or apply direct heat. Carefully cut around clothing that sticks to the skin and remove the rest of the garment. Do not remove frozen clothing from frostbitten areas. Loosely cover the affected area with a sterile dressing. DO NOT allow victim to drink alcohol or smoke. Get medical attention immediately. Treatment is urgently required. Transport to a hospital. Double bag, seal, label and leave contaminated clothing, shoes, and leather goods at the scene for safe disposal. [2]

Eye Contact:
Eye Contact

Gas: move victim to fresh air. Immediately flush the contaminated eye(s) with gently flowing water, occasionally lifting the upper and lower eyelids. Liquefied gas: avoid direct contact. Wear chemical protective gloves if necessary. Immediately flush with gently flowing water. DO NOT attempt to rewarm. Cover both eyes with a sterile dressing. DO NOT allow victim to drink alcohol or smoke. Get medical attention immediately. Treatment is urgently required. Transport to a hospital. [2]

Ingestion:
Ingestion

Not applicable (gas). [2]

Stability and Reactivity Hazards

  • Normally stable.
  • Avoid water, moisture, or humidity.
  • Incompatible with halogens (e.g., chlorine) and strong bases (e.g., sodium hydroxide).
  • Corrosive to aluminum alloys and carbon steel in the presence of water.
  • On reaction with water: sulfurous acid solution.

[4] [4] [4] [4]

Safety powered by SALUS

4 source record(s)

Sources used for this answer

[1] Sulfur Dioxide

Page 4

Open source document

Source excerpt

# Sulfur Dioxide (cont.) ## What are the potential health effects of sulfur dioxide? (cont.) - Ingestion: Not a relevant route of exposure (gas). - Effects of Long-Term (Chronic) Exposure: May harm the respiratory system. Can irritate and inflame the airways. - Carcinogenicity: Not known to cause cancer. - International Agency for Research on Cancer (IARC): Group 3 - Not classifiable as to its carcinogenicity to humans. - American Conference for Governmental Industrial Hygienists (ACGIH): A4 - Not classifiable as a human carcinogen. - Teratogenicity I Embryotoxicity: Not known to harm the unborn child. - Reproductive Toxicity: Not known to be a reproductive hazard. - Mutagenicity: Suspect mutagen. May cause genetic damage based on animal information. ## What are first aid measures for sulfur dioxide? Inhalation: Take precautions to ensure your own safety before attempting rescue (e.g., wear appropriate protective equipment). Move victim to fresh air. If breathing is difficult, trained personnel should administer emergency oxygen. If breathing has stopped, trained personnel should begin artificial respiration (AR). DO NOT allow victim to move about unnecessarily. Symptoms of pulmonary edema may be delayed. Get medical attention immediately. Treatment is urgently required. Transport to a hospital. Skin Contact: Gas: flush with gently flowing water Get medical attention. Liquefied gas: quickly remove victim from source of contamination. DO NOT attempt to rewarm the affected area on site. DO NOT rub area, flush with water, or apply direct heat. Carefully cut around clothing that sticks to the skin and remove the rest of the garment. Do not remove frozen clothing from frostbitten areas. Loosely cover the affected area with a sterile dressing. DO NOT allow victim to drink alcohol or smoke. Get medical attention immediately. Treatment is urgently required. Transport to a hospital. Double bag, seal, label and leave contaminated clothing, shoes, and leath…

[2] Sulfur Dioxide

Page 7

Open source document

Source excerpt

# What Personal Protective Equipment (PPE) is needed when working with sulfur dioxide? Eye/Face Protection: Wear chemical safety goggles and face shield when contact is possible. Skin Protection: Wear chemical protective clothing e.g. gloves, aprons, boots. Suitable materials include: Viton®, Viton®/butyl rubber, Kemblok ®, Saranex®ᵀM, Chemprotex® 300, ChemMAX® (3, 4 Plus), AlphaTec® (4000, EVO, VPS), Tychem® (9000, Responder CSM, [redacted postal code], 10000FR) Zytron® 500. Not recommended: natural rubber, nitrile rubber, Tychem® (6000, 6000 FR) ## Respiratory Protection: Up to 20 ppm: (APF = 10) Any chemical cartridge respirator with cartridge(s) providing protection against sulfur dioxide*; or Any supplied-air respirator* Up to 50 ppm: (APF = 25) Any supplied-air respirator operated in a continuous-flow mode*; Any powered, air-purifying respirator with cartridge(s) providing protection against the compound of concern* Up to 100 ppm: (APF = 50) Any chemical cartridge respirator with a full facepiece and cartridge(s) providing protection against the compound of concern; Any air-purifying, full-facepiece respirator (gas mask) with a chin-style, front- or back-mounted canister providing protection against the compound of concern; Any powered, air-purifying respirator with a tight-fitting facepiece and cartridge(s) providing protection against the compound of concern*; Any supplied-air respirator that has a tight-fitting facepiece and is operated in a continuous-flow mode*; Any self-contained breathing apparatus with a full facepiece; Any supplied-air respirator with a full facepiece. *Reported to cause eye irritation or damage; may require eye protection. APF = Assigned Protection Factor Recommendations apply only to National Institute for Occupational Safety and Health (NIOSH) approved respirators. Refer to the NIOSH Pocket Guide to Chemical Hazards for more information. Fact sheet last revised: 2023-01-27 ## Disclaimer Although every effort is made to en…

[3] Sulfur Dioxide

Page 5

Open source document

Source excerpt

# Sulfur Dioxide (cont.) ## What are first aid measures for sulfur dioxide? (cont.) First Aid Comments: Some of the first aid procedures recommended here require advanced first aid training. All first aid procedures should be periodically reviewed by a medical professional familiar with the chemical and its conditions of use in the workplace. ## What are fire hazards and extinguishing media for sulfur dioxide? Flammable Properties: Does not burn. Suitable Extinguishing Media: Not combustible. Use extinguishing agent suitable for surrounding fire. Specific Hazards Arising from the Chemical: Heat from fire can cause a rapid build-up of pressure inside cylinders. Explosive rupture and a sudden release of large amounts of gas may result. Cylinder may rocket. Contact with some powdered metals may cause fires and explosions. ## What are the stability and reactivity hazards of sulfur dioxide? - Chemical Stability: Normally stable. - Conditions to Avoid: Water, moisture or humidity. - Incompatible Materials: Reacts violently with: halogens (e.g., chlorine), strong bases (e.g., sodium hydroxide). In the presence of water, corrosive to: aluminum alloys, carbon steel. - Hazardous Decomposition Products: On reaction with water: sulfurous acid solution. - Possibility of Hazardous Reactions: None known. ## What are unintentional release measures for sulfur dioxide? Personal Precautions: Use personal protective equipment as required. Increase ventilation to area or move leaking container to a well-ventilated and secure area. Methods for Containment and Clean-up: Stop or reduce leak if safe to do so. Knock down gas with fog or fine water spray. The resulting sulfuric acid solutions are very corrosive and very toxic. Dike and recover contaminated water for appropriate disposal. Other Information: Contact supplier, local fire and emergency services for help. What handling and storage practices should be used when working with sulfur dioxide? Sulfur Dioxide CCOH…

[4] Sulfur Dioxide

Page 6

Open source document

Source excerpt

# Sulfur Dioxide (cont.) ## What are unintentional release measures for sulfur dioxide? (cont.) Handling: In event of a spill or leak, immediately put on escape-type respirator and exit the area. Immediately report leaks, spills or failures of the safety equipment (e.g. ventilation system). Get medical attention for all exposures. Symptoms can be delayed. Secure cylinder in an up-right position. Protect cylinders from damage. Use a suitable hand truck to move cylinders; do not drag, roll, slide, or drop. Keep containers tightly closed when not in use or empty. Use corrosion-resistant tools and equipment. Storage: Store in an area that is: cool, dry, well-ventilated, temperature-controlled, separate from incompatible materials, out of direct sunlight and away from heat and ignition sources. Restrict access to authorized personnel only. Have escape-type respiratory protective equipment readily available, in case of leaks or spills. Always secure (e.g. chain) cylinders in an upright position to a wall, rack or other solid structure. Empty containers may contain hazardous residue. Store separately. Keep closed. ## What is the American Conference of Governmental Industrial Hygienists (ACGIH®) recommended exposure limit for sulfur dioxide? ACGIH® TLV® - STEL [C]: 0.25 ppm A4 Exposure Guideline Comments: TLV® = Threshold Limit Value. STEL = Short-term Exposure Limit. C = Ceiling limit. A4 = Not classifiable as a human carcinogen. Adapted from: 2022 TLVs® and BEls® - Threshold Limit Values for Chemical Substances and Physical Agents and Biological Exposure Indices. Cincinnati: American Conference of Governmental Industrial Hygienists (ACGIH) NOTE: In many (but not all) Canadian jurisdictions, the exposure limits are similar to the ACGIH® TLVs®. Since legislation varies by jurisdiction, contact your local jurisdiction for exact details. A list is available in the OSH Answers on Canadian Governmental Occupational Health & Safety Departments. A list of which acts and …

Related Q&A

Keep exploring.

Human questionGeneral

ATTENTION TO DETAIL

Toolbox Talk: Attention to Detail *Date:** [DATE] *Duration:** [DURATION] minutes *Presenter:** [PRESENTER NAME] *Location:** [LOCATION] Objective The objective of this toolbox talk is to emphasize the importance of attention to detail in all work tasks to prevent accidents, injuries, and damage to equipment.

Read the thread
Human questionGeneral

On-site fuel farm diesel and gasoline

Safety Procedures for On-Site Fuel Farms (Diesel and Gasoline) =============================================================== This document outlines the safety procedures for on-site fuel farms storing diesel and gasoline, covering fire prevention, spill control, and hazardous material handling. These procedures are

Read the thread
Human questionGeneral

Write me a safe work practice to use a vegetable slicer in an industrial kitchen

Safe Work Procedure for Vegetable Slicer Operation ================================================== Document Number: \[SWP-NUMBER] Revision Date: \[DATE] Next Review Date: \[NEXT REVIEW DATE] Department: \[DEPARTMENT NAME] 1\. Scope This safe work procedure outlines the guidelines for the safe operation of vegetable

Read the thread
Human questionGeneral

Create a JHA for using Jumpers in the elevator trade

Job Hazard Analysis: Elevator Technicians Using Jumpers ======================================================= *Assessment Date:** \[DATE] *Assessor:** \[ASSESSOR NAME] *Department/Area:** \[DEPARTMENT/AREA] *Review Date:** \[REVIEW DATE] 1\. Assessment Scope This risk assessment covers the activities of elevator

Read the thread
Human questionGeneral

Behavior

Toolbox Talk: Safe Chemical Handling: Understanding Chemical Behavior *Date:** [DATE] *Duration:** [DURATION] minutes *Presenter:** [PRESENTER NAME] *Location:** [LOCATION] Objective To educate workers on the importance of understanding chemical behavior, including reactivity, stability, and incompatibility, to prevent

Read the thread
Discussion thread

Add your experience.

Community answers can add practical context. They are moderated, but they are not SALUS-reviewed safety guidance.

New contributions are temporarily closed while the moderation queue is configured.

Community answers(0)

No community answers have been approved yet.

Comments on Rosie's answer(0)

No comments have been approved yet.

Ready to put operational safety to work?

Join 400K users across 150K sites already on SALUS.

Request a demo

No commitment · 30-minute personalized walkthrough