Write a toolbox talk on railway

Source excerpt

# Personal Protective Equipment (PPE) Checklist <table><tr><th>General PPE Requirements</th><th>Yes</th><th>No</th><th>Comments</th></tr><tr><td>1. Has a hazard assessment to identify and control physical and health hazards been completed? If not, perform a hazard assessment.</td><td></td><td></td><td></td></tr><tr><td>2. Have engineering and/or administrative controls been applied prior to the use of PPE? If not, apply them first if applicable and appropriate.</td><td></td><td></td><td></td></tr><tr><td>3. Has appropriate PPE that matches the hazard been identified and provided to employees for use?</td><td></td><td></td><td></td></tr><tr><td>4. Has the effectiveness of the PPE program been reviewed, updated and evaluated periodically?</td><td></td><td></td><td></td></tr><tr><td>5. Have employees been trained on the use and care of the PPE?</td><td></td><td></td><td></td></tr><tr><td>6. Have employees been trained on the limitations of the PPE?</td><td></td><td></td><td></td></tr><tr><td>7. Is the PPE training documented and kept on file?</td><td></td><td></td><td></td></tr><tr><td>8. Are supervisors enforcing the use of required PPE?</td><td></td><td></td><td></td></tr><tr><td>9. Is PPE inspected regularly and properly maintained?</td><td></td><td></td><td></td></tr><tr><td>10. Is worn and damaged PPE removed from service and replaced?</td><td></td><td></td><td></td></tr><tr><td>11. When the following type of PPE is necessary, is the employer providing and paying for the PPE as stated by the OSHA standard 1910.132? Metatarsal foot protection - Rubber boots with steel toes Non-specialty-toe footwear (i.e. steel toe shoes/boots) if the employer does not permit it to be worn off the job site Non-prescriptive eye protection Prescriptive eyewear inserts/lenses for full face respirators Goggles and face shields Firefighting PPE (i.e. helmet, boots, gloves, full gear, proximity suits, etc.) Hard hats Hearing protection Welding PPE</td><td></td><td></td><td></td></tr></t…

Source excerpt

# Head Protection (cont.) <table><tr><th>If exposed to this kind of hazard</th><th>Examples of work place situations</th><th>Use this type of PPE</th></tr><tr><td rowspan="5">falling objects or materials</td><td>working below other workers who are using tools and materials which could fall</td><td rowspan="7">Protective helmet (ANSI-approved Class A, B, or C)</td></tr><tr><td>working around or under conveyor belts which are carrying parts or materials</td></tr><tr><td>working below machinery or processes which might cause material or objects to fall</td></tr><tr><td>working around or under scaffolds or other overhead structures</td></tr><tr><td>working around objects suspended by overhead cranes</td></tr><tr><td rowspan="2">flying or propelled objects</td><td>working around or with machinery, tools, or processes which throw/shoot out particles</td></tr><tr><td>working in roadways while directing traffic</td></tr><tr><td rowspan="2">contact with overhead objects</td><td>working in areas where overhead heights change, or where one must walk/maneuver under low beams or other structures, or under vehicles, equipment</td><td rowspan="2">Protective helmet or Bump cap*</td></tr><tr><td>working in tight spaces</td></tr><tr><td>hair-catching hazard</td><td>working around machinery or in locations where hair can get caught into nip points, revolving shafts, or other moving parts</td><td>1,3 Hair net, hat, or cap that completely covers hair or controls all loose ends</td></tr><tr><td>hair fire hazard</td><td>✰working around machinery or in locations where an employee is exposed to an ignition source and may run into an area containing a combustible/flammable atmosphere if their hair is on fire</td><td>2.3 Hair covering of solid material</td></tr><tr><td>electrical hazards</td><td>working near exposed electrical conductors that could contact the head</td><td>Protective helmet designed to reduce electrical shock hazard (ANSI-approved Class A or B) Make sure headwear has no meta…

Source excerpt

# PINCH POINTS Date Posted: 09/02/2016 A Pinch Point is produced when 2 objects come together and there is a possibility that a person could be caught or injured when coming in contact with that area. Pinch points commonly impact fingers/hands, but can impact any area of the body. The injury resulting from a pinch point could be as minor as a blister or as severe as amputation or death. Conveyors, gears, loaders, compactors and other moving equipment are examples of machinery with pinch points. ## COMMON CAUSES OF INJURIES FROM PINCH POINTS • Not paying attention to the location of hands and feet • Walking or working in areas with mobile equipment and fixed structures • Loose clothing, hair or jewelry getting caught in rotating parts or equipment • Poor condition of equipment and guarding - Dropping or carelessly handling materials or suspended loads • Not using the proper work procedures or tools • Reaching into moving equipment and machinery ## SAFETY CONTROLS FOR PINCH POINTS • Verify all guarding is in place and effective • Wear the appropriate personal protective equipment. Gloves, hi-vis clothing and heavy boots. • Identify potential pinch points before starting work by conducting a pre task inspection. • Stay in employee designated areas: Always make sure mobile equipment operators know your location. • Lockout/Tagout: Always verify electrical equipment is de-energized before starting any maintenance work • Alertness: Drowsiness leads to inattentive work habits and shortcuts • Operating manuals and work procedures: Always review the operating instructions/manuals before starting work; pinch points may also be identified in these documents. • Ensure all mobile equipment has working backup alarms and lighting before use. ## QUESTIONS FOR DISCUSSION • What are the most common sources of pinch points in your work area? • What improvements can be made to machine guarding? ## PRESENTER TIPS • Pre-read the Toolbox Talk. Your comfort level a…

Source excerpt

# HEAVY EQUIPMENT (cont.) ## SPOTTERS Worker visibility and visual and verbal communication are essential to keeping workers safe around moving construction equipment. Blind spots can be a significant hazard for workers on the ground where the operator is unable to see them. A spotter, using effective means of communication or hand signals, can help communicate between the operator, workers on the ground, and any pedestrians entering the work zone. Spotters must wear high-visibility clothing, stand clear of equipment, and always be visible to the equipment operator. ## GENERAL SAFETY WHEN OPERATING OR WORKING AROUND HEAVY EQUIPMENT • Develop a work zone traffic control plan. Indicate travel routes through the site to eliminate (as much as possible) the need for backing equipment or vehicles. • When vehicles or heavy equipment must operate in reverse, ensure they are equipped with an audible backup alarm. • Inspect equipment before operation to ensure all lights and audible alarms work correctly. • Set up the equipment in the work zone so that construction equipment and workers have adequate space to perform the planned tasks. • Use 3-point mounting and dismounting technique off heavy equipment - NEVER JUMP OFF HEAVY EQUIPMENT. • - Establish a "danger zone," the working area where contact could result in personal injury or damage during operations. • Wear high-visibility clothing when working around heavy mobile equipment. • Use predefined and understood hand signals or two-way radios to control movement within the work zone. • Maintain a clear line of sight between the operator and workers. • Use a spotter when heavy equipment is in motion. This requires communication between the operator and workers to maintain safe movement. • Workers - should keep a safe distance from all sides of the heavy equipment while it is in use. • Be aware of the swing radius on specific equipment and, if possible, cordon off the area with barriers or caution tape. • A…

Source excerpt

MIOSHA Michigan Occupational Safety and Health Administration ## Special points of interest: • Wear Hard Hats, Safety Glasses, and Work Boots on job sites. • Use face shields and goggles when safety glasses are not enough • Wear safety toe foot- wear when feet can be crushed by heavy objects # Tool Box Talk Personal Protective Equipment MIOSHA Construction Safety Standard Part 6. Personal Protective Equipment Employer: Shall provide, at no expense to the employee, the initial issue of personal protective equipment (PPE) and replacement equipment necessary due to reasonable wear and tear required, unless specifically indicated otherwise or other employer/employee agreement specifically requires employees to provide such equipment. Employee: An employee shall wear PPE when prescribed by the MIOSHA rules. ## Head protection (Hard Hat): . Class A hard hat shall be used where a hazard from falling or flying objects or particles or from other harmful contacts or exposures may be present • physically altered, painted, or damaged hard hats shall not be worn • Wear hard hat brim forward • Do not ware baseball hats underneath ## Eye and face protection: - Z87.1 safety glasses shall be used where a hazard exists from flying objects or particles, harmful contacts, such as when using power tools, hammers, and working over head. • An employee who needs corrective lenses where eye protection is required shall be protected by 1 of the following: (a) Spectacles whose protective lenses provide optical correction. (b) Goggles that can be worn over the corrective lenses without disturbing the adjustment of the spectacles. - Use goggles when working around dust, chemicals - Use face shields to protect face from particles, chemicals Face shields do not protect eyes from flying object high impacts, must use Z87.1 safety glasses underneath ## Foot protection: • Employee Provided / Employer must require • ANSI Z41-1999 or ASTM 2412 & 2413 certified footwear mu…

Source excerpt

# HEARING PROTECTION 1900 Date Posted: 05/10/2024 According to the National Institute for Occupational Safety & Health (NIOSH), approximately 22 million workers yearly are exposed to hazardous work-related noise. As a result, occupational hearing loss is one of the most common work-related illnesses in the U.S. Noise is unwanted sound that can affect your job performance, interfere with communication, startle you, and disrupt your concentration leading to incidents. In addition, the psychological effects of noise include annoyance and disruption of attention. Ideally, engineering design or limiting the time a worker is exposed to noise will control hazardous noise exposure. However, this may only sometimes be feasible, especially in industrial facilities or construction sites. In situations where the ideal forms of control are not viable, Personal Protective Equipment (PPE) can be used to reduce noise levels at the ear. In addition, hearing protection can be provided as earplugs or earmuffs. ## HOW DO YOU CONTROL YOUR EXPOSURE TO HAZARDOUS NOISE AT WORK? The consequences of failing to protect your hearing may take years to show up. Prolonged exposure to noise exceeding 85 decibels (dB), about the same loudness as a vacuum cleaner, can cause permanent hearing loss by damaging the microscopic hair cells inside your ears. Methods to control the noise that can cause permanent hearing loss include: ## ENGINEERING CONTROLS Engineering Controls involve modifying or replacing equipment or making changes at the noise source or along the transmission path to reduce the noise level at the worker's ear. • Choosing low-noise tools • Maintaining and lubricating equipment • Providing barriers between the noise source and the worker or enclosing or isolating the noise source ## ADMINISTRATIVE CONTROLS Administrative Controls are changes in the workplace that reduce or eliminate worker exposure to noise; or operating noisy machines during shifts when fewer people are exp…

Source excerpt

# Select the appropriate protection: <table><tr><th>If work activities involve</th><th>Then use</th></tr><tr><td> carrying or handling materials which could be dropped - packages - objects - parts - heavy tools • other activities where objects might fall onto the feet</td><td>safety shoes/boots with impact protection - steel-toed safety shoes</td></tr><tr><td> skid trucks (manual material handling carts) working around bulk rolls (such as paper rolls) • working around heavy pipes (could potentially roll over employees' feet</td><td>safety shoes/boots with compression protection -steel-toed safety shoes</td></tr><tr><td>• working in areas where sharp objects could be stepped on - nails, tacks, screws - wire - large staples - scrap metal parts</td><td>safety shoes/boots with puncture protection - puncture-resistant soles</td></tr><tr><td>• working on tops of logs</td><td>caulk or other non-slip footwear</td></tr><tr><td> (in construction) working around materials which could - burn, scald - cut - penetrate/puncture</td><td>safety shoes/boots with leather or equivalent firm material (Note: leather provides poor absorption protection.)</td></tr><tr><td>• exposure to hot substances or dangerous chemical spills</td><td>leggings or high boots of leather, rubber, or other suitable material</td></tr></table> ## Some Types of protective foot/leg equipment: <table><tr><th>Type</th><th>Hazard Protection</th><th>Description</th></tr><tr><td>Steel-reinforced Safety Shoes</td><td>protect feet from common machinery hazards: falling objects rolling objects • cuts • punctures</td><td>entire toe box and insole reinforced with steel instep protected by steel, aluminum, or plastic may be designed to insulate against temperature extremes may be equipped with special soles to guard against slip, chemicals, heat, and/or electrical hazards.</td></tr><tr><td>Safety Boots</td><td>more protection from splash or spark hazards or electrical hazards than shoes: chemicals - corrosives, caus…

Source excerpt

# THE FATAL FOUR IN CONSTRUCTION - STRUCK BY ## Date Posted: 12/12/2023 According to the National Institute for Occupational Safety & Health (NIOSH), struck-by incidents occur when a moving object strikes a worker. These struck-by incidents are a leading cause of death among construction workers. The four most common struck-by hazards are struck by a flying, falling, swinging, or rolling object, both large and small, from vehicles and heavy machinery to rocks, gravel, and tools. Construction workers have two times the risk of struck-by injuries than all other industries. ## CATEGORIES AND EXAMPLES OF STRUCK BY HAZARDS? A struck-by hazard is anything at your worksite that could produce injuries by forcible contact or impact between the injured person and an object or equipment. Struck-by fall into four categories: risks ## FLYING OBJECT According to OSHA, "a flying object hazard exists when something has been thrown, hurled, or is being propelled across space." It can include instances when a piece of separates from a tool, machine, or other equipment, striking a worker and resulting in injuries or fatalities. Examples of struck-by-flying object hazards: material • A piece of material separates from a tool, machine, or other equipment and strikes a worker. • An object is ejected under power by a tool or equipment usually designed for that purpose, such as a nail from a nail gun. • Compressed air used to power tools or clean surfaces causes flying object hazards. ## FALLING OBJECT Struck-by-falling object hazards involve objects falling from an elevation to a lower level. Injuries from these hazards include instances where the injured person is crushed, pinned, or caught under a falling object. Examples of struck-by-falling object hazards: - A worker is struck by a load, or parts of a load, that falls from a vehicle or other equipment. • A crane boom, or another piece of equipment, breaks, collapses, and strikes a worker. • A section from a structur…

Source excerpt

CPWR TOOLBOX THE CENTER FOR CONSTRUCTION RESEARCH AND TRAINING TALK # Head Protection The hard hat is one of the most widely used and important pieces of personal protective equipment (PPE) on the job. Hard hats protect workers from head injuries due to falling objects and overhead hazards. ## Bob's Story Bob and his crew were putting a new roof on a house. During his lunch break, Bob was on the ground eating a sandwich. A worker on the roof dropped his hammer. The falling hammer struck Bob's hard hat. Although Bob had some pain and discomfort, he did not need hospitalization. - Have you or someone you know ever had their hard hat prevent an injury? If so, what happened? - How could this incident have been prevented? ## Remember This ➤ On a jobsite, always wear a hard hat that fits properly. ➤ Always wear your hard hat with the bill facing forward. Certification by ANSI does not cover hard hats worn backwards. ➤ Always avoid contact between the hard hat and electric wires. ➤ Always keep the space between the shell and the head clear. For example, don't wear a ball cap or other object under your hard hat. Never alter its shell or suspension, because that could drastically reduce the protection it gives. ➤ Never use a cushion-support suspension that is intended for use with a different hard hat shell or that is made by a different manufacturer. ➤ If you wear eye protection, use a kind designed to work with hard hats. Be sure to follow the maker's instructions for use. How can we stay safe today? What will we do at the worksite to promote hard hat use and prevent head injuries? - 1. - 2. OSHA Regulation: 1926.100 ©2017, CPWR-The Center for Construction Research and Training. All rights reserved. CPWR is the research and training arm of NABTU. Production of this document was supported by cooperative agreement OH 009762 from the National Institute for Occupational Safety and Health (NIOSH). The contents are solely the responsibility of the authors an…

Source excerpt

# MOBILE EQUIPMENT LLYNCH Date Posted: 09/05/2016 There are many types of mobile equipment, their use depends on the processes involved with the industry. Examples of mobile equipment include: • Forklifts, towing equipment, cranes • Maintenance buggies & electric carts • Automated storage & retrieval systems, order pickers, aerial lifts and scissor lifts • Machines & hauling equipment (loaders, haul trucks, utility trucks, excavators.) ## OPERATOR SAFETY • Do not exceed posted speed limits; if not posted, then ask management • Do not make sharp turns or swings; always understand the center of gravity of the machine; do not exceed rated loads • Honk at intersections before proceeding; always make sure there is a clear line of sight • Wear seat belts and Personal Protective Equipment, as required • Understand company policy on right-of-way ## MACHINE SAFETY • Machine - safety is the management of safety risks that can occur when operating a machine. • Inspect the function of the doors / hinges, hydraulic hoses, nuts / bolts, condition of tires and other areas. • Verify lights, gauges, horns and other similar equipment are in working order; verify fluids are at required levels. • Ensure there are no obstructions or debris in the equipment before starting and the vehicle is free from leaks of any type. • Make - sure the operating manual has been reviewed before operating any equipment ## WORK ENVIRONMENT SAFETY • - It is a good practice to have an understanding of the work environment before entering. • Inspect the condition of the ground for holes, obstructions, dips and uneven surfaces. • Inspect the condition of walls, racks, vertical and overhead storage • Verify the area is well lit or can be illuminated with vehicle or machine lighting • Always identify pedestrians and other vehicles and verify they see you ## QUESTIONS FOR DISCUSSION • What types of task training are provided for Mobile Equipment? What daily checks are con…

Source excerpt

Construction Prevent Falls: Guardrails Toolbox Talk NIOSH CPWR [● Falls are a leading cause of construction injuries and fatalities. Workers can fall from ladders, scaffolds, vehicles, heavy equipment, aerial lifts, platforms, and roofs, and through holes or openings in floors or roofs. Guardrails can prevent a fall. ## Bill's Story Bill was repairing an air conditioning unit on the roof of a three-story building. He was about a foot from an unguarded edge. When he stood up, he lost his balance. Bill fell 23 feet to the cement floor below and died. *What caused this incident? - How could this have been prevented? * Have you ever fallen because of a missing guardrail, or do you know someone who has? If so, what happened? ## How can we stay safe today? What will we do at the worksite to prevent fall injuries? ## Remember This • Your employer must provide every employee with training on how to recognize a fall hazard and on fall protection. • Guardrails, safety nets, and/or personal fall-arrest systems must be in place if there is a risk for falls. • Guardrails are required on work surfaces where workers are at risk of falls greater than 6 feet. - Guardrails must be 42 inches high (+/- 3") and have a mid-rail. • Body harnesses with lanyards and secure attachment points provided by employers must be used if guardrails cannot be provided. OSHA Standards: 1926.501 and 1926.503 CD C National and Health NIOSH® CENTERS FOR DISEASE CONTROL AND PREVENTION CPWR 【O THE CENTER FOR CONSTRUCTION RESEARCH AND TRAINING

Source excerpt

# PERSONAL PROTECTIVE EQUIPMENT Date Posted: 09/03/2016 Personal Protective Equipment (PPE) is gear that can be worn to help minimize or eliminate injury. It can be worn to help prevent sudden injuries or injuries occur over time. It is very important the user understands the intended purpose of the PPE and verifies that it fits properly. that ## When to Wear PPE • Before you resort to PPE, you should first: • Use administrative controls • Implement Engineering Controls • Use local exhaust or general ventilation vs. a respirator • Control dust with a wet process vs. dry • Install sound reducing devices to mechanical equipment • When these other two means of protection are exhausted you then will need to select the appropriate PPE. - Often times PPE will be used in conjunction with administrative and engineering controls for added protection. ## BASIC TYPES OF PPE Head: Hard hat, welders cap Hearing: Earmuffs, ear plugs or canal caps Face/Eye: Safety glasses, face shield, safety goggles. Hand: Gloves for general use, chemical use, electrical work or hot work. Body: Chaps, leathers, coveralls Foot Protection: Leather boots, Safety toe/steel toe boots Personal Protective Equipment is gear that is worn to help minimize or eliminate injury. It is very important the user understands the intended purpose of the PPE, verifies that the PPE fits properly and is adequate for the work to be performed. Remember: PPE is the last line of defense against a hazard. LEARN MORE ## QUESTIONS FOR DISCUSSION • Does the PPE you wear to perform your work fit properly and is it in good working condition? What can be done in your work area to improve the use of PPE? • What improvements can be made to reduce the need for PPE? ## PRESENTER TIPS • Pre-read the Toolbox Talk. Your comfort level and confidence will be higher if you know your topic. Discuss related tasks, work areas or events that make the Toolbox Talk relevant to your job site. • Involve the workers …

Source excerpt

# ARC FLASH HAZARDS (cont.) ## HOW CAN YOU PROTECT YOURSELF FROM THE HAZARDS OF ARC FLASH? (cont.) • De-energizing would create a more significant hazard, or it is necessary for the interests of health and safety that the electrical work is carried out while the equipment is energized (e.g., it may be required for life-saving equipment to remain energized and operating while electrical work is carried out on the equipment). • It is necessary that the electrical equipment to be worked on is energized for the work to be carried out correctly. • It is necessary for testing or troubleshooting. • There is no reasonable alternative means of carrying out the work. ## NOTE: USE APPROPRIATE LOCKOUT, TAGOUT, AND HAZARDOUS ENERGY CONTROL PROCEDURES TO ISOLATE ENERGIZED EQUIPMENT WHEN A CIRCUIT BREAKER OR OTHER DISCONNECT TURNED OFF. THE BEST ARC FLASH PROTECTION IS TO DE-ENERGIZE EQUIPMENT BEFORE WORKING ON IT! IS Second Best Choice for Arc Flash Protection: Use appropriately rated personal protective equipment (PPE). Arc flash personal protective equipment (PPE) is a combination of clothing and safety equipment worn for protection from arc flash and shock hazards by a person performing electrical work. Primarily, arc flash PPE is divided into the following subgroups: • Head, face, neck, and chin protection • Eye protection • Hearing protection • Body protection • Hand and arm protection • Foot and leg protection ## GENERAL ELECTRICAL SAFE WORK PRACTICES All employees working on or near electrical equipment shall follow general safe work practices, including: • Maintain housekeeping procedures in the work area, e.g., prevent slip trips and falls; eliminate fire hazards; control dust; prevent falling hazards; clear clutter. • Plan and analyze each step of a work task to ensure safety. • - Maintain appropriate work boundaries for qualified electrical workers (QEW) and unqualified workers. • Use properly rated and tested test equipment (e.g., multimeter). …