does the first person to install a temporary guardrail need to be tied off
A person submitted this question to Rosie's free generator. The asker's identity is neither imported nor published.
Rosie's answer
Published by SALUSPersonnel must use fall protection at all times, including a full body harness with a lanyard not to exceed 6 ft (1\.8 m) in length, that limits the maximum arrest force to 900 lb (408 kg) for the transfastener type and 1350 lb (612 kg) for the shuttle type fall arrest system. [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16]
Sources used for this answer
[1] JLG - Boom Lifts : 800AJ HC3 - Operation (PN 31222411)
Page 103
Open source documentSource excerpt
# Table 7. Accessories/Options Relationship Table (continued) (cont.) ## 6.2.1 Inspection Before Use (cont.) Accessories - Attachment Ring: No cracks or signs of wear are acceptable. Any signs of corrosion requires replacement. - Attaching Hardware: Inspect all attaching hardware to ensure there are no missing components and hardware is properly tightened. - Platform Rails: No visible damage is acceptable. ## 6.3 FABRIC MESH TO MID OR TOP RAIL BM000014A BM000013A Figure 23. Fabric Mesh to Mid Rail Figure 24. Fabric Mesh to Top Rail The Fabric Mesh accessory consists of a flame retardant, lightweight mesh which is attached to the mid platform rail or the top platform rail. ## 6.4 FALL ARREST PLATFORM Note: See the JLG External Fall Arrest System manual (PN 3128935) for more detailed information. The external fall arrest system is designed to provide a lanyard attach point while allowing the operator to access areas outside the platform. Exit/enter the platform through the gate area only. The system is designed for use by one person. Personnel must use fall protection at all times. A full body harness is required with lanyard not to exceed 6 ft (1.8 m) in length, that limits the maximum arrest force to 900 lb (408 kg) for the transfastener type and 1350 lb (612 kg) for the shuttle type fall arrest system. 800AJ HC3 31222411 103
[2] JLG - Boom Lifts : 600S, 660SJ - Operation (PN 31222366)
Page 106
Open source documentSource excerpt
# 6.2 BOLT-ON EXTERNAL FALL ARREST (cont.) ## Accessories - Attachment Ring: No cracks or signs of wear are acceptable. Any signs of corrosion requires replacement. - Attaching Hardware: Inspect all attaching hardware to ensure there are no missing components and hardware is properly tightened. - Platform Rails: No visible damage is acceptable. ## 6.3 FABRIC MESH TO MID OR TOP RAIL BM000014A BM000013A Figure 24. Fabric Mesh to Mid Rail Figure 25. Fabric Mesh to Top Rail The Fabric Mesh accessory consists of a flame retardant, lightweight mesh which is attached to the mid platform rail or the top platform rail. ## 6.4 FALL ARREST PLATFORM Note: See the JLG External Fall Arrest System manual (PN 3128935) for more detailed information. The external fall arrest system is designed to provide a lanyard attach point while allowing the operator to access areas outside the platform. Exit/enter the platform through the gate area only. The system is designed for use by one person. Personnel must use fall protection at all times. A full body harness is required with lanyard not to exceed 6 ft (1.8 m) in length, that limits the maximum arrest force to 900 lb (408 kg) for the transfastener type and 1350 lb (612 kg) for the shuttle type fall arrest system. 106 31222366 600S, 660SJ
[3] JLG - Boom Lifts : 400S, 460SJ - Operation (PN 31220365)
Page 108
Open source documentSource excerpt
# 6.3 CABLE LADDER CARRIER (cont.) Accessories ## 6.4 FABRIC MESH TO MID OR TOP RAIL BM000014A Figure 24. Fabric Mesh to Mid Rail BM000013A Figure 25. Fabric Mesh to Top Rail The Fabric Mesh accessory consists of a flame retardant, lightweight mesh which is attached to the mid platform rail or the top platform rail. ## 6.5 FALL ARREST PLATFORM Note: See the JLG External Fall Arrest System manual (PN 3128935) for more detailed information. The external fall arrest system is designed to provide a lanyard attach point while allowing the operator to access areas outside the platform. Exit/enter the platform through the gate area only. The system is designed for use by one person. Personnel must use fall protection at all times. A full body harness is required with lanyard not to exceed 6 ft (1.8 m) in length, that limits the maximum arrest force to 900 lb (408 kg) for the transfastener type and 1350 lb (612 kg) for the shuttle type fall arrest system. ## 6.5.1 Safety Precautions ## ! WARNING Do not operate any machine functions while outside the platform. Use caution when entering/exiting the platform at elevation. 108 31220365 400S, 460SJ
[4] JLG - Boom Lifts : 600S HC3, 660SJ HC3 - Operation (PN 31220613)
Page 116
Open source documentSource excerpt
# 6.2 BOLT-ON EXTERNAL FALL ARREST (cont.) ## Accessories - Attachment Ring: No cracks or signs of wear are acceptable. Any signs of corrosion requires replacement. - Attaching Hardware: Inspect all attaching hardware to ensure there are no missing components and hardware is properly tightened. - Platform Rails: No visible damage is acceptable. ## 6.3 FABRIC MESH TO MID OR TOP RAIL BM000014A BM000013A Figure 28. Fabric Mesh to Mid Rail Figure 29. Fabric Mesh to Top Rail The Fabric Mesh accessory consists of a flame retardant, lightweight mesh which is attached to the mid platform rail or the top platform rail. ## 6.4 FALL ARREST PLATFORM Note: See the JLG External Fall Arrest System manual (PN 3128935) for more detailed information. The external fall arrest system is designed to provide a lanyard attach point while allowing the operator to access areas outside the platform. Exit/enter the platform through the gate area only. The system is designed for use by one person. Personnel must use fall protection at all times. A full body harness is required with lanyard not to exceed 6 ft (1.8 m) in length, that limits the maximum arrest force to 900 lb (408 kg) for the transfastener type and 1350 lb (612 kg) for the shuttle type fall arrest system. 116 31220613 600S HC3, 660SJ HC3
[5] JLG - Boom Lifts : 1500AJP - Operation (PN 31222390)
Page 121
Open source documentSource excerpt
# Table 6. Accessories/Options Relationship Table (continued) (cont.) ## 7.2.1 Inspection Before Use (cont.) Accessories - Attachment Ring: No cracks or signs of wear are acceptable. Any signs of corrosion requires replacement. - Attaching Hardware: Inspect all attaching hardware to ensure there are no missing components and hardware is properly tightened. - Platform Rails: No visible damage is acceptable. ## 7.3 FABRIC MESH TO MID OR TOP RAIL BM000014A BM000013A Figure 61. Fabric Mesh to Mid Rail Figure 62. Fabric Mesh to Top Rail The Fabric Mesh accessory consists of a flame retardant, lightweight mesh which is attached to the mid platform rail or the top platform rail. ## 7.4 FALL ARREST PLATFORM Note: See the JLG External Fall Arrest System manual (PN 3128935) for more detailed information. The external fall arrest system is designed to provide a lanyard attach point while allowing the operator to access areas outside the platform. Exit/enter the platform through the gate area only. The system is designed for use by one person. Personnel must use fall protection at all times. A full body harness is required with lanyard not to exceed 6 ft (1.8 m) in length, that limits the maximum arrest force to 900 lb (408 kg) for the transfastener type and 1350 lb (612 kg) for the shuttle type fall arrest system. 1500AJP 31222390 121
[6] JLG - Boom Lifts : 800S, 860SJ - Operation (PN 31219950)
Page 117
Open source documentSource excerpt
# Table 10. Accessories/Options Relationship Table (continued) (cont.) ## 6.2.1 Inspection Before Use (cont.) Accessories - Attachment Ring: No cracks or signs of wear are acceptable. Any signs of corrosion requires replacement. - Attaching Hardware: Inspect all attaching hardware to ensure there are no missing components and hardware is properly tightened. - Platform Rails: No visible damage is acceptable. ## 6.3 FABRIC MESH TO MID OR TOP RAIL BM000014A BM000013A Figure 32. Fabric Mesh to Mid Rail Figure 33. Fabric Mesh to Top Rail The Fabric Mesh accessory consists of a flame retardant, lightweight mesh which is attached to the mid platform rail or the top platform rail. ## 6.4 FALL ARREST PLATFORM Note: See the JLG External Fall Arrest System manual (PN 3128935) for more detailed information. The external fall arrest system is designed to provide a lanyard attach point while allowing the operator to access areas outside the platform. Exit/enter the platform through the gate area only. The system is designed for use by one person. Personnel must use fall protection at all times. A full body harness is required with lanyard not to exceed 6 ft (1.8 m) in length, that limits the maximum arrest force to 900 lb (408 kg) for the transfastener type and 1350 lb (612 kg) for the shuttle type fall arrest system. 800S, 860SJ 31219950 117
[7] JLG - Boom Lifts : EC600SJ, EC600SJP, H600SJ, H600SJP - Operation (PN 31222348)
Page 90
Open source documentSource excerpt
# 6.2 BOLT-ON EXTERNAL FALL ARREST (cont.) ## Accessories - Attachment Ring: No cracks or signs of wear are acceptable. Any signs of corrosion requires replacement. - Attaching Hardware: Inspect all attaching hardware to ensure there are no missing components and hardware is properly tightened. - Platform Rails: No visible damage is acceptable. ## 6.3 FALL ARREST PLATFORM Note: See the JLG External Fall Arrest System manual (PN 3128935) for more detailed information. The external fall arrest system is designed to provide a lanyard attach point while allowing the operator to access areas outside the platform. Exit/enter the platform through the gate area only. The system is designed for use by one person. Personnel must use fall protection at all times. A full body harness is required with lanyard not to exceed 6 ft (1.8 m) in length, that limits the maximum arrest force to 900 lb (408 kg) for the transfastener type and 1350 lb (612 kg) for the shuttle type fall arrest system. 90 31222348 EC600SJ, H600SJ, EC600SJP, H600SJP
[8] JLG - Boom Lifts : 800S, 860SJ - Operation (PN 31222372)
Page 107
Open source documentSource excerpt
# 6.2 BOLT-ON EXTERNAL FALL ARREST (cont.) ## 6.3 CABLE LADDER CARRIER (cont.) Accessories ## 6.4 FABRIC MESH TO MID OR TOP RAIL BM000014A Figure 30. Fabric Mesh to Mid Rail BM000013A Figure 31. Fabric Mesh to Top Rail The Fabric Mesh accessory consists of a flame retardant, lightweight mesh which is attached to the mid platform rail or the top platform rail. ## 6.5 FALL ARREST PLATFORM Note: See the JLG External Fall Arrest System manual (PN 3128935) for more detailed information. The external fall arrest system is designed to provide a lanyard attach point while allowing the operator to access areas outside the platform. Exit/enter the platform through the gate area only. The system is designed for use by one person. Personnel must use fall protection at all times. A full body harness is required with lanyard not to exceed 6 ft (1.8 m) in length, that limits the maximum arrest force to 900 lb (408 kg) for the transfastener type and 1350 lb (612 kg) for the shuttle type fall arrest system. 800S, 860SJ 31222372 107
[9] JLG - Boom Lifts : EC600SJ, EC600SJP, H600SJ, H600SJP - Operation (PN 3122317200)
Page 85
Open source documentSource excerpt
# NOTICE (cont.) ## 6.3 FABRIC MESH TO MID OR TOP RAIL Accessories BM000014A Figure 20. Fabric Mesh to Mid Rail BM000013A Figure 21. Fabric Mesh to Top Rail The Fabric Mesh accessory consists of a flame retardant, lightweight mesh which is attached to the mid platform rail or the top platform rail. ## 6.4 FALL ARREST PLATFORM Note: See the JLG External Fall Arrest System manual (PN 3128935) for more de- tailed information. The external fall arrest system is designed to provide a lanyard attach point while allowing the operator to access areas outside the platform. Exit/enter the platform through the gate area only. The system is designed for use by one person. Personnel must use fall protection at all times. A full body harness is required with lanyard not to exceed 6 ft (1.8 m) in length, that limits the maximum arrest force to 900 lb (408 kg) for the transfastener type and 1350 lb (612 kg) for the shuttle type fall arrest system. ## 6.4.1 Safety Precautions ## WARNING Do not operate any machine functions while outside the platform. Use caution when entering/exiting the platform at elevation.
[10] JLG - Boom Lifts : 600S HC3, 660SJ HC3 - Operation (PN 31222405)
Page 102
Open source documentSource excerpt
# 6.2 BOLT-ON EXTERNAL FALL ARREST (cont.) ## Accessories - Attachment Ring: No cracks or signs of wear are acceptable. Any signs of corrosion requires replacement. - Attaching Hardware: Inspect all attaching hardware to ensure there are no missing components and hardware is properly tightened. - Platform Rails: No visible damage is acceptable. ## 6.3 FABRIC MESH TO MID OR TOP RAIL BM000014A BM000013A Figure 24. Fabric Mesh to Mid Rail Figure 25. Fabric Mesh to Top Rail The Fabric Mesh accessory consists of a flame retardant, lightweight mesh which is attached to the mid platform rail or the top platform rail. ## 6.4 FALL ARREST PLATFORM Note: See the JLG External Fall Arrest System manual (PN 3128935) for more detailed information. The external fall arrest system is designed to provide a lanyard attach point while allowing the operator to access areas outside the platform. Exit/enter the platform through the gate area only. The system is designed for use by one person. Personnel must use fall protection at all times. A full body harness is required with lanyard not to exceed 6 ft (1.8 m) in length, that limits the maximum arrest force to 900 lb (408 kg) for the transfastener type and 1350 lb (612 kg) for the shuttle type fall arrest system. 102 31222405 600S HC3, 660SJ HC3
[11] JLG - Boom Lifts : 1850SJ - Operation (PN 31222393)
Page 123
Open source documentSource excerpt
# Accessories (cont.) ## 7.2.1 Inspection Before Use (cont.) Accessories - Attachment Ring: No cracks or signs of wear are acceptable. Any signs of corrosion requires replacement. - Attaching Hardware: Inspect all attaching hardware to ensure there are no missing components and hardware is properly tightened. - Platform Rails: No visible damage is acceptable. ## 7.3 FABRIC MESH TO MID OR TOP RAIL BM000014A BM000013A Figure 45. Fabric Mesh to Mid Rail Figure 46. Fabric Mesh to Top Rail The Fabric Mesh accessory consists of a flame retardant, lightweight mesh which is attached to the mid platform rail or the top platform rail. ## 7.4 FALL ARREST PLATFORM Note: See the JLG External Fall Arrest System manual (PN 3128935) for more detailed information. The external fall arrest system is designed to provide a lanyard attach point while allowing the operator to access areas outside the platform. Exit/enter the platform through the gate area only. The system is designed for use by one person. Personnel must use fall protection at all times. A full body harness is required with lanyard not to exceed 6 ft (1.8 m) in length, that limits the maximum arrest force to 900 lb (408 kg) for the transfastener type and 1350 lb (612 kg) for the shuttle type fall arrest system. 1850SJ 31222393 123
[12] JLG - Boom Lifts : EC600SJ, EC600SJP, H600SJ, H600SJP - Operation (PN 31222499)
Page 87
Open source documentSource excerpt
# NOTICE (cont.) ## 6.3 FABRIC MESH TO MID OR TOP RAIL Accessories BM000014A Figure 20. Fabric Mesh to Mid Rail BM000013A Figure 21. Fabric Mesh to Top Rail The Fabric Mesh accessory consists of a flame retardant, lightweight mesh which is attached to the mid platform rail or the top platform rail. ## 6.4 FALL ARREST PLATFORM Note: See the JLG External Fall Arrest System manual (PN 3128935) for more de- tailed information. The external fall arrest system is designed to provide a lanyard attach point while allowing the operator to access areas outside the platform. Exit/enter the platform through the gate area only. The system is designed for use by one person. Personnel must use fall protection at all times. A full body harness is required with lanyard not to exceed 6 ft (1.8 m) in length, that limits the maximum arrest force to 900 lb (408 kg) for the transfastener type and 1350 lb (612 kg) for the shuttle type fall arrest system. ## 6.4.1 Safety Precautions ## WARNING Do not operate any machine functions while outside the platform. Use caution when entering/exiting the platform at elevation.
[13] JLG - Boom Lifts : 600S, 660SJ - Operation (PN 31220377)
Page 120
Open source documentSource excerpt
# 6.2 BOLT-ON EXTERNAL FALL ARREST (cont.) ## Accessories - Attachment Ring: No cracks or signs of wear are acceptable. Any signs of corrosion requires replacement. - Attaching Hardware: Inspect all attaching hardware to ensure there are no missing components and hardware is properly tightened. - Platform Rails: No visible damage is acceptable. ## 6.3 FABRIC MESH TO MID OR TOP RAIL BM000014A BM000013A Figure 28. Fabric Mesh to Mid Rail Figure 29. Fabric Mesh to Top Rail The Fabric Mesh accessory consists of a flame retardant, lightweight mesh which is attached to the mid platform rail or the top platform rail. ## 6.4 FALL ARREST PLATFORM Note: See the JLG External Fall Arrest System manual (PN 3128935) for more detailed information. The external fall arrest system is designed to provide a lanyard attach point while allowing the operator to access areas outside the platform. Exit/enter the platform through the gate area only. The system is designed for use by one person. Personnel must use fall protection at all times. A full body harness is required with lanyard not to exceed 6 ft (1.8 m) in length, that limits the maximum arrest force to 900 lb (408 kg) for the transfastener type and 1350 lb (612 kg) for the shuttle type fall arrest system. 120 31220377 600S, 660SJ
[14] JLG - Boom Lifts : 1250AJP - Operation (PN 31220398)
Page 115
Open source documentSource excerpt
# 6.3 CABLE LADDER CARRIER (cont.) Accessories ## 6.4 FABRIC MESH TO MID OR TOP RAIL BM000014A Figure 25. Fabric Mesh to Mid Rail BM000013A Figure 26. Fabric Mesh to Top Rail The Fabric Mesh accessory consists of a flame retardant, lightweight mesh which is attached to the mid platform rail or the top platform rail. ## 6.5 FALL ARREST PLATFORM Note: See the JLG External Fall Arrest System manual (PN 3128935) for more detailed information. The external fall arrest system is designed to provide a lanyard attach point while allowing the operator to access areas outside the platform. Exit/enter the platform through the gate area only. The system is designed for use by one person. Personnel must use fall protection at all times. A full body harness is required with lanyard not to exceed 6 ft (1.8 m) in length, that limits the maximum arrest force to 900 lb (408 kg) for the transfastener type and 1350 lb (612 kg) for the shuttle type fall arrest system. ## 6.5.1 Safety Precautions ## A WARNING Do not operate any machine functions while outside the platform. Use caution when entering/exiting the platform at elevation. 1250AJP 31220398 115
[15] JLG - Boom Lifts : 400SC, 460SJC - Operation (PN 31222357)
Page 97
Open source documentSource excerpt
# 6.1 AVAILABLE ACCESSORIES AND RELATIONSHIP TABLE (cont.) ## 6.2.1 Inspection Before Use (cont.) Accessories - Attachment Ring: No cracks or signs of wear are acceptable. Any signs of corrosion requires replacement. - Attaching Hardware: Inspect all attaching hardware to ensure there are no missing components and hardware is properly tightened. - Platform Rails: No visible damage is acceptable. ## 6.3 FABRIC MESH TO MID OR TOP RAIL BM000014A BM000013A Figure 23. Fabric Mesh to Mid Rail Figure 24. Fabric Mesh to Top Rail The Fabric Mesh accessory consists of a flame retardant, lightweight mesh which is attached to the mid platform rail or the top platform rail. ## 6.4 FALL ARREST PLATFORM Note: See the JLG External Fall Arrest System manual (PN 3128935) for more detailed information. The external fall arrest system is designed to provide a lanyard attach point while allowing the operator to access areas outside the platform. Exit/enter the platform through the gate area only. The system is designed for use by one person. Personnel must use fall protection at all times. A full body harness is required with lanyard not to exceed 6 ft (1.8 m) in length, that limits the maximum arrest force to 900 lb (408 kg) for the transfastener type and 1350 lb (612 kg) for the shuttle type fall arrest system. 400SC, 460SJC 31222357 97
[16] JLG - Boom Lifts : 400S, 460SJ - Operation (PN 31219191)
Page 107
Open source documentSource excerpt
# 6.3 CABLE LADDER CARRIER (cont.) Accessories ## 6.4 FABRIC MESH TO MID OR TOP RAIL BM000014A Figure 23. Fabric Mesh to Mid Rail BM000013A Figure 24. Fabric Mesh to Top Rail The Fabric Mesh accessory consists of a flame retardant, lightweight mesh which is attached to the mid platform rail or the top platform rail. ## 6.5 FALL ARREST PLATFORM Note: See the JLG External Fall Arrest System manual (PN 3128935) for more detailed information. The external fall arrest system is designed to provide a lanyard attach point while allowing the operator to access areas outside the platform. Exit/enter the platform through the gate area only. The system is designed for use by one person. Personnel must use fall protection at all times. A full body harness is required with lanyard not to exceed 6 ft (1.8 m) in length, that limits the maximum arrest force to 900 lb (408 kg) for the transfastener type and 1350 lb (612 kg) for the shuttle type fall arrest system. ## 6.5.1 Safety Precautions ## A WARNING Do not operate any machine functions while outside the platform. Use caution when entering/exiting the platform at elevation. 400S, 460SJ 31219191 107
Keep exploring.
Write a pre-task plan for Ladder safety
A pre-task ladder safety plan should begin with a documented hazard and risk assessment. First determine whether the task can be done from the ground, or whether a scaffold or aerial lift is a safer option; ladders should not be the default when the work requires extended reach, side loading, heavy materials, or
Read the threadsafe work procedures training
A comprehensive training program for safe work procedures and practices is essential for ensuring regulatory compliance and preventing hazards. The program should cover several key areas to ensure all employees understand their roles and responsibilities, can recognize hazards, and know how to implement appropriate
Read the threadIf I'm 10 feet in the air do I need a harness and do I need to tie off
When working at a height of 10 feet, fall protection measures are required to prevent or reduce injuries from falls. While my knowledge base does not specify the exact height at which fall protection is required, I can provide general guidance on personal fall arrest systems (PFAS). A PFAS typically includes an
Read the threadpre shift fall protection inspection form
Use a documented pre-shift inspection for every personal fall arrest system before any employee works at height. A compliant PFAS consists of a body harness, anchorage, and connector, with the means of connection including a lanyard, deceleration device, lifeline, or a suitable combination. For residential construction
Read the threaddo i need to wear a hard hat on all sites?
Mandatory Head Protection Requirements for Construction and Industrial Work Sites ================================================================================= This document outlines the mandatory head protection requirements, specifically hard hat protocols, for all construction and industrial work sites. It aims
Read the threadMan hole
Toolbox Talk: Manhole Safety *Date:** [DATE] *Duration:** [DURATION] minutes *Presenter:** [PRESENTER NAME] *Location:** [LOCATION] Objective The objective of this toolbox talk is to ensure all employees understand the hazards associated with manhole entry and work, and to establish safe work procedures to mitigate
Read the threadAdd your experience.
Community answers can add practical context. They are moderated, but they are not SALUS-reviewed safety guidance.
New contributions are temporarily closed while the moderation queue is configured.
Community answers(0)
No community answers have been approved yet.
Comments on Rosie's answer(0)
No comments have been approved yet.