How close to a bedroom should a carbon dioxide detector be in New York State

Carbon Dioxide Detector Placement in New York State Residential Buildings =========================================================================

This document outlines the New York State regulations concerning the placement of carbon monoxide (CO) detectors in residential buildings, particularly focusing on proximity to bedrooms, to ensure effective detection and prevent carbon monoxide poisoning. These regulations are crucial for life safety in residential environments.

General Requirements for Carbon Monoxide Alarms

---

New York State mandates the installation and maintenance of approved carbon monoxide alarms in specific locations within dwelling units to protect residents from the dangers of CO poisoning. These requirements are particularly stringent in foster homes, ensuring the safety of vulnerable populations.

Placement Requirements

Carbon monoxide alarms must be installed in the following locations:

• Outside of each separate sleeping area in the immediate vicinity of the bedrooms. This placement ensures that occupants are alerted even while sleeping.
• In each room used for sleeping purposes. This provides direct detection within sleeping areas.
• In each habitable story within a dwelling. This ensures coverage throughout the residence.

Power Source Requirements

To ensure reliability, smoke alarms must be powered by one of the following methods:

• The electrical system of the dwelling as the primary power source and a battery as a secondary power source.
• A battery rated for a 10-year life, provided the smoke alarm is listed for use with a 10-year battery.
• Battery power that is part of a listed wireless interconnected smoke alarm unit.

Additional Requirements for Foster Homes

---

Foster homes have specific requirements to ensure the safety of foster children. These include:

• Compliance with dwelling design and construction statutes and regulations.
• Maintenance of means of egress as required by original construction.
• Selection, use, and installation of heating devices per manufacturer's recommendations and approved testing laboratory listing conditions.
• Operational oxygen depletion devices and safety shutoff devices on unvented gas heaters, located or guarded to prevent burn injuries.
• Fireplaces equipped with fire screens, partitions, or other means to protect clients from burns.
• Development and posting of a fire escape plan describing actions to be taken in the event of a fire.
• Conducting fire escape drills every three months and recording the details for three years.
• Conducting a fire escape drill within 24 hours of the arrival of each new foster child.
• Prohibition of portable unvented fuel-fired heating equipment.
• Maintenance of sleeping room doors that close and latch to provide compartmentation in case of a fire event.
• Ensuring the dwelling is free of fire hazards such as faulty electrical cords, overloaded sockets, or accumulation of flammable materials.
• Placement of approved address numbers that are plainly legible and visible from the street.

Interconnection and Sprinkler Systems

To enhance safety, foster homes must have either interconnected smoke alarms or a residential fire sprinkler system:

• Listed smoke alarms must be interconnected so that the activation of one alarm activates all alarms in the dwelling unit. Wireless alarms are acceptable if they all sound upon activation of one alarm.
• Alternatively, a residential fire sprinkler system can be installed in accordance with applicable statutes, regulations, and adopted codes.

Enforcement and Revocation of Approval

---

The Office of the State Fire Marshal (OSFM) has the authority to revoke approvals if there are false statements or misrepresentations in the application or construction documents. Reasons for revocation include:

• Using the permit or approval for a different location or establishment.
• Using the permit or approval for a condition or activity not listed in the permit.
• Violating conditions and limitations set forth in the permit or approval.
• Making false statements or misrepresentations in the application or submitted plans.
• Using the permit or approval by a different person or firm.
• Failing, refusing, or neglecting to comply with orders or notices.
• Issuing the permit or approval in error or in violation of a statute, regulation, code, or standard.

Summary

---

Adherence to these regulations is essential for ensuring the safety of residential buildings in New York State, particularly concerning carbon monoxide detection and fire safety. Regular inspections and maintenance are critical to upholding these standards and preventing potential hazards.

Approved carbon monoxide alarms must be installed and maintained outside of each separate sleeping area in the immediate vicinity of the bedroom in dwelling units within which fuel fired appliances are installed and in dwelling units that have attached garages. [1]

Listed smoke alarms shall be installed in accordance with the manufacturer's installation instructions and in the following locations: [1]

On the ceiling or wall outside of each separate sleeping area in the immediate vicinity of bedrooms; and in each room used for sleeping purposes; and in each habitable story within a dwelling. [2]

Listed smoke alarms shall be powered from the electrical system of the dwelling as the primary power source and a battery as a secondary power source; a battery rated for a 10-year life, provided the smoke alarm is listed for use with a 10-year battery; or battery power that is part of a listed wireless interconnected smoke alarm unit. [2]

Facilities serving as a foster home shall have approved address numbers placed in a position that is plainly legible and visible from the street. Address number shall be a minimum of 4 inches high with a minimum stroke width of 0\.5 inch and shall contrast with their background. [1]

All sleeping rooms below the fourth story shall have emergency escape and rescue openings that open from the inside. [2]

Listed smoke alarms required to be installed shall be interconnected in such a manner that the activation of one alarm will activate all of the alarms in the dwelling unit. Physical interconnection of smoke alarms shall not be required where listed wireless alarms are installed and all alarms sound upon activation of one alarm; or a residential fire sprinkler system in accordance with the applicable statutes, regulations, and adopted codes. [2]

Safety powered by SALUS