Heading over to an industrial HVAC site - what ppe is required for me

Source excerpt

# Personal Protective Equipment (PPE) Checklist <table><tr><th>General PPE Requirements</th><th>Yes</th><th>No</th><th>Comments</th></tr><tr><td>1. Has a hazard assessment to identify and control physical and health hazards been completed? If not, perform a hazard assessment.</td><td></td><td></td><td></td></tr><tr><td>2. Have engineering and/or administrative controls been applied prior to the use of PPE? If not, apply them first if applicable and appropriate.</td><td></td><td></td><td></td></tr><tr><td>3. Has appropriate PPE that matches the hazard been identified and provided to employees for use?</td><td></td><td></td><td></td></tr><tr><td>4. Has the effectiveness of the PPE program been reviewed, updated and evaluated periodically?</td><td></td><td></td><td></td></tr><tr><td>5. Have employees been trained on the use and care of the PPE?</td><td></td><td></td><td></td></tr><tr><td>6. Have employees been trained on the limitations of the PPE?</td><td></td><td></td><td></td></tr><tr><td>7. Is the PPE training documented and kept on file?</td><td></td><td></td><td></td></tr><tr><td>8. Are supervisors enforcing the use of required PPE?</td><td></td><td></td><td></td></tr><tr><td>9. Is PPE inspected regularly and properly maintained?</td><td></td><td></td><td></td></tr><tr><td>10. Is worn and damaged PPE removed from service and replaced?</td><td></td><td></td><td></td></tr><tr><td>11. When the following type of PPE is necessary, is the employer providing and paying for the PPE as stated by the OSHA standard 1910.132? Metatarsal foot protection - Rubber boots with steel toes Non-specialty-toe footwear (i.e. steel toe shoes/boots) if the employer does not permit it to be worn off the job site Non-prescriptive eye protection Prescriptive eyewear inserts/lenses for full face respirators Goggles and face shields Firefighting PPE (i.e. helmet, boots, gloves, full gear, proximity suits, etc.) Hard hats Hearing protection Welding PPE</td><td></td><td></td><td></td></tr></t…

Source excerpt

# OSHA QUICK CARD™ ## Protect Yourself Construction Personal Protective Equipment (PPE) ## Eye and Face Protection - Safety glasses or face shields are worn any time work operations can cause foreign objects to get in the eye. For example, during welding, cutting, grinding, nailing (or when working with concrete and/or harmful chemi- cals or when exposed to flying particles). Wear when exposed to any electrical hazards, including working on energized electrical systems. - Eye and face protectors - select based on anticipated hazards. ## Foot Protection - Construction workers should wear work shoes or boots with slip-resistant and puncture-resistant soles. • Safety-toed footwear is worn to prevent crushed toes when working around heavy equipment or falling objects. - Hand Protection - Gloves should fit snugly. - Workers should wear the right gloves for the job (examples: heavy-duty rubber gloves for concrete work; welding gloves for welding; insulated gloves and sleeves when exposed to electrical hazards). - Head Protection • Wear hard hats where there is a potential for objects falling from above, bumps to the head from fixed objects, or of accidental head contact with electrical hazards. - Hard hats - routinely inspect them for dents, cracks or deterioration; replace after a heavy blow or electrical shock; maintain in good condition. - Hearing Protection - Use earplugs/earmuffs in high noise work areas where chainsaws or heavy equipment are used; clean or replace earplugs regularly. For more complete information: Occupational OSHA Safety and Health Administration U.S. Department of Labor www.osha.gov (800) 321-OSHA OSHA 3260-09N-05

Source excerpt

# Employer responsibility (cont.) ## Hazard key (cont.) PERSONAL PROTECTIVE EQUIPMENT ## Select appropriate equipment Provide appropriate PPE to employees who need protection from the hazards. Select PPE that properly fits workers and ensure equipment is inspected and maintained. Communicate the PPE selection decision to employees. Require that employees use the equipment and use it correctly. Hazards that cannot be eliminated through engineering or administrative controls are the ones to control with PPE. Table 2 matches appropriate personal protective equipment with common workplace hazards. The list is not intended to be exhaustive. ## Train employees Although not required, employers should keep a record of employees who receive PPE training. The record should document the worker's name, the type of training, and the training date. Employees must receive the following information in training: - What PPE is necessary • When PPE must be worn • How to put on, adjust, wear, and remove PPE - The limitations of PPE ● Proper care, maintenance, and useful life of PPE • When to replace worn-out PPE • How to discard contaminated PPE Table 2 <table><tr><th>Body part</th><th>Hazard</th><th>Appropriate PPE</th></tr><tr><td rowspan="4">Eyes and face</td><td>Flying particles or dust</td><td>Safety glasses with side shields, goggles, face shields, sand-blasting helmets</td></tr><tr><td>Molten metal</td><td>Splash goggles, face shields</td></tr><tr><td>Liquid chemicals</td><td>Gas-tight goggles, face shields</td></tr><tr><td>UV or IR light</td><td>Laser-safety lens with appropriate filter</td></tr><tr><td rowspan="4">Head</td><td>Falling or overhead objects</td><td>Hard hat, helmet</td></tr><tr><td>Electrical conductors</td><td>Class B hard hat or helmet</td></tr><tr><td>Power-driven machinery</td><td>Head covering or caps that completely cover hair</td></tr><tr><td>Molten metal</td><td>Heat resistant hood &amp; neck covering</td></tr><tr><td rowspan="5">Feet</td…

Source excerpt

(4) Employees must comply with job safety practices and proce- dures and PPE requirements that are relevant to the job site. (5) High visibility garments. (a) During daylight hours, when employees' duties are performed in close proximity to moving vehicles, you must make sure that employ- ees wear a high-visibility safety vest, shirt, or jacket that is fluo- rescent yellow-green, fluorescent orange-red, or fluorescent red in color. This garment must always be worn as an outer garment. ## Definition: - For the purpose of this rule, hours of darkness means from one- half hour before sunset to one-half hour after sunrise. (b) During hours of darkness, when employees' duties are per- formed in close proximity to moving vehicles, you must make sure that employees wear, at a minimum, a high-visibility safety vest, shirt, or jacket: • Designed according to ANSI/ISEA 107-1999 Class 2 specifica- tions; - Worn as an outer garment; • - AND Note: - Worn to provide 360 degrees of visibility around the employee. A high-visibility garment meets Class 2 specifications if the garment: • Has an ANSI "Class 2" label; OR • Has at least 775 square inches of background material and 201 square inches of retroflective material that encircles the torso and is placed to provide 360 degrees of visibility around the employee. • Fading and soiling may degrade the high-visibility characteristics of the garments. ANSI/ISEA 107-1999 is available by: Purchasing copies of ANSI/ISEA 107-1999 by writing: -American National Standards Institute [redacted street address] New York, NY [redacted postal code] OR - Contacting the ANSI website at http://web.ansi.org/. OR Note: • Reading a copy of ANSI/ISEA 107-1999 at any Washington state library. (6) Payment for PPE. Except as provided in (a) through (e) of this subsection, the protective equipment, including PPE, used to com- ply with this chapter must be provided by the employer at no cost to employees. (a) You are not required to pay fo…

Source excerpt

# Personal Protective Equipment (PPE) Checklist (cont.) <table><tr><th>52. Are Class B hats worn in situations with electrical hazards?</th><th></th><th></th><th></th></tr><tr><td>Foot Protection (N/A )</td><td>Yes</td><td>No</td><td>Comments</td></tr><tr><td>53. Has the proper foot protection been selected and are employees required to use it when exposed to any of the following: Falling objects Punctures Crushing or rolling objects Stubbing Chemical or corrosive contact Electrical shock or burns Slips or falls</td><td></td><td></td><td></td></tr><tr><td>54. Is protective footwear sturdy with nonskid soles?</td><td></td><td></td><td></td></tr><tr><td>55. Is steel-toed or non-metallic safety-toed footwear required to resist impact?</td><td></td><td></td><td></td></tr><tr><td>56. In areas where there is risk for a puncture type injury, do shoes have flexible metal soles or inner shoes?</td><td></td><td></td><td></td></tr><tr><td>57. Do employees wear the proper protective footwear when working in areas that have electrical hazards?</td><td>பப</td><td></td><td></td></tr><tr><td>58. Are employees wearing footwear with slip- resistant soles when working in wet or slippery areas?</td><td></td><td></td><td></td></tr><tr><td>59. Are employees who work in areas that have a risk of chemical or corrosive exposures wearing the appropriate chemical-resistant boots?</td><td></td><td></td><td></td></tr><tr><td>60. Is damaged, defective or worn foot protection properly discarded and replaced?</td><td></td><td></td><td></td></tr><tr><td>Hand Protection (N/A )</td><td>Yes</td><td>No</td><td>Comments</td></tr><tr><td>61. Has the proper hand protection been selected and are employees required to use it when exposed to any of the following: Skin absorption of harmful substances Sever cuts/lacerations Sever abrasions Punctures - Thermal and chemical burns Temperature extremes Corrosive liquids Blood and other potentially infectious materials</td><td></td><td></td><td></td></tr></tabl…