Questions and practical guidance about injuries, near misses, reporting, investigation, corrective actions, and learning from incidents.
Safe Handling of Acetone ======================== *Date:** 2026-03-09 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To provide employees with the knowledge and procedures necessary for the safe handling, storage, and disposal of acetone, minimizing the risk of fire
Read the threadRegular safety inspections of rigging equipment are crucial in the construction industry to prevent injuries. These inspections should be part of a broader safety program that includes hazard recognition and elimination. A comprehensive inspection procedure should include the following: Daily Inspections: Cranes and
Read the threadAbrasive Wheel Cutting Operations: PPE Safety ============================================= *Date:** 2026-03-06 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure all personnel understand the correct selection, use, and maintenance of personal protective
Read the threadSafe Work Procedure: Pilot Vehicle Operation \& Traffic Control =============================================================== Document Number: \[SWP-NUMBER] Revision Date: \[DATE] Next Review Date: \[NEXT REVIEW DATE] Department: \[DEPARTMENT NAME] 1\. Scope This safe work procedure (SWP) outlines the requirements
Read the threadSafe Workplace Driving Practices ================================ *Date:** 2026-03-03 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To promote safe driving habits and reduce the risk of vehicle-related incidents in the workplace. Introduction Driving is a critical
Read the threadPreventing Recurrence of Safety Violations and Unsafe Acts ========================================================== *Date:** 2026-03-03 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To reinforce the importance of adhering to safety protocols and preventing the
Read the threadDuring March equipment maintenance, it is crucial to adhere to eye safety procedures and PPE requirements to prevent injuries from hazards such as flying particles, molten metal splashes, liquid chemicals, acids or caustic liquids, chemical gases or vapors, harmful light radiation, and bloodborne pathogens. [1] The
Read the threadHere is a monthly safety briefing on fatigue risk management and prevention strategies: *What is Fatigue?** Fatigue is a state of weariness, tiredness, or lack of energy that reduces a person's ability to work safely and effectively. It can result from mental or physical exertion or illness and increases the risk of
Read the threadElectrical Shock Protection Methods and Safety Regulations ========================================================== *Date:** 2026-02-25 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To educate workers on electrical shock protection methods and relevant safety
Read the threadWhen unloading pipes from semi-trailers, it's crucial to follow safe procedures to prevent injuries and damage. Here's a breakdown of key considerations: Before unloading, ensure the trailer is parked on a level surface and secured to prevent rolling. Chock the wheels and engage any available trailer restraint systems.
Read the threadSafe Driving Practices in Urban Environments ============================================ *Date:** 2026-02-19 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To promote safe driving habits and hazard awareness in urban settings to prevent accidents and ensure the
Read the threadBritish Columbia's vehicle safety compliance is regulated under the Occupational Health and Safety Regulation. Part 17 addresses the transportation of workers and includes requirements for vehicle design, maintenance, and operation. Key aspects include general responsibilities, seating and seat belt requirements, and
Read the threadVehicle Safety: Guidelines and Regulatory Compliance ==================================================== *Date:** 2026-02-19 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure all personnel understand the safety guidelines and regulatory requirements for
Read the threadRelay Testing Safety in PMCC Panels =================================== *Date:** 2026-02-19 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure safe and effective relay testing within Power, Motor, and Control Center (PMCC) panels by understanding potential
Read the threadSafe Testing Procedures and Risk Assessment for Protective Relays ================================================================= *Date:** 2026-02-19 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure all personnel understand and follow safe testing
Read the threadPortable Fire Extinguisher Safety ================================= *Date:** 2026-02-18 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure all employees understand the safe use, inspection, and maintenance of portable fire extinguishers. Introduction Portable
Read the threadHand and Finger Injury Prevention ================================= *Date:** 2026-02-18 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To increase awareness of hand and finger injury hazards and promote preventative measures in the workplace. Introduction Our hands
Read the threadRecognizing and Responding to Health Emergencies in Truck Drivers ================================================================= *Date:** 2026-02-17 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To equip truck drivers with the knowledge and skills to recognize
Read the threadIntroduction to Mandatory PPE Requirements on Construction Sites ================================================================ *Date:** 2026-02-16 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure all personnel understand the mandatory Personal Protective
Read the thread\[PRE TASK PLAN TITLE] ====================== *Project:** \[PROJECT NAME] *Date:** 2026-02-15 *Location:** \[LOCATION] *Supervisor:** \[SUPERVISOR NAME] Task Overview A comprehensive pre-task plan for equipment inspection, emphasizing safety protocols, hazard identification, and regulatory compliance. *Expected
Read the threadConstruction Site PPE: Subcontractor High-Visibility Compliance ================================================================ *Date:** 2026-02-13 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective Ensure all subcontractors understand and adhere to mandatory
Read the threadMandatory Use of High-Visibility Clothing ========================================== *Date:** 2026-02-13 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To reinforce the importance of wearing branded high-visibility clothing on the construction site to ensure worker
Read the threadHydraulic Hose Replacement on Smartrock T45 Drill Machine ========================================================= *Assessment Date:** \[DATE] *Assessor:** \[ASSESSOR NAME] *Department/Area:** \[DEPARTMENT/AREA] *Review Date:** \[REVIEW DATE] 1\. Assessment Scope This Job Safety Analysis (JSA) covers the hydraulic
Read the threadEnhancing Situational Awareness =============================== *Date:** 2026-02-09 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To improve employees' ability to identify hazards and assess risks in their surroundings to prevent workplace incidents and injuries.
Read the threadFostering a Respectful Work Environment and Ensuring Personal Safety ==================================================================== *Date:** 2026-02-09 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To promote a respectful work environment, enhance personal
Read the threadTeamwork and Collaborative Safety Practices =========================================== *Date:** 2026-02-09 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective Promote a culture of teamwork and shared responsibility for safety on the job site. Introduction Effective
Read the threadCOSHH and Chemical Spill Management on Construction Sites ========================================================= *Date:** 2026-02-05 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To provide construction workers with the knowledge and procedures necessary to
Read the threadTo prevent accidents and injuries when using hand tools, knives, and power tools, it's crucial to establish a comprehensive safety policy and safe work procedures. These should align with relevant safety regulations and standards. Key components of a safety policy include: Maintaining tools in good condition through
Read the threadSafe Work Procedure for Joint OHS Committee Meetings ==================================================== Document Number: \[SWP-NUMBER] Revision Date: \[DATE] Next Review Date: \[NEXT REVIEW DATE] Department: \[DEPARTMENT NAME] 1\. Scope This safe work procedure (SWP) outlines the steps for conducting effective Joint
Read the threadImportance of Regularly Reviewing and Updating Standard Operating Procedures (SOPs) =================================================================================== *Date:** 2026-01-30 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To emphasize the importance of
Read the threadJob Hazard Analysis for Welding Stainless Steel =============================================== *Assessment Date:** \[DATE] *Assessor:** \[ASSESSOR NAME] *Department/Area:** \[DEPARTMENT/AREA] *Review Date:** \[REVIEW DATE] 1\. Assessment Scope This Job Hazard Analysis (JHA) covers the welding of stainless steel
Read the threadHazard Identification and Risk Assessment ========================================= *Date:** 2026-01-29 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To understand and apply hazard identification and risk assessment procedures in compliance with safety regulations
Read the threadPre-Use Equipment Walk-Around Inspections =========================================== *Date:** 2026-01-29 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure equipment is safe to operate by identifying hazards, reporting defects, and complying with safety
Read the threadSafe Work Practices for Concrete Crushing Operations ==================================================== *Date:** 2026-01-29 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure all personnel understand and implement safe work practices during concrete crushing
Read the threadElevated Work Platform (EWP) and Scissor Lift Safety ==================================================== *Date:** 2026-01-29 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure all personnel understand and adhere to safety procedures for operating EWPs and
Read the threadMaintaining a Clean and Organized Job Site ========================================== *Date:** 2026-01-26 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To understand the importance of maintaining a clean and organized job site to prevent accidents and ensure
Read the threadHere's a comprehensive electrical glove exchange program for HVAC mechanical service contractors: 1\. Program Overview: The program ensures compliance with safety regulations by detailing a 6-month exchange interval using inspected gloves. It includes procedures for storing and inspecting exchanged gloves one month
Read the threadTo ensure safety when using high-pressure hoses and associated equipment, it is important to follow proper inspection and maintenance procedures, and adhere to regulatory compliance. Key safety procedures include: Regular Inspections: Flexible hoses and fittings should be checked for leaks at their junctions. Threaded
Read the threadSafe Rigging and Lifting Procedures for Unloading Packers ========================================================= *Date:** 2026-01-22 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure the safe unloading of 1000 lb packers by adhering to proper rigging and
Read the threadSafe Use of Lifting Attachments for 1000 lb Packers =================================================== *Date:** 2026-01-22 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure the safe and compliant use of lifting attachments when moving and unloading 1000 lb
Read the threadSafe Storage of Oxygen and Acetylene Cylinders ============================================== *Date:** 2026-01-21 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure all personnel understand the safety requirements for storing oxygen and acetylene cylinders on
Read the threadElectrical Safety Risk Assessment ================================= *Assessment Date:** \[DATE] *Assessor:** \[ASSESSOR NAME] *Department/Area:** \[DEPARTMENT/AREA] *Review Date:** \[REVIEW DATE] 1\. Assessment Scope This risk assessment covers all electrical work activities performed by employees, contractors, and
Read the threadNighttime Road Construction Safety ================================== *Date:** 2026-01-20 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure the safety of workers and the public during nighttime road construction by identifying hazards, implementing effective
Read the threadGeneral Industry Hazard Communication Safety ============================================ *Date:** 2026-01-19 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure employees understand the importance of hazard communication and how to access and interpret safety
Read the threadIn construction and industrial settings, if there is a foreseeable danger of injury to a worker's head at a work site, the employer must ensure that the worker wears protective headwear that is appropriate to the hazards. If there is a significant possibility of lateral impact to the head, the protective headwear must
Read the threadSafe Work Procedure: Liquid Membrane Application on Decks ========================================================= Document Number: \[SWP-NUMBER] Revision Date: \[DATE] Next Review Date: \[NEXT REVIEW DATE] Department: \[DEPARTMENT NAME] 1\. Scope This safe work procedure (SWP) outlines the steps for the safe
Read the threadHazard Identification and Risk Mitigation for Road Construction Site Operations =============================================================================== *Date:** 2026-01-16 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To understand common hazards on road
Read the threadRefreshing Flagging and Signaling Procedures ============================================ *Date:** 2026-01-15 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To reinforce proper flagging and signaling techniques to prevent accidents and ensure the safety of workers
Read the threadWorking Safely Near Water Hazards ================================= *Date:** 2026-01-15 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure all personnel understand the risks associated with working near water and the necessary precautions to prevent accidents
Read the threadPreventing Dehydration and Heat Stress in the Workplace ======================================================= *Date:** 2026-01-15 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To educate workers on the importance of hydration and recognizing the symptoms of
Read the threadSafe Crane Lifting Operations ============================= *Date:** 2026-01-15 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure all personnel involved in crane lifting operations understand the procedures, hazards, and control measures necessary for safe
Read the threadSite-Specific Hazard Risk Assessment ===================================== *Assessment Date:** \[DATE] *Assessor:** \[ASSESSOR NAME] *Department/Area:** \[DEPARTMENT/AREA] *Review Date:** \[REVIEW DATE] 1\. Assessment Scope This risk assessment covers all site-specific activities and operations, including but not
Read the threadRailcar Operations Safety ========================= *Date:** 2026-01-15 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure all personnel understand and follow safe work practices during railcar operations to prevent injuries and maintain regulatory compliance.
Read the threadFall Protection Safety Harness: Inspection, Fitting, and Safe Use ================================================================= *Date:** 2026-01-14 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure workers understand the proper inspection, fitting, and
Read the threadManaging Emotions in the Workplace ================================== *Date:** 2026-01-14 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To promote a positive mental health environment by understanding and managing stress and anger effectively. Introduction This
Read the threadArc Flash Hazards and Prevention ================================ *Date:** 2026-01-14 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To understand arc flash hazards, implement preventive measures, and follow safety procedures to minimize the risk of arc flash
Read the threadAddressing Workplace Grievances and Complaints ============================================== *Date:** 2026-01-14 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To equip employees with the knowledge and skills to address workplace grievances and complaints
Read the threadElectrical Shutdown Procedures and Lockout/Tagout (LOTO) ======================================================== *Date:** 2026-01-13 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To understand and implement safe electrical shutdown procedures, including proper
Read the threadWelding Safety ============== *Date:** 2026-01-13 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To understand the hazards associated with welding and implement safe work practices to prevent injuries and incidents. Introduction Welding involves potential hazards
Read the threadSafe Use and Handling of Controlled Atmosphere Zones (CAZ) ========================================================== *Date:** 2026-01-13 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To ensure all personnel understand the hazards associated with Controlled
Read the threadJoin 400K users across 150K sites already on SALUS.
No commitment · 30-minute personalized walkthrough
