Skip to content
All safety questions
Asked by a personGeneral — US and Canadaen-CA

what are the biggest causes of injury onsite in NYC

A person submitted this question to Rosie's free generator. The asker's identity is neither imported nor published.

Rosie's answer

Published by SALUS

I am sorry, but I cannot provide a specific list of the biggest causes of injury onsite in NYC. The documents provided do not contain that information. However, the documents do provide general safety information that can help reduce the risk of injury. For example, employers are responsible for frequent and regular inspections of job sites, materials, and equipment [1]. Also, a work site should be kept clean and free from materials or equipment that could cause workers to slip or trip [2].

2 source record(s)

Sources used for this answer

[1] Spider by Brand Safway: Swing Stage Operator’s Manual

Page 3

Open source document

Source excerpt

## CAUTION Hazardous Working Environment This equipment is used off the ground in high or dangerous places. Anyone using this equipment is exposed to a hazardous working environment. Users must be properly trained in the use and rigging of this equipment and be familiar with all applicable local, state, and federal codes; safety rules and regulations pertaining to single and two-point suspension scaffolding; general safety and health provisions; and personal protective and lifesaving equipment. The Scaffolding shall be properly assembled according to instructions available from your Spider representative. Guardrails, midrails, and toeboards shall be used as required by local, state, and federal regulations. Their use is recommended in all cases. The working surface shall be level at all times. This equipment should not be used by persons affected by (but not limited to) the following: ill health, not of sound mind or body, under the influence of alcohol or drugs, acrophobia, arachnophobia, epilepsy, fainting spells, suicidal tendency, despondency, or prone to accidents. Safety lines and harnesses shall be used in accordance with federal and state law. Neither the manufacturer nor its distributors can know of, anticipate, or warn against all dangers that exist or can ever arise. Be alert to recognize all dangers, known and unknown. Oil, grease, slippery material, or unstable objects such as barrels, boxes, loose bricks, tools, or debris shall not be allowed to accumulate on work surfaces. Do not use the product if the decking surface is damaged or has deteriorated. Coat wood decking periodically with a wood preservative. Do not paint. Do not place ladders or other devices on the scaffold to gain greater height. Never climb on to stages from a ladder, unless both the stage and the ladder are secured from moving in all directions. Do not use platform to transfer workers. Do not store tools, materials, or equipment on planks or platforms that are being moved. The

[2] Occupational Health and Safety Code

Page 123

Open source document

Source excerpt

## Part 12 General Safety Precautions ## Housekeeping 185 An employer must ensure that a work site is kept clean and free from materials or equipment that could cause workers to slip or trip. ## Lighting 186 (1) An employer must ensure that lighting at a work site is sufficient to enable work to be done safely. 186 (2) An employer must ensure that a light source above a working or walking surface is protected against damage. - 186 (3) An employer must ensure that there is emergency lighting at a work site if workers are in danger if the normal lighting system fails. - 186 (4) Emergency lighting must generate enough light so that workers can - (a) leave the work site safely, - (b) start the necessary emergency shut-down procedures, and - (c) restore normal lighting. ## Pallets and storage racks 187 (1) An employer must ensure that pallets used to transport or store materials or containers are loaded, moved, stacked, arranged and stored in a manner that does not create a danger to workers. - 187 (2) An employer must ensure that racks used to store materials or equipment - (a) are designed, constructed and maintained to support the load placed on them, and - (b) are placed on firm foundations that can support the load. - 187 (3) A worker must report any damage to a storage rack to an employer as quickly as practicable. - 187 (4) The employer and the workers at a work site must take all reasonable steps to prevent storage racks from being damaged to the extent that their integrity as structures is compromised. ## Placement of roofing materials - 187.1 (1) An employer must ensure that supplies and roofing materials stored on the roof of a residential building under construction are located not less than 2 metres from a roof edge. - 187.1 (2) An employer must ensure that the weight of supplies and roofing materials referred to in subsection (1) is uniformly distributed.

Related Q&A

Keep exploring.

Human questionGeneral

Cdl training

Toolbox Talk: CDL Training and Safety *Date:** [DATE] *Duration:** [DURATION] minutes *Presenter:** [PRESENTER NAME] *Location:** [LOCATION] Objective The objective of this toolbox talk is to ensure that all participants understand the importance of proper training and safety measures for operating commercial vehicles.

Read the thread
Human questionGeneral

Hanging drywall

Pre-Task Plan: Hanging Drywall Date: [DATE] Work Area: [WORK AREA] Task Supervisor: [SUPERVISOR NAME] 1. Task Description Hanging drywall involves lifting, positioning, and securing drywall panels to the framing of walls and ceilings. 2. Task Duration Estimated Start: [START TIME] Estimated Completion: [END TIME] 3.

Read the thread
Human questionGeneral

d

General Safety Procedures and Potential Hazards =============================================== This document outlines the critical safety procedures and potential hazards associated with operating and maintaining the equipment. It is essential to understand and follow these guidelines to prevent accidents and

Read the thread
Human questionGeneral

Replace a three phase motor

Pre-Task Plan: Replace a Three-Phase Motor Date: [DATE] Work Area: [WORK AREA] Task Supervisor: [SUPERVISOR NAME] 1. Task Description Replacing a three-phase motor, including disconnecting the old motor, removing it, installing the new motor, and reconnecting it to the power supply. 2. Task Duration Estimated Start

Read the thread
Human questionGeneral

Heavy equipment

Toolbox Talk: Heavy Equipment Safety *Date:** [DATE] *Duration:** [DURATION] minutes *Presenter:** [PRESENTER NAME] *Location:** [LOCATION] Objective The objective of this toolbox talk is to educate participants on the safe operation and handling of heavy equipment to prevent accidents and injuries on the job site.

Read the thread
Human questionGeneral

What is the fall protection trigger height for residential framers in California?

Toolbox Talk: Fall Protection in Residential Framing *Date:** [DATE] *Duration:** [DURATION] minutes *Presenter:** [PRESENTER NAME] *Location:** [LOCATION] Objective The objective of this toolbox talk is to ensure that all employees understand the fall protection requirements for residential construction activities

Read the thread
Discussion thread

Add your experience.

Community answers can add practical context. They are moderated, but they are not SALUS-reviewed safety guidance.

New contributions are temporarily closed while the moderation queue is configured.

Community answers(0)

No community answers have been approved yet.

Comments on Rosie's answer(0)

No comments have been approved yet.

Ready to put operational safety to work?

Join 400K users across 150K sites already on SALUS.

No commitment · 30-minute personalized walkthrough