What brand of gloves are good for handling wire cable
A person submitted this question to Rosie's free generator. The asker's identity is neither imported nor published.
Rosie's answer
Published by SALUSWhen handling wire cable, it's important to protect your hands with suitable safety gloves. While specific brands aren't mentioned in the provided documents, the following materials are recommended for safety gloves based on ANSI/ISEA 105 and 29 CFR 1910.138 1, 2, 7:
- Polychloroprene (CR): thickness >=0,5mm; breakthrough time >=480min 1, 7
- Nitrile rubber (NBR): thickness >=0,35mm; breakthrough time >=480min 1, 7
- Butyl rubber (IIR): thickness >=0,5mm; breakthrough time >=480min 1, 7
- Fluorinated rubber (FKM): thickness >=0,4mm; breakthrough time >=480min 2, 7
Also, consider contacting suppliers of CE-approved gloves, such as KCL GmbH, for recommendations specific to your task 3, 4, 8, 9, 11, 12, 13, 15, 16, 17, 18, 19, 20.
This answer was preserved from its published ai.salussafety.io page. The legacy export contains no separate citation records for this answer, so SALUS has not invented any.
Keep exploring.
what make Pete a safety rockstar on the job site
I am sorry, but I do not have the information to answer the question about what makes Pete a safety rockstar on the job site. The documents provided do not contain information about Pete or specific examples of individuals demonstrating excellent safety practices.
Read the threadmental health awareness
I am sorry, but the provided documents do not contain information about mental health awareness. Therefore, I am unable to answer your question.
Read the threadPOLICY ON MONIOTR CALIBRATIONS FOR EVERY 90 DAYS
I am sorry, but my knowledge base does not contain information on the specific topic you asked about. Therefore, I am unable to provide a response.
Read the threadcut my finger
If you have cut your finger, it's important to take immediate action to prevent infection and promote healing. Here are the steps you should follow: Clean the Wound: Rinse the cut under clean, running water to remove any dirt or debris. Avoid using soap directly on the wound as it can irritate it. Stop the Bleeding
Read the threadWhat pipe is required for a lock out
A lockout procedure is required for any pipe that carries a substance under pressure when it is being serviced, repaired, tested, adjusted, or inspected, or if any other work is to be performed on it that requires the control of hazardous energy. The procedure ensures that flow in the piping or pipeline has been
Read the threadcan we use a 3 step ladder and stand on the top rujng
Standing on the top rung of a ladder can be hazardous and is generally not recommended. Ladders should be inspected before each use for defects, and any faulty ladders should be repaired or discarded. When using a ladder, always face the ladder and keep your body centered between the side rails. It is also important to
Read the threadAdd your experience.
Community answers can add practical context. They are moderated, but they are not SALUS-reviewed safety guidance.
New contributions are temporarily closed while the moderation queue is configured.
Community answers(0)
No community answers have been approved yet.
Comments on Rosie's answer(0)
No comments have been approved yet.