Asked by a personGeneral — US and Canadaen-CA

Write a risk assessment for aqua tower for kids

A person submitted this question to Rosie's free generator. The asker's identity is neither imported nor published.

Rosie's answer

Published by SALUS

A suitable risk assessment for an aqua tower play structure should identify the tasks, users, hazards, locations, likelihood, and severity of injury, then document controls and review them regularly. For this type of installation, key hazards include falls from elevated structures, slips and trips on wet or uneven surfaces, protrusions, pinch points, moving components, unauthorized access, missing or damaged materials, and water-related hazards. A practical assessment should break the play experience into zones and tasks such as access/egress, climbing, elevated platforms, slides, splash features, queue areas, and maintenance activities, then assign controls using engineering measures first, followed by work-practice and administrative controls, with PPE only as a last layer for workers. [10] [1] [5]

For child safety, the highest-priority hazards are drowning or submersion, falls from height, slips on wet surfaces, impact with hard edges or protrusions, entrapment/pinch points, and unsafe mixing of age groups.

Design the structure so standing water does not accumulate on platforms, stairs, or decks; provide drainage and textured, slip-resistant walking surfaces.
Provide barriers, controlled entry points, and clear sightlines so supervisors can continuously see all splash and elevated play zones.
Separate toddler/preschool features from older-child features by layout, water depth/intensity, access difficulty, and signage.
Eliminate or guard protrusions, sharp edges, and pinch points at gates, moving spray elements, and transition points.
Use impact-attenuating surfacing where dry-play fall zones exist and control access to elevated areas to reduce falls to lower levels.
Restrict climbing on exterior surfaces, railings, and non-play structural members through design and signage.
Control crowding with occupancy limits and one-way circulation where practical, especially at stairs, platforms, and slide entries.
Prevent unauthorized after-hours access with fencing, lockout of water features, and routine closing inspections.

[1] [1] [1] Water safety controls should be treated as critical life-safety measures. Where children can fall into or become submerged in water, use layered controls: shallow water design where feasible, rapid drainage, anti-entrapment compliant suction and recirculation systems, barriers to deeper water or service pits, continuous active supervision, emergency shutoff capability, rescue equipment, and a written response plan. For workers maintaining the attraction near water, assess whether personal flotation devices are needed and ensure any selected PPE is matched to the hazard. [2] [9] [11]

For supervision, use a formal zone-based supervision plan rather than relying on a single generic ratio. The exact ratio should be set by the operator's risk assessment, considering water depth, visibility, user age, crowd density, feature complexity, and whether the attraction includes any pooling water. As a conservative operational practice, maintain direct line-of-sight supervision at all times, require close hand-reach supervision by a parent or guardian for toddlers and weak swimmers, and increase trained attendant or lifeguard coverage during peak occupancy, mixed-age use, special events, or whenever any area cannot be fully seen by one supervisor. If there is any meaningful drowning exposure, trained aquatic supervision should be provided rather than general attendants alone.

Slip and fall prevention should focus on both same-level and elevated falls. Wet surfaces are a predictable hazard around aqua towers, so specify slip-resistant finishes, maintain effective drainage, remove algae and biofilm promptly, keep stairs and landings free of obstructions, require suitable footwear where appropriate, and close areas immediately when surfaces become excessively slippery or damaged. Elevated platforms, bridges, and access stairs should have compliant guards, handrails, and barriers, and any unguarded maintenance access above lower levels should be controlled. [1] [7] [13]

Drowning risk must be assessed even in shallow or interactive water because children can drown quickly, especially if they slip, are knocked down by water effects, become trapped, or are not continuously observed. Controls should include strict depth management, immediate removal of any child showing distress, prohibition of rough play and breath-holding games, rapid shutdown of water effects during an incident, rescue equipment positioned for immediate access, and staff trained in child rescue, CPR, and emergency communications. Children who are non-swimmers, very young, or have developmental or medical vulnerabilities should receive enhanced supervision and, where appropriate, additional flotation support approved for the setting. [2] [3] [6]

Age-appropriate use should be controlled by design, signage, and supervision. Establish clear user groups such as toddlers/preschool, school-age children, and older youth, and match each zone to developmental ability, stature, balance, and risk tolerance. Younger children should only use low-height, low-force, easy-egress features with constant caregiver supervision. Older children may use more challenging elevated elements only if guardrails, surfacing, and circulation controls are adequate. Do not allow small children to use features intended for larger users if they cannot maintain stable footing, reach handholds, or exit independently.

Inspection and maintenance procedures should include a documented pre-opening inspection, periodic operational checks during use, and scheduled preventive maintenance. Inspect for damaged or missing components, loose fasteners, protrusions, pinch points, degraded surfacing, slippery contamination, drainage problems, water quality or recirculation faults, signage condition, barriers and gates, and any new hazards introduced by repairs or changes. When hazards are found, isolate the area, correct the defect, document the action taken, and verify safe return to service. Regular inspections by personnel trained in hazard recognition are important, and reassessment is needed whenever equipment, materials, or processes change. [12] [12] [9]

The operator should maintain a written hazard assessment and certification record for the installation and for employee tasks such as operation, cleaning, chemical handling, and maintenance. The documentation should identify the workplace, assessor, date, hazards, and selected controls, and employees should be informed of the control measures and any PPE requirements. For staff, PPE may include slip-resistant footwear, gloves for maintenance or chemical tasks, eye protection for chemical splash hazards, hearing protection if noise levels warrant it, and personal flotation devices where there is a risk of falling into water. [8] [14] [9]

Emergency action plan covering missing child, submersion, traumatic injury, severe weather, electrical fault, chemical release, and evacuation.
Immediate stop/shutoff procedure for pumps and interactive features during rescue or entrapment events.
Staff trained and drilled in child rescue, CPR/AED, first aid, incident command, and emergency communications.
Rescue equipment and first-aid supplies positioned for rapid access and inspected routinely.
Clear method for summoning EMS and directing responders to the exact attraction location.
Post-incident reporting, scene preservation where required, and corrective-action review before reopening.

[1] [6] For compliance, the aqua tower should be operated under applicable local and national requirements for playground safety, aquatic venue safety, building and fire codes, public health/water quality rules, accessibility requirements, and general public safety duties. At minimum, the operator should be able to show a documented hazard assessment, selected controls based on the hierarchy of controls, employee training, PPE selection where needed, inspection records, maintenance records, and incident response procedures. For playground-specific technical compliance, use the jurisdictionally adopted standards and manufacturer instructions for guarding, entrapment, surfacing, structural integrity, and age labeling; for aquatic risks, also follow the local code requirements for water depth, circulation, disinfection, suction safety, staffing, and emergency equipment. [4] [8] [12]

If you want, I can also turn this into a site-specific aqua tower risk assessment checklist or a child supervision and inspection SOP.

14 source record(s)

Sources used for this answer

[1] Personal Protective Equipment (PPE) Guide

Page 7

Open source document

Source excerpt

# A. Introduction (cont.) ## Hierarchy of Controls (cont.) requirements under WAC [redacted identifier] Personal Protective Equipment (PPE). The next section tells you what you must do if your employees need PPE. Examples of some PPE: <table><tr><th>Body part</th><th>Example of PPE</th><th>Example of hazard/ hazardous condition</th></tr><tr><td>Head</td><td>hard hat</td><td>contact from falling object</td></tr><tr><td>Face</td><td>face shield</td><td>impact from flying wood chips</td></tr><tr><td>Eyes</td><td>safety glasses</td><td>liquid chemical splash</td></tr><tr><td>Body (torso)</td><td>leather apron</td><td>burn from molten metal work</td></tr><tr><td>Arms, hands</td><td>puncture-resistant metal- mesh gloves</td><td>cut from shellfish processing</td></tr><tr><td>Legs, feet</td><td>knee guards</td><td>awkward posture, pressure from carpet laying</td></tr><tr><td rowspan="2">Potentially life-threatening</td><td>life jacket (personal flotation device)</td><td>drowning from falling into water</td></tr><tr><td>*body harness/personal fall protection system</td><td>*fall from roof</td></tr><tr><td>Ears</td><td>*ear plugs</td><td>*loud noise from machinery</td></tr><tr><td>Lungs</td><td>*face mask with cartridge</td><td>*vapors from cleaning with solvent</td></tr></table> * PPE for these and other hazards are not included in this volume of the PPE Guide but will be covered in future volumes (see WAC 296-62 for respiratory and hearing protection and WAC 296-155 for fall protection for further assessment). 7

[2] Personal Protective Equipment (PPE) Guide

Page 20

Open source document

Source excerpt

# Option 1 BODY/WHOLE ¹ Work activities such as: [ ] building maintenance [ ] construction [ ] logging [ ] utility work [ ] other: <empty> Work-related exposure to: [ ] working from heights of 10 feet or more [ ] working near water [ ] other: <empty> Can hazard be eliminated without the use of PPE? Yes [ ] No [ ] If no, use: [ ] Fall Arrest/Restraint: Type: <empty> [ ] PFD: Type: <empty> [ ] Other: <empty> *(See Footnote 1) LUNGS/RESPIRATORY ¹ Work activities such as: [ ] cleaning [ ] pouring [ ] mixing [ ] sawing [ ] painting [ ] fiberglass installation [ ] compressed air or gas operations [ ] other: <empty> Work-related exposure to: [ ] irritating dust or particulate [ ] irritating or toxic gas/vapor [ ] other: <empty> Can hazard be eliminated without the use of PPE? Yes [ ] No [ ] *(See Footnote 1) EARS/HEARING ¹ Work activities such as: [ ] generator [ ] grinding [ ] ventilation fans [ ] machining [ ] motors [ ] routers [ ] sanding [ ] sawing [ ] pneumatic equipment [ ] punch or brake presses [ ] use of conveyors [ ] other: <empty> Work-related exposure to: [ ] loud noises [ ] loud work environment [ ] noisy machines/tools [ ] punch or brake presses [ ] other: <empty> Can hazard be eliminated without the use of PPE? Yes [ ] No [ ] *(See Footnote 1) (1) NOTE: There are other hazards requiring PPE (such as respiratory, noise, fall, etc. hazards), that are not included in this volume of the PPE Guide but will be covered in future volumes (see WAC 296-62 for respiratory and hearing protection and WAC 296-155 for fall protection for further assessment). However, you should consider all hazards when you conduct your hazard assessment. See a list of other WISHA rules (in "How to use this guide" p. 4) for information regarding PPE for specific work places. 20

[3] Personal Protective Equipment (PPE) Guide

Page 24

Open source document

Source excerpt

# Option 2 # Job Hazard Analysis for Personal Protective Equipment (PPE) Assessment Job/Task: Location: <table><tr><th>Job/Task Step</th><th>Hazard Type</th><th>Hazard Source</th><th>Body Parts At Risk</th><th>Severity</th><th>Probability</th><th>Risk Code</th><th>Control Method¹</th></tr><tr><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td></td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr></table> (1) Note: Engineering, work practice, and/or administrative hazard controls such as guarding must be used, if feasible, before requiring employees to use personal protective equipment. Certification of Assessment *Name of work place: <empty> *Address: <empty> *Assessment Conducted By: <empty> Title: <empty> *Date(s) of Assessment: <empty> Implementation of Controls Approved By: <empty> Title: <empty> Date: <empty> Page 24 24 24

[4] Personal Protective Equipment Hazard Assessment

Page 6

Open source document

Source excerpt

# What types of PPE may be necessary? Your hazard assessment should determine if your employees need any of the following types of PPE: - Eye and face protection ◆ Fall protection - Foot protection • Hand/general skin protection - Head protection • Hearing protection • Leg protection ● Personal floatation device • Respiratory protection • Torso/general body protection ## How to do a PPE hazard assessment ## Do a baseline survey to identify workplace hazards A baseline survey is a thorough evaluation of your entire workplace - including work processes, tasks, and equipment - that identifies safety and health hazards. A complete survey will tell you what the hazards are, where they are, and how severe a potential injury could be. ## Suggestions: Use safety data sheets (SDS) to identify chemical hazards. A safety data sheet has detailed information about a hazardous chemical's health effects, its physical and chemical characteristics, and safe handling practices. Review equipment owner and operator manuals to determine the manufacturer's safety warnings and recommended PPE. Conduct a job-hazard analysis (JHA) - a method of identifying, assessing, and controlling hazards associated with specific jobs. A JHA breaks down a job into tasks. You evaluate each task to determine if there is a safer way to do it. A job-hazard analysis works well for jobs with difficult-to-control hazards and jobs with histories of accidents or near misses. JHAS for complex jobs can take a considerable amount of time and expertise to develop. You may want to have a safety professional help you. Have an experienced safety professional survey your workplace with you. 4

[5] Hazard and Risk - Hazard Identification

Page 5

Open source document

Source excerpt

# Hazard and Risk - Hazard Identification (cont.) ## How do I know what is a hazard? (cont.) - Pinch points on machines (places where parts are very close together). - Objects that stick out (protrude) - Moving objects (conveyors, chains, belts, ropes, etc.) What could I fall from? (falls to lower levels) - Structures, tanks, silos. - Ladders, overhead walkways, elevating_platforms. - Roofs. - Trees or cliffs. - Trenches. What could I slip or trip on? (falls on the same level) - Obstructions on the floor and stairs. - Surface issues (wet, oily, icy, uneven). - Footwear that is in poor condition. How could I overexert myself? - Lifting (manual material handling). - Pulling or pushing. - Carrying. - Repetitive motions (work-related musculoskeletal disorders). - Awkward and static postures. What other situations could I come across? - Unknown or unauthorized people in the area. - A potentially violent situation. - Working alone. - Confined space. - Missing or damaged materials. - New equipment or procedures at the work site. - Fire or explosion. - Chemical spill or release. Hazard and Risk - Hazard Identification CCOHS

[6] Personal Protective Equipment (PPE) Guide

Page 8

Open source document

Source excerpt

# B. What you are required to do The Personal Protective Equipment (PPE) Rule WAC [redacted identifier] says you must • Do a Hazard Assessment for PPE and document it • Select and provide appropriate PPE to your employees (p.10) . Provide training to your employees and document it (p.11) • Make sure your employees use their PPE properly (p.12) • Make sure PPE is in safe and good condition (p.12) You can use the "Guidelines for complying with PPE requirements" checklist on p. 16 to help you with meeting the requirements of the PPE rules. ## 1. Do a Hazard Assessment for PPE and document it Before you can know if your employees need PPE, you must assess your work place for hazards. It will help you select the appropriate PPE for any hazards present or likely to be present. WISHA also requires you to document that you have done a hazard assessment. As the person responsible for conducting the hazard assessment, you are accountable both for the quality and thoroughness of the hazard assessment. 8

[7] Personal Protective Equipment Hazard Assessment

Page 4

Open source document

Source excerpt

# What is a PPE hazard assessment? A personal protective equipment (PPE) hazard assessment is an evaluation of your workplace that helps you determine what hazards your employees are exposed to and what PPE they need to protect themselves. A hazard assessment should include: - The jobs (or tasks) your employees do - The hazards your employees are exposed to • Where the hazards are located - The likelihood those hazards could injure your employees - The severity of a potential injury • The types of PPE necessary to protect your employees from those hazards ## Why should you do a PPE hazard assessment? There are three reasons: 1. A hazard assessment will help you find hazards at your workplace. 2. A hazard assessment will help you determine what personal protective equipment your employees need for protection. 3. Oregon OSHA's rules require you do one. 2

[8] Personal Protective Equipment (PPE) Guide

Page 3

Open source document

Source excerpt

# TABLE OF CONTENTS (If viewing this pdf document on the computer, you can place the cursor over the section headings below until a hand appears and then click. You can also use the Adobe Acrobat Navigation Pane to jump directly to the sections.) <table><tr><th></th><th>How To Use This Guide...</th><th>4</th></tr><tr><td>A.</td><td>Introduction</td><td>.6</td></tr><tr><td>B.</td><td>What you are required to do.</td><td>8</td></tr><tr><td></td><td>1. Do a Hazard Assessment for PPE and document it</td><td>8</td></tr><tr><td></td><td>2. Select and provide appropriate PPE to your employees..</td><td>10</td></tr><tr><td></td><td>3. Provide training to your employees and document it.</td><td>11</td></tr><tr><td></td><td>4. Make sure your employees use their PPE properly.</td><td>12</td></tr><tr><td></td><td>5. Make sure PPE is in safe and good condition</td><td>12</td></tr><tr><td>C.</td><td>Resources</td><td>.14</td></tr><tr><td></td><td>Tools/Forms: Checklists and forms you can use to help you</td><td></td></tr><tr><td></td><td>comply with PPE requirements.</td><td>15</td></tr><tr><td></td><td>Guidelines for complying with PPE requirements.</td><td>5672 16</td></tr><tr><td></td><td>Hazard Assessment For PPE.</td><td>17</td></tr><tr><td></td><td>Job Hazard Analysis Assessment for PPE.</td><td>21</td></tr><tr><td></td><td>- Additional Guidelines for Conducting a Job Hazard Analysis (JHA) Assessment for PPE...</td><td>.25</td></tr><tr><td></td><td>Personal Protective Equipment Training Certification Form</td><td></td></tr><tr><td></td><td>Personal Protective Equipment Training Quiz.</td><td></td></tr><tr><td></td><td>Sample PPE Policies</td><td></td></tr><tr><td></td><td>Recognizing and Controlling Hazards</td><td></td></tr><tr><td></td><td>What is a hazard?.</td><td>35</td></tr><tr><td></td><td>How do you control hazards?</td><td>38</td></tr><tr><td></td><td>Engineering Controls.</td><td>38</td></tr><tr><td></td><td>- Work Practice Controls</td><td>39</td></tr><tr><td><…

[9] Personal Protective Equipment (PPE) Hazard Assessment Tool

Page 6

Open source document

Source excerpt

# Hazard assessment worksheet: Head protection (cont.) ## Potential hazards (cont.) OSHA Oregon OSHA Department of Consumer and Business Services # Hazard assessment worksheet: Foot protection Salem Central Office [redacted street address]. NE Salem, OR [redacted postal code] Phone: [redacted phone] Toll-free: [redacted phone] osha.oregon.gov Work task: Date ## Potential hazards - No hazards requiring foot protection - Heavy objects such as barrels or tools that might roll onto or fall on a worker's feet - Sharp objects such as nails or spikes that could pierce the soles or uppers of ordinary shoes - Molten metal Hot, wet, or slippery surfaces Energized electrical equipment Other hazard: ## PPE required None required Steel toe shoes Boots or shoes metatarsal guards Slip resistant soles Puncture resistant soles Chemical resistant boots Insulated boots or shoes Other PPE: 440-5871 (07/23/COM)

[10] Personal Protective Equipment (PPE) Guide

Page 35

Open source document

Source excerpt

# SAMPLE PPE POLICIES # Introduction The purpose of the Personal Protective Equipment Policies is to protect the employees of (Name of your business) from exposure to work place hazards and the risk of injury through the use of personal protective equipment (PPE). PPE is not a substitute for more effective control methods and its use will be considered only when other means of protection against hazards are not adequate or feasible. It will be used in conjunction with other controls unless no other means of hazard control exist. Personal protective equipment will be provided, used, and maintained when it has been determined that its use is required to ensure the safety and health of our employees and that such use will lessen the likelihood of occupational injury and/or illness. This section addresses general PPE requirements, including eye and face, head, foot and leg, hand and arm, body (torso) protection, and protection from drowning. Separate programs exist for respiratory protection and hearing protection as the need for participation in these programs is established through industrial hygiene monitoring. (List other programs or policies requiring PPE, such as Hearing Protection, Respiratory Protection, Fall Protection, etc., that you may have at your work place) are also addressed in (State the section or location in your Accident Prevention Program where they are found) The (Name of your business) Personal Protective Equipment Policies includes: - Responsibilities of supervisors and employees • Hazard assessment and PPE selection - Employee training - Cleaning and Maintenance of PPE Sample Policies-2

[11] Personal Protective Equipment (PPE) Guide

Page 28

Open source document

Source excerpt

# Option 2 A high risk priority means that there is a reasonable to high probability that an employee will be killed or permanently disabled doing this task step and/or a high probability that the employee will suffer severe illness or injury! 4. Select PPE: Try to reduce employee exposure by first implementing effective controls that do not primarily rely on individual employee behavior (such as using PPE). Follow the "Hierarchy of Controls" (p. 38). a. For each hazard you identified, ask the question: "Can we change the way this job is done to eliminate or reduce this hazard?" Ideas might include combining steps, changing the sequence, a different tool, a change in the workstation, ventilation etc. The employees who do this job may have some good practical ideas. b. If none of these will work, what personal protective equipment (PPE) is needed? If PPE is needed, it must be appropriately matched to the hazard to provide effective protection against the hazard. c. Write down your solution in the Control Method column opposite the hazard. If you still aren't satisfied that the hazard is under control, you may need to consider not doing this job or doing it less often. 5. Certify the hazard assessment: Make sure you sign and fill in the required information (indicated by *) at the bottom of the form for proper documentation of the hazard assessment. The following pages show two examples of completed JHA hazard assessments for PPE. 28

[12] Personal Protective Equipment (PPE) Hazard Assessment Tool

Page 2

Open source document

Source excerpt

## PPE required at this workplace includes (check all that apply): (cont.) OSHA Oregon OSHA Department of Consumer and Business Services Hazard assessment worksheet: Fall protection Salem Central Office [redacted street address]. NE Salem, OR [redacted postal code] Phone: [redacted phone] Toll-free: [redacted phone] osha.oregon.gov Work task: Date ## Potential hazards No hazards requiring fall protection Unguarded surfaces more than 6 or 4 feet above a lower level or any height above dangerous equipment Other hazard: ## PPE required None required Personal fall arrest system Personal fall restraint system Other PPE: 440-5871 (07/23/COM)

[13] Personal Protective Equipment Hazard Assessment

Page 5

Open source document

Source excerpt

# What are Oregon OSHA's requirements for PPE hazard assessments? If you are a general industry, construction, or agricultural employer you must determine if your workplace has hazards you cannot eliminate or control without PPE. If there are such hazards, you must: • Select the PPE that protects your employees from the hazards • Communicate your selection decisions to each affected employee • Ensure the PPE fits each employee • Require your employees to use their PPE when they are exposed to the hazards General industry employers must also prepare a document that says they have done the hazard assessment. The document must include: • A heading that says the document is a "certification" of the hazard assessment • The name of the workplace evaluated • The name of the person certifying the hazard assessment was completed • The date of the hazard assessment ## Oregon OSHA's hazard assessment rules • General industry: [redacted phone](1), Hazard assessment and equipment selection. Appendix B to Subdivision 2/1 has guidelines for conducting a hazard assessment. • Construction: [redacted phone](1), Hazard assessment and equipment selection. Appendix B to Subdivision 2/1 has guidelines for conducting a hazard assessment. • Agriculture: [redacted phone](2), Hazard assessment and protective equipment selection. Appendix A to Subdivision 4/1 has a sample hazard assessment form. 3

[14] Personal Protective Equipment Hazard Assessment

Page 8

Open source document

Source excerpt

# Evaluate your employees' exposures to each hazard identified in the baseline survey (cont.) ## Document your hazard assessment For each job assessed, documentation must include the following information: - A heading saying the document is a "certification" of the hazard assessment • The name of the workplace evaluated - The name of the person certifying the hazard assessment was completed PPE hazard assessment certification Workplace evaluated: Person certifying the evaluation: Hazard assessment date: • The date of each hazard assessment Use the PPE hazard assessment and certification form on our website to conduct your own hazard assessment. Construction industry and agricultural employers do not have to document their hazard assessments, but must tell each exposed employee about their PPE selection decisions and meet other rule requirements. ## Do regular workplace inspections Regular inspections tell you whether you have eliminated or controlled existing hazards, and help you identify new hazards. Quarterly inspections by employees trained in hazard recognition are a good way to get the job done. Look for new hazards whenever you change equipment, materials, or work processes. Determine what hazards could result from the changes and how to control them. If your business works at multiple sites, you may need to do a hazard assessment at each site. 6

Publication receipt

Publisher: SALUS
Final reviewer: Francis Langlois
Original answer: May 16, 2026

Who, how, and why

Rosie, the contractors' AI Admin & Risk Assistant, works across the operational workflows to take care of the busy work, make capture in the field effortless, surface risk, and create business-ready outputs—without removing human judgment.

Rosie was grounded in a curated, human-created, SALUS-verified source library and retrieved relevant material for each question. SALUS published the English answer exactly as generated after duplicate screening. Francis Langlois reviewed the English content.

Rosie was offered as a free tool so people could ask real workplace-safety questions and receive immediate guidance. SALUS is preserving these human-requested answers because the same questions recur across jobsites and safety teams, and because the resulting threads can help people compare experience, clarify guidance and find relevant supporting material.

Topics

Chemical safety Safety compliance Electrical safety Emergency response Equipment safety Fall protection Hazard assessment Incident management Personal protective equipment Safety training

This information supports professional judgment; it does not replace applicable requirements, site-specific procedures, or advice from a qualified person.

Community answers can add practical context. They are moderated, but they are not SALUS-reviewed safety guidance.

New contributions are temporarily closed while the moderation queue is configured.

Community answers(0)

No community answers have been approved yet.

Comments on Rosie's answer(0)

No comments have been approved yet.

Rosie's answer

Sources used for this answer

Keep exploring.

Write a risk assessment for Work at a petroleum storage terminal. Sampling of liquid fuels from storage tanks and road tankers. The task…

formal hazard assessment

What type of toolbox should we have when we have two weeks left at project

Create a JHA for Controlling an Elevator Car in the Hoistway and Pit Access for the elevator trade

Write a risk assessment for Risk assessment for erecting steel carports

Create a pre-task plan for spraying fireproofing

Add your experience.

Community answers(0)

Comments on Rosie's answer(0)

Ready to put operational safety to work?