what is the general rule for rigging equipment inspection regimn
A person submitted this question to Rosie's free generator. The asker's identity is neither imported nor published.
Rosie's answer
Published by SALUSTo ensure safe operation and prevent accidents, routine inspection of rigging equipment should be performed. Here are some guidelines to consider:
- Cranes and derricks should be inspected daily before use to ensure they are in good condition. [1]
Sources used for this answer
[1] MOSH Construction Checklist For Self-Inspection
Page 1
Open source documentSource excerpt
# MOSH ## To Employers & Workers: The rate of injury for workers in the construction industry is approximately 60 percent higher than the overall average for all workers. Recognition of hazards and their elimination is essential to prevention of job-related injuries. Listed on the following pages are are series of questions that persons working in construction should answer during a self inspection. The checklist has been designed to increase the knowledge and awareness of employees and employers. A general checklist for self-inspection for all industries is available and includes safety and health question on machines and equipment, electrical wiring, fire protection, environment and housekeeping, etc. For assistance or advice, On-Site Consultation Services are available to employers. Please call (410) 527-4472 for this free service. This publication is not intended to be legal interpre- tation of the provisions of "MOSH" Law or standards or to place any additional requirements on employ- ers or employees. ## Concrete YES NEEDS ACTION 1. Is formwork and shoring adequate to support all intended loads during concrete placement? ...... 2. Are protruding rebars covered or bent over where work must be performed overhead?. 3. Do employees wear gloves and eye protection during stripping operations?. 4. Are nails removed or bent over stripped forms?.. 5. Are clear pathways maintained through stripping areas?... CEMENT # CONSTRUCTION CHECKLIST FOR SELF-INSPECTION <table><tr><th></th><th>Cranes</th><th>YES NEEDS ACTION</th></tr><tr><td>1.</td><td>Are cranes and derricks restricted from operating within 20 feet of any electrical power line?...</td><td></td></tr><tr><td>2.</td><td>Are rated capacities, operating speed, and instructions posted and visible to the operator?....</td><td></td></tr><tr><td>3.</td><td>Does the operator understand and use the load chart?</td><td></td></tr><tr><td>4.</td><td>Is the operator able to determine the angle and length of the …
Keep exploring.
Write a toolbox talk on Staying safe
Maintaining Workplace Safety and Preventing Accidents ===================================================== *Date:** 2026-01-15 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To reinforce the importance of maintaining a safe work environment by identifying hazards
Read the threadClimbing structures
Toolbox Talk: Climbing Structures *Date:** [DATE] *Duration:** [DURATION] minutes *Presenter:** [PRESENTER NAME] *Location:** [LOCATION] Objective The objective of this toolbox talk is to educate participants on the safe practices and regulations associated with climbing structures, including ladders and scaffolds, to
Read the threadOperating in the rain
Toolbox Talk: Operating in the Rain *Date:** [DATE] *Duration:** [DURATION] minutes *Presenter:** [PRESENTER NAME] *Location:** [LOCATION] Objective To educate participants on the safety precautions and procedures necessary for operating machinery safely in rainy conditions, ensuring both personal safety and the
Read the threadTrenching and Excavation Safety
Trenching and Excavation Safety =============================== *Date:** 2025-07-24 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective The objective of this toolbox talk is to ensure all personnel understand the hazards associated with trenching and excavation work and
Read the threadFall Prevention and Protection
Toolbox Talk: Fall Prevention and Protection *Date:** [DATE] *Duration:** [DURATION] minutes *Presenter:** [PRESENTER NAME] *Location:** [LOCATION] Objective To educate workers on fall hazards, proper use of fall protection systems, and safe work procedures to prevent falls and injuries from heights. Introduction Falls
Read the threadProtect ya crotch
To protect the lower body, including the crotch area, from risks such as cuts, punctures, irritation, or abrasions, it is essential to use appropriate protective gear. According to the Occupational Health and Safety Regulations, employers must ensure that workers at risk use safety pants or chaps suitable for the work
Read the threadAdd your experience.
Community answers can add practical context. They are moderated, but they are not SALUS-reviewed safety guidance.
New contributions are temporarily closed while the moderation queue is configured.
Community answers(0)
No community answers have been approved yet.
Comments on Rosie's answer(0)
No comments have been approved yet.