Write a risk assessment for Generate Hazard identification and risk assessment of container picker loading and unloading activity on a stand

Source excerpt

## Why use PPE? (cont.) PERSONAL PROTECTIVE EQUIPMENT # Employer responsibility Survey your workplace Conduct a hazard assessment to determine if employees need PPE. OAR [redacted phone](1) requires a written document that certifies that the workplace has been evaluated, the dates of the hazard assessment, ## Table 1 and who performed the evaluation. Hazard assessments should be re-evaluated whenever there are changes to equipment, processes, or chemicals in the workplace. See an example of a hazard assessment in Table 1, below. Another example is our PPE Hazard Assessment and Certification Form. <table><tr><th colspan="4">PPE Hazard Assessment (example)</th></tr><tr><td colspan="2">Department: Building maintenance</td><td colspan="2">Job title: Maintenance specialist</td></tr><tr><td colspan="4">Job duty location: Plant-wide</td></tr><tr><td colspan="4">Analysis performed by: Jada Robinson Date: Dec. 19, 2023</td></tr><tr><td>Activity/tools</td><td>Potential hazards</td><td>Body parts</td><td>PPE required</td></tr><tr><td>Replace glass</td><td>1,7</td><td>c, g, h</td><td>III, VII (cut resistant)</td></tr><tr><td>Remove trash</td><td>7</td><td>C</td><td>III</td></tr><tr><td>Replace light bulbs</td><td>1, 4, 7</td><td>c, h</td><td>III, VII (cloth/leather)</td></tr><tr><td>Welding</td><td>3,7,8</td><td>c, e, f, g, h</td><td>X (welding helmet/lens) IX (fume) X (welding vest) VII (welding gloves)</td></tr></table> ## Hazard key 1. Cut 2. Abrasion 3. Burn 4. Fall 5. Flying object 6. Noise 7. Flying particles 8. Inhalation 9. Slip 10. Splash 11. Other Body part key a. Head b. Face c. Eye(s) d. Ear(s) e. Respiratory f. Trunk g. Arm(s) h. Hand(s) i. Finger(s) j. Leg(s) k. Foot/feet I. Toe(s) m. Other PPE required key I. Hard hat - II. Chemical goggles - III. Safety glasses - IV. Ear plugs V. Ear muffs - VI. Body harness - VII. Gloves (list type) - VIII. Shoes/boots (list type) - IX. Respirator X. Other OSHA Oregon OSHA Departm…

Source excerpt

# Option 2 ## Job Hazard Analysis Assessment for PPE: Instructions 1. - Conduct a walk through survey of your business. For each job/task step, note the presence of any of the following hazard types (see table below) their sources, and the body parts at risk. Fill out the left side of the hazard assessment form (for help, see samples on p.29-30). Gather all the information you can. • Look at all steps of a job and ask the employee if there are any variations in the job that are infrequently done and that might have missed during your observation. you • - For purposes of the assessment, assume that no PPE is being worn by the affected employees even though they may actually be wearing what they need to do the job safely. - Note all observed hazards. This list does not cover all possible hazards that employees may face or for which personal protective equipment may be required. Noisy environments or those which may require respirators must be evaluated with appropriate test equipment to quantify the exposure level when overexposure is suspected. <table><tr><th>Hazard Type</th><th>General Description of Hazard Type</th></tr><tr><td>Impact</td><td>Person can strike an object or be struck by a moving or flying or falling object.</td></tr><tr><td>Penetration</td><td>Person can strike, be struck by, or fall upon an object or tool that would break the skin.</td></tr><tr><td>Crush or pinch</td><td>An object(s) or machine may crush or pinch a body or body part.</td></tr><tr><td>Harmful Dust</td><td>Presence of dust that may cause irritation, or breathing or vision difficulty. May also have ignition potential.</td></tr><tr><td>Chemical</td><td>Exposure from spills, splashing, or other contact with chemical substances or harmful dusts that could cause illness, irritation, burns, asphyxiation, breathing or vision difficulty, or other toxic health effects. May also have ignition potential.</td></tr><tr><td>Heat</td><td>Exposure to radiant heat sources, splashes or spills…

Source excerpt

# What is a hazard? A hazard is an existing (or potential) hazardous or unsafe condition or work practice that, by itself or in combination with other conditions, could cause injury, illness, or death to workers, as well as cause property damage. Hazards may exist from • Processes, procedures • Unsafe equipment, machinery, or tools • Unsafe work practices - Any series of actions or operations (manufacturing, equipment, product flow, etc., and handling) that convert raw material into a product - For example damaged tools, unguarded blades or unguarded moving parts, etc. - Allowing untrained workers to perform hazardous tasks, taking unsafe shortcuts, being distracted, working long shifts, etc. The table below describes some common types of hazards. It does not cover all the possible hazards that employees may face or for which personal protective equipment may be required. Some hazards, such as noisy environments or those that may require respirators, must be evaluated with appropriate test equipment to quantify the exposure level when overexposure is suspected. (Hearing and respiratory protection will be covered in future volumes.) <table><tr><th>Hazard Type</th><th>General Description</th><th>Examples</th></tr><tr><td>Impact</td><td>Person can strike an object or be struck by a moving or flying or falling object.</td><td>• movement of machine parts · chips thrown from machines falls from elevation or on the same level</td></tr><tr><td>Penetration</td><td>Person can strike, be struck by, or fall upon an object or tool that would break the skin.</td><td>. sharp edges or protrusions on tools, machines, or in aisles</td></tr><tr><td>Crush or pinch</td><td>An object(s) or machine may crush or pinch a body or body part.</td><td>a falling, rolling, or dropped object that causes crushing injury to hands or feet • press</td></tr><tr><td>Harmful Dust</td><td>Presence of dust that may cause irritation, or breathing or vision difficulty. May also have ignition pot…

Source excerpt

# Personal Protective Equipment (PPE) Checklist <table><tr><th>General PPE Requirements</th><th>Yes</th><th>No</th><th>Comments</th></tr><tr><td>1. Has a hazard assessment to identify and control physical and health hazards been completed? If not, perform a hazard assessment.</td><td></td><td></td><td></td></tr><tr><td>2. Have engineering and/or administrative controls been applied prior to the use of PPE? If not, apply them first if applicable and appropriate.</td><td></td><td></td><td></td></tr><tr><td>3. Has appropriate PPE that matches the hazard been identified and provided to employees for use?</td><td></td><td></td><td></td></tr><tr><td>4. Has the effectiveness of the PPE program been reviewed, updated and evaluated periodically?</td><td></td><td></td><td></td></tr><tr><td>5. Have employees been trained on the use and care of the PPE?</td><td></td><td></td><td></td></tr><tr><td>6. Have employees been trained on the limitations of the PPE?</td><td></td><td></td><td></td></tr><tr><td>7. Is the PPE training documented and kept on file?</td><td></td><td></td><td></td></tr><tr><td>8. Are supervisors enforcing the use of required PPE?</td><td></td><td></td><td></td></tr><tr><td>9. Is PPE inspected regularly and properly maintained?</td><td></td><td></td><td></td></tr><tr><td>10. Is worn and damaged PPE removed from service and replaced?</td><td></td><td></td><td></td></tr><tr><td>11. When the following type of PPE is necessary, is the employer providing and paying for the PPE as stated by the OSHA standard 1910.132? Metatarsal foot protection - Rubber boots with steel toes Non-specialty-toe footwear (i.e. steel toe shoes/boots) if the employer does not permit it to be worn off the job site Non-prescriptive eye protection Prescriptive eyewear inserts/lenses for full face respirators Goggles and face shields Firefighting PPE (i.e. helmet, boots, gloves, full gear, proximity suits, etc.) Hard hats Hearing protection Welding PPE</td><td></td><td></td><td></td></tr></t…

Source excerpt

# What types of PPE may be necessary? Your hazard assessment should determine if your employees need any of the following types of PPE: - Eye and face protection ◆ Fall protection - Foot protection • Hand/general skin protection - Head protection • Hearing protection • Leg protection ● Personal floatation device • Respiratory protection • Torso/general body protection ## How to do a PPE hazard assessment ## Do a baseline survey to identify workplace hazards A baseline survey is a thorough evaluation of your entire workplace - including work processes, tasks, and equipment - that identifies safety and health hazards. A complete survey will tell you what the hazards are, where they are, and how severe a potential injury could be. ## Suggestions: Use safety data sheets (SDS) to identify chemical hazards. A safety data sheet has detailed information about a hazardous chemical's health effects, its physical and chemical characteristics, and safe handling practices. Review equipment owner and operator manuals to determine the manufacturer's safety warnings and recommended PPE. Conduct a job-hazard analysis (JHA) - a method of identifying, assessing, and controlling hazards associated with specific jobs. A JHA breaks down a job into tasks. You evaluate each task to determine if there is a safer way to do it. A job-hazard analysis works well for jobs with difficult-to-control hazards and jobs with histories of accidents or near misses. JHAS for complex jobs can take a considerable amount of time and expertise to develop. You may want to have a safety professional help you. Have an experienced safety professional survey your workplace with you. 4

Source excerpt

# Certification of Hazard Assessment (Sample Page) Work Area Assessment Conducted By. Date Personal Protective Equipment - Hazard Analysis - By Task <table><tr><th>Task</th><th>Hazard</th><th>PPE Required</th><th>Notes</th><th>Department</th></tr><tr><td>Entering high noise area</td><td>Hearing loss</td><td>Foam, cap, or earmuff type hearing protection</td><td>Both ears, all production areas, prior to exposure area</td><td>All persons</td></tr><tr><td>Chemical mixing</td><td>Caustic burns</td><td>Chemical gloves, apron, goggles and face shield, rubber boots, sleeves</td><td>Only authorized employees are to mix chemicals. Read MSDS prior to using any chemicals.</td><td>Authorized Employees</td></tr><tr><td>First aid/CPR</td><td>Bloodborne pathogens/Air borne diseases</td><td>Latex/non-latex examination gloves, safety eyewear, CPR device protective mask</td><td>Immediate notification if exposed to body fluids. See Bloodborne Pathogen Control Program</td><td>Any staff required to render first aid.</td></tr><tr><td>Grinding, sanding, chipping, abrading</td><td>Debris in eyes, burns, lacerations to face and other non-protected body parts.</td><td>Safety glasses / goggles, face shield, gloves, arm protection, Safety toed leather boots</td><td>Use point of operation area guarding when available.</td><td>Maintenance</td></tr><tr><td>Grinding, sanding, chipping, abrading</td><td>Hand lacerations, impingement</td><td>Leather or thick cloth work gloves</td><td>When using powered tools</td><td>Maintenance</td></tr><tr><td>Welding, brazing</td><td>Eye hazard, burns</td><td>Welding helmet, apron, gloves, chaps</td><td>See selection chart for proper lens shade</td><td>Maintenance</td></tr><tr><td>Work on live electrical circuits</td><td>Electrical shock</td><td>Reference NFPA 70-E</td><td>Maintenance</td><td>Must be licensed and trained.</td></tr><tr><td>Exposure to traffic</td><td>Body injuries</td><td>ANSI Class II Safety Vest</td><td>Wear near road ways or high traffic are…

Source excerpt

## PPE required (cont.) OSHA Oregon OSHA Department of Consumer and Business Services # Hazard assessment worksheet: Torso protection Salem Central Office [redacted street address]. NE Salem, OR [redacted postal code] Phone: [redacted phone] Toll-free: [redacted phone] osha.oregon.gov Work task: Date ## Potential hazards - No hazards requiring torso protection - Extreme temperatures Hot splashes from molten metal and other hot liquids - Impacts from tools, machinery, and materials Hazardous chemicals lonizing radiation Other hazard: ## PPE required None required Chemical resistant coveralls Cut-resistant sleeves, wristlets Flame-resistant jacket Flame-resistant pants High visibility garment Insulated jacket, hood Lab coat or apron Static control coats or coveralls Other PPE: 440-5871 (07/23/COM)

Source excerpt

# What is a sample risk assessment form? (cont.) ## Sample Risk Assessment Form (cont.) <table><tr><th>Step or task</th><th>Hazard</th><th>Consequences or harm</th><th>Risk</th><th>Priority</th><th>Hazard Controls</th></tr><tr><td>EXAMPLE: Working at heights while on a ladder</td><td>Safety hazard: falling from heights</td><td>Serious injury due to a fall</td><td>High risk</td><td>1</td><td>Follow the hierarchy of controls for working at heights Elimination: when possible, perform work from the ground. Engineering controls: use an elevating work platform when appropriate. Administrative controls:</td></tr><tr><td></td><td></td><td></td><td></td><td></td><td>development of fall protection plans, safe work procedures, emergency response plans for working at heights, and adequate training (including working heights and fall protection training, elevating work platform training, ladder safety, training on safe work procedures and emergency response, etc.). Personal protective equipment: fall arrest system and equipment, head protection, high-visibility. clothing, protective footwear, face and eye protection, emergency response equipment, and other appropriate equipment for the job.</td></tr><tr><td></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td></td><td></td><td></td><td></td><td></td><td></td></tr></table> Hazard and Risk - Sample Risk Assessment Form CCOHS

Source excerpt

# Hazard assessment worksheet: Eye and face protection (cont.) ## PPE required (cont.) OSHA Oregon OSHA Department of Consumer and Business Services # Hazard assessment worksheet: Head protection Salem Central Office [redacted street address]. NE Salem, OR [redacted postal code] Phone: [redacted phone] Toll-free: [redacted phone] osha.oregon.gov Work task: Date ## Potential hazards No hazards requiring head protection Overhead objects that could fall Exposed pipes or beams (less than 6.5 feet overhead) Energized electrical equipment Other hazard: <table><tr><th>PPE required</th></tr><tr><td>None required</td></tr><tr><td>Impact Type I</td></tr><tr><td>Impact Type II</td></tr><tr><td>Electrical Class G (general)</td></tr><tr><td>Electrical Class E (electrical)</td></tr><tr><td>Electrical Class C (conductive)</td></tr><tr><td>Other PPE:</td></tr></table> 440-5871 (07/23/COM)

Source excerpt

# Hazard assessment worksheet: Leg protection (cont.) ## PPE required (cont.) OSHA Oregon OSHA Department of Consumer and Business Services # Hazard assessment worksheet: Hand protection Salem Central Office [redacted street address]. NE Salem, OR [redacted postal code] Phone: [redacted phone] Toll-free: [redacted phone] osha.oregon.gov Work task: Date ## Potential hazards - No hazards requiring hand protection - Harmful or hazardous temperatures - Chemicals that can be absorbed into the skin or cause burns - Energized electrical equipment - Mechanical equipment that can cause bruises, abrasions, cuts, punctures, fractures, or amputations Other hazard: ## PPE required None required - Cut resistant gloves General-purpose work gloves Chemical resistant gloves ............... Insulated gloves Heat and flame resistant gloves Latex or nitrile gloves Electrician's insulated rubber gloves Cotton, leather, or anti-vibration gloves Other PPE: 440-5871 (07/23/COM)

Source excerpt

# Hazard assessment worksheet: Head protection (cont.) ## Potential hazards (cont.) OSHA Oregon OSHA Department of Consumer and Business Services # Hazard assessment worksheet: Foot protection Salem Central Office [redacted street address]. NE Salem, OR [redacted postal code] Phone: [redacted phone] Toll-free: [redacted phone] osha.oregon.gov Work task: Date ## Potential hazards - No hazards requiring foot protection - Heavy objects such as barrels or tools that might roll onto or fall on a worker's feet - Sharp objects such as nails or spikes that could pierce the soles or uppers of ordinary shoes - Molten metal Hot, wet, or slippery surfaces Energized electrical equipment Other hazard: ## PPE required None required Steel toe shoes Boots or shoes metatarsal guards Slip resistant soles Puncture resistant soles Chemical resistant boots Insulated boots or shoes Other PPE: 440-5871 (07/23/COM)

Source excerpt

OSHA Oregon OSHA PPE hazard assessment tool Department of Consumer and Business Services [redacted street address]. NE Salem, OR [redacted postal code] Phone: [redacted phone] •Toll-free: [redacted phone] • osha.oregon.gov Fill in this document to certify that you completed a hazard assessment of your workplace, and keep it on file. Oregon OSHA recommends regular hazard assessments to keep your workplace safe. Survey as often as necessary to identify changing safety and health hazards that require personal protective equipment (PPE). Workplace assessed: <empty> Name/position of the person certifying the assessment: <empty> Signature of the person certifying the assessment: <empty> Date: <empty> ## PPE required at this workplace includes (check all that apply): Fall protection: [ ] Torso protection: [ ] Eye and face protection: [ ] Head protection: [ ] Foot protection: [ ] Leg protection: [ ] Hand protection: [ ] Hearing protection: [ ] Respiratory protection: [ ] 440-5871 (07/23/COM)

Source excerpt

# HEAVY EQUIPMENT (cont.) ## SPOTTERS Worker visibility and visual and verbal communication are essential to keeping workers safe around moving construction equipment. Blind spots can be a significant hazard for workers on the ground where the operator is unable to see them. A spotter, using effective means of communication or hand signals, can help communicate between the operator, workers on the ground, and any pedestrians entering the work zone. Spotters must wear high-visibility clothing, stand clear of equipment, and always be visible to the equipment operator. ## GENERAL SAFETY WHEN OPERATING OR WORKING AROUND HEAVY EQUIPMENT • Develop a work zone traffic control plan. Indicate travel routes through the site to eliminate (as much as possible) the need for backing equipment or vehicles. • When vehicles or heavy equipment must operate in reverse, ensure they are equipped with an audible backup alarm. • Inspect equipment before operation to ensure all lights and audible alarms work correctly. • Set up the equipment in the work zone so that construction equipment and workers have adequate space to perform the planned tasks. • Use 3-point mounting and dismounting technique off heavy equipment - NEVER JUMP OFF HEAVY EQUIPMENT. • - Establish a "danger zone," the working area where contact could result in personal injury or damage during operations. • Wear high-visibility clothing when working around heavy mobile equipment. • Use predefined and understood hand signals or two-way radios to control movement within the work zone. • Maintain a clear line of sight between the operator and workers. • Use a spotter when heavy equipment is in motion. This requires communication between the operator and workers to maintain safe movement. • Workers - should keep a safe distance from all sides of the heavy equipment while it is in use. • Be aware of the swing radius on specific equipment and, if possible, cordon off the area with barriers or caution tape. • A…

Source excerpt

## PPE required at this workplace includes (check all that apply): (cont.) OSHA Oregon OSHA Department of Consumer and Business Services Hazard assessment worksheet: Fall protection Salem Central Office [redacted street address]. NE Salem, OR [redacted postal code] Phone: [redacted phone] Toll-free: [redacted phone] osha.oregon.gov Work task: Date ## Potential hazards No hazards requiring fall protection Unguarded surfaces more than 6 or 4 feet above a lower level or any height above dangerous equipment Other hazard: ## PPE required None required Personal fall arrest system Personal fall restraint system Other PPE: 440-5871 (07/23/COM)