Skip to content
All safety questions
Asked by a personGeneral — US and Canadaen-US

hilti documents please

A person submitted this question to Rosie's free generator. The asker's identity is neither imported nor published.

Rosie's answer

Published by SALUS

Hilti safety documentation in the provided sources is primarily Safety Data Sheet information for firestop, sealant, mortar, foam, and spray products. These SDSs are intended to communicate product hazards, safe handling precautions, PPE, and health, safety, and environmental requirements, and they should be used together with workplace procedures, training, and task-specific risk assessments. [6] [6] [2]

From the cited Hilti SDSs, several products have low fire and physical hazard ratings. CP 637 firestop mortar is rated NFPA fire hazard 0 and reactivity 0, with a health hazard rating of 1 indicating slight irritation potential. FS-ONE MAX / CFS-FIL is rated minimal hazard for health, flammability, and physical stability. CP 506 smoke and acoustic sealant is described as non-flammable, stable under normal conditions, and non-reactive under normal conditions of use, storage, and transport. [2] [2] [2] [3] [1] [1]

Safe use procedures and occupational health guidance:

  • Review the current Hilti SDS before use and make sure workers understand the product hazards, required precautions, first-aid measures, spill response, storage conditions, and exposure controls.
  • Carry out a task-specific risk assessment before work begins. Identify the work area, task, hazards, controls, and required PPE, and document the assessment.
  • Apply the hierarchy of controls first: eliminate or reduce the hazard through process changes, tool selection, sequencing, isolation, or ventilation before relying on PPE alone.
  • Provide adequate ventilation, especially where vapors, mist, dust, or aerosols may be generated. Use local exhaust where needed.
  • Prevent ingestion and contamination during use: do not eat, drink, or smoke while handling these products, and wash hands and face after handling.
  • Store products according to SDS guidance, in closed containers where applicable, in cool, well-ventilated areas, and control access where hazardous chemicals require it.
  • Prepare for emergencies by ensuring workers know spill response, fire response, eyewash/shower locations where needed, and reporting procedures.

[7] [8] [10] [1] [5] [5] PPE and inspection requirements:

  • For CP 637 firestop mortar, the cited PPE is safety glasses, gloves, and a dust respirator.
  • For FS-ONE MAX / CFS-FIL and CP 572 spray, the cited PPE is safety glasses and gloves.
  • For CP 506 sealant, suitable protective clothing is required, and normal hygiene controls include not eating, drinking, or smoking during use.
  • Select PPE based on the actual task hazards identified in the assessment, such as splash, dust, flying particles, chemical contact, or inhalation exposure.
  • Inspect PPE before use and during service. Remove defective or damaged PPE from service immediately and replace it.
  • Train employees on proper use, care, cleaning, maintenance, and limitations of PPE, and document that training.

[2] [3] [4] [1] [9] [9] For regulatory compliance, the provided Hilti documents are SDSs prepared under the OSHA HazCom SDS format, and the broader framework shown in the sources also aligns with WHMIS concepts for Canadian workplaces. The SDS format covers handling and storage, accidental release measures, exposure controls, PPE, and physical and chemical properties. In practice, employers should ensure the latest SDS is accessible, workers are trained, labels are maintained, and workplace controls comply with applicable OSHA, WHMIS, and local occupational safety requirements. [1] [6] [7] [7]

The provided sources do not include Hilti operating instructions or product-specific installation manuals, and they do not provide a complete project risk assessment for a particular job. For those topics, the safe approach is to supplement the SDS with the exact Hilti operating instructions for the tool or system being used, a site-specific risk assessment/JHA, supervision, worker training, and inspection records. This is especially important where application methods create additional hazards such as dust, aerosols, confined spaces, hot work interfaces, work at height, or interaction with other chemicals. [6] [8] [11]

11 source record(s)

Sources used for this answer

[1] Personal Protective Equipment (PPE) Guide

Page 21

Open source document

Source excerpt

# Option 2 # Job Hazard Analysis Assessment for PPE Use with WAC [redacted identifier] Personal Protective Equipment (PPE) The Job Hazard Analysis (JHA) approach to doing a hazard assessment for PPE is a more comprehensive method and may be more useful in larger businesses with many hazards and/or complex safety issues. It also helps you assign a Risk Priority Code to the hazard to determine the course of actions you need to take to control the hazard. Follow the instructions as you conduct your hazard assessment and fill in the hazard assessment form. You can make copies of the form or customize it to fit the needs of your work place. For more detailed explanations of the instructions and guidance on doing the hazard assessment, including completed sample forms, see the "Additional Guidelines on Conducting a JHA Hazard Assessment for PPE," pages 25-30). This tool can also serve as written certification that you have done a hazard assessment as required by WAC 296-800-[redacted postal code] Document your hazard assessment for PPE. Make sure that the blank fields at the bottom of the form (indicated by *) are filled out. *Name of your work place *Address of the work place where you are doing the hazard assessment *Name of person certifying that a workplace hazard assessment was done *Date the hazard assessment was done 24 21 21

[2] Personal Protective Equipment (PPE) Guide

Page 37

Open source document

Source excerpt

# SAMPLE PPE POLICIES ## Supervisors (leads, etc., and/or designated persons) Supervisors (leads, etc., and/or designated persons) have the primary responsibility for implementing and enforcing PPE use and policies in their work area. This involves 1. Providing appropriate PPE and making it available to employees. 2. Ensuring that employees are trained on the proper use, care, and cleaning of PPE. 3. Ensuring that PPE training certification and evaluation forms are signed and given to (Safety Person or designated person responsible for your work place safety and health program). 4. Ensuring that employees properly use and maintain their PPE, and follow (Name of your business) PPE policies and rules. 5. Notifying (Name of your business) management and the Safety Person when new hazards are introduced or when processes are added or changed. 6. Ensuring that defective or damaged PPE is immediately disposed of and replaced. ## Employees The PPE user is responsible for following the requirements of the PPE policies. This involves 1. Properly wearing PPE as required. 2. Attending required training sessions. 3. Properly caring for, cleaning, maintaining, and inspecting PPE as required. 4. Following (Name of your business) PPE policies and rules. 5. Informing the supervisor of the need to repair or replace PPE. Employees who repeatedly disregard and do not follow PPE policies and rules will be (Write in the actions management will take concerning this matter.) (Customize this page by modifying or adding any additional responsibilities and deleting those that may not apply to your company.) Sample Policies-4

[3] WHMIS - Safety Data Sheet (SDS)

Page 2

Open source document

Source excerpt

# WHMIS - Safety Data Sheet (SDS) (cont.) ## Important Information (cont.) Health Canada is the government body responsible for the overall WHMIS supplier-related laws. Note that WHMIS is also regulated in the workplace by the provinces, territories and federal (for federally regulated workplaces) governments under their occupational health and safety legislation. While these jurisdictions based their WHMIS regulations on a common model, small variations between jurisdictions may exist. Suppliers and employers must use and follow the WHMIS requirements for labels and safety data sheets (SDSs) for hazardous products sold, distributed, or imported into Canada. Please refer to the following OSH Answers documents for more information about WHMIS: - WHMIS - General - WHMIS - Pictograms - WHMIS - Labels - WHMIS - Hazard Classes and Categories - WHMIS - Education and Training - WHMIS - WHMIS Program - WHMIS - Glossary - WHMIS - Confidential Business Information (CBI) - WHMIS - Variances - WHMIS - Laboratories ## What is an SDS? Safety Data Sheets (SDSs) are summary documents that provide information about the hazards of a product and advice about safety precautions. SDSs are usually written by the manufacturer or supplier of the product, and must be provided by the suppliers of the hazardous products at the time of sale. In some circumstances, an employer may be required to prepare an SDS (e.g., when the product is produced and used exclusively in that workplace). SDSs provide more detailed hazard information about the product than the label. They are an important information resource for workplaces and workers about the product(s) used. Use this information to identify the hazards of the products you use, and follow the recommended safe handling and emergency measures to protect workers from those hazards. SDSs tell users what the hazards of the product are, how to use the product safely, what to expect if the recommendations are not followed, how to …

[4] Hilti - CP- 506 Smoke and acoustic sealant

Page 4

Open source document

Source excerpt

# CP 506 / CS-ADH ACR 310 (cont.) ## 8.3. Individual protection measures/Personal protective equipment (cont.) HILTI # CP 506 / CS-ADH ACR 310 Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Skin and body protection: Wear suitable protective clothing Personal protective equipment symbol(s): Other information: Do not eat, drink or smoke during use. ## SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties <table><tr><th>physical Physical state</th><th>properties Liquid</th></tr><tr><td>Appearance</td><td>Pasty.</td></tr><tr><td>Colour</td><td>Colourless</td></tr><tr><td>Odour</td><td>characteristic</td></tr><tr><td>Odour threshold</td><td>Not determined</td></tr><tr><td>pH</td><td>Not determined</td></tr><tr><td>Melting point</td><td>Not applicable</td></tr><tr><td>Freezing point</td><td>No data available</td></tr><tr><td>Boiling point</td><td>&gt; 100 °C</td></tr><tr><td>Flash point</td><td>&gt; 100 °C</td></tr><tr><td>Relative evaporation rate (butylacetate=1)</td><td>No data available</td></tr><tr><td>Flammability (solid, gas)</td><td>Not applicable. Non flammable.</td></tr><tr><td>Vapour pressure</td><td>23 hPa</td></tr><tr><td>Relative vapour density at 20°C</td><td>No data available</td></tr><tr><td>Relative density</td><td>No data available</td></tr><tr><td>Density</td><td>1.5 — 1.6 g/cm3</td></tr><tr><td>Molecular mass</td><td>Not determined</td></tr><tr><td>Solubility</td><td>No data available</td></tr><tr><td>Partition coefficient n-octanol/water (Log Pow)</td><td>No data available</td></tr><tr><td>Auto-ignition temperature</td><td>No data available</td></tr><tr><td>Decomposition temperature</td><td>No data available</td></tr><tr><td>Viscosity, kinematic</td><td>No data available</td></tr><tr><td>Viscosity, dynamic</td><td>No data available</td></tr><tr><td>Explosive limits</td><td>No data available</td></tr><tr><td>Explosive prope…

[5] Hilti - FS-ONE MAX / CFS-FIL

Page 10

Open source document

Source excerpt

# FS-ONE MAX / CFS-FIL (cont.) HILTI # FS-ONE MAX / CFS-FIL Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Hazard Rating Health Flammability Physical Personal protection - 0 Minimal Hazard - No significant risk to health - 0 Minimal Hazard - Materials that will not burn - 0 Minimal Hazard - - Materials that are normally stable, even under fire conditions, and will NOT react with water, polymerize, decompose, condense, or self-react. Non-Explosives. - B - - Safety glasses, Gloves <table><tr><th colspan="4">Indication of changes:</th></tr><tr><td>Section</td><td>Changed item</td><td>Change</td><td>Comments</td></tr><tr><td></td><td></td><td></td><td>general update</td></tr></table> SDS_US_Hilti This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product. 10/30/2024 US-OSHA en 10/10

[6] Personal Protective Equipment (PPE) Guide

Page 4

Open source document

Source excerpt

# How To Use This Guide This guide will help you to comply with the WISHA (Washington Industrial Safety and Health Act) Personal Protective Equipment rules. Volume 1: General Personal Protective Equipment, covers PPE requirements used to protect the head, eyes and face, hand and arm, foot and leg, and body (torso) in most work environments. Future volumes will cover other PPE, such as Hearing Protection, Respiratory Protection, Fall Protection, etc., which have specific requirements, including separate written programs. This guide features a Resource section containing ✓ Sample checklists and forms that you can use and modify (Microsoft Word format) to fit the needs of your particular work place. ✓ Optional PPE policies which you may choose to incorporate into your Accident Prevention Program. (If you need assistance with your Accident Prevention Program, you can consult the Accident Prevention Program Guide.) - Information on particular types of PPE to help you select the appropriate equipment. This guide is not a substitute for the WISHA standards. You need to refer to the Washington Administrative Code (WAC) chapters listed below to make sure you comply with the rules when using this guide. ➤ For this user guide on general PPE, refer to - PPE in the Core Rules Chapter [redacted identifier] ➤ The hazards in your work place may have special rules that apply to them. For information about PPE for specific work places or work tasks, see these WISHA rules: <table><tr><th>Work place</th><th>WAC code reference</th></tr><tr><td>Construction Work</td><td>Chapter 296-155</td></tr><tr><td>Electrical Workers</td><td>Chapter 296-45</td></tr><tr><td>Fire Fighters</td><td>Chapter 296-305</td></tr><tr><td>General Occupational Health Standards</td><td>Chapter 296-62</td></tr><tr><td>such as Hearing Protection</td><td>Chapter 296-62 Part K</td></tr><tr><td>Respiratory Protection</td><td>Chapter 296-62 Part E</td></tr><tr><td>Bloodborne Pathogens</td><td>Chapter 296-62 P…

[7] Personal Protective Equipment (PPE) Guide

Page 28

Open source document

Source excerpt

# Option 2 A high risk priority means that there is a reasonable to high probability that an employee will be killed or permanently disabled doing this task step and/or a high probability that the employee will suffer severe illness or injury! 4. Select PPE: Try to reduce employee exposure by first implementing effective controls that do not primarily rely on individual employee behavior (such as using PPE). Follow the "Hierarchy of Controls" (p. 38). a. For each hazard you identified, ask the question: "Can we change the way this job is done to eliminate or reduce this hazard?" Ideas might include combining steps, changing the sequence, a different tool, a change in the workstation, ventilation etc. The employees who do this job may have some good practical ideas. b. If none of these will work, what personal protective equipment (PPE) is needed? If PPE is needed, it must be appropriately matched to the hazard to provide effective protection against the hazard. c. Write down your solution in the Control Method column opposite the hazard. If you still aren't satisfied that the hazard is under control, you may need to consider not doing this job or doing it less often. 5. Certify the hazard assessment: Make sure you sign and fill in the required information (indicated by *) at the bottom of the form for proper documentation of the hazard assessment. The following pages show two examples of completed JHA hazard assessments for PPE. 28

[8] WHMIS - Safety Data Sheet (SDS)

Page 6

Open source document

Source excerpt

# WHMIS - Safety Data Sheet (SDS) (cont.) ## What information is on the SDS? (cont.) <table><tr><th></th><th></th><th>Special protective equipment and precautions for fire-fighters</th></tr><tr><td>6</td><td>Accidental release measures</td><td>Personal precautions, protective equipment and emergency procedures Methods and materials for containment and cleaning up</td></tr><tr><td>7</td><td>Handling and storage</td><td>Precautions for safe handling Conditions for safe storage (including incompatible materials)</td></tr><tr><td>8</td><td>Exposure controls/ Personal protection</td><td>Control parameters, including occupational exposure guidelines or biological exposure limits and the source of those values Appropriate engineering controls Individual protection measures (e.g., personal protective equipment)</td></tr><tr><td>9</td><td>Physical and chemical properties</td><td>Physical state Colour Odour Melting point and Freezing point Boiling point, or initial boiling point and boiling range Flammability Lower flammable or explosive limit Upper flammable or explosive limit Flash point Auto-ignition temperature Decomposition temperature pH Kinematic viscosity Solubility</td></tr></table> WHMIS - Safety Data Sheet (SDS) CCOHS

[9] Hilti - CP 637 Firestop mortar

Page 10

Open source document

Source excerpt

# Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations (cont.) HILTI # CP 637 # Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations <table><tr><th colspan="3">Abbreviations and acronyms</th></tr><tr><td>vPvB</td><td>Very Persistent and Very</td><td>Bioaccumulative</td></tr><tr><td>ED</td><td>Endocrine disrupting properties</td><td></td></tr><tr><td>NFPA health hazard</td><td></td><td>1- - Materials that, under emergency conditions, can cause significant irritation. 0</td></tr><tr><td>NFPA fire hazard</td><td></td><td>0 - Materials that will not burn under typical fire conditions, including intrinsically noncombustible materials such as concrete, stone, and 0 sand.</td></tr><tr><td>NFPA reactivity</td><td></td><td>0- - Material that in themselves are normally stable, even under fire conditions.</td></tr><tr><td colspan="3">Hazard Rating</td></tr><tr><td>Health</td><td></td><td>1 Slight Hazard - Irritation or minor reversible injury possible</td></tr><tr><td>Flammability</td><td></td><td>0 Minimal Hazard - Materials that will not burn</td></tr><tr><td>Physical</td><td></td><td>0 Minimal Hazard - Materials that are normally stable, even under fire conditions, and will NOT react with water, polymerize, decompose, condense, or self-react. Non-Explosives.</td></tr><tr><td>Personal protection</td><td></td><td>E - Safety glasses, Gloves, Dust respirator</td></tr></table> <table><tr><th colspan="3">Indication of changes:</th><th></th></tr><tr><td>Section</td><td>Changed item</td><td>Change</td><td>Comments</td></tr><tr><td></td><td></td><td></td><td>OEL</td></tr></table> SDS_US_Hilti This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product. 01/03/2025 …

[10] Hilti - CP-572 Smoke and acoustic spray

Page 8

Open source document

Source excerpt

# CP 572 (cont.) ## SECTION 16: Other information (cont.) HILTI CP 572 Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Personal protection B - - Safety glasses, Gloves SDS_US_Hilti This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product. 09/11/2023 US-OSHA en 8/8

[11] Safety Data Sheet - Cresol

Page 3

Open source document

Source excerpt

# SAFETY DATA SHEET (cont.) ## SECTION 4. FIRST AID MEASURES (cont.) C0412:Cresol Version 1.1 Revision Date: 12/16/2024 ## SECTION 5. FIRE-FIGHTING MEASURES Suitable extinguishing media : Dry powder, Foam, Water spray, Carbon dioxide (CO2) Specific hazards during fire : No information available. fighting Specific extinguishing methods : Use extinguishing measures that are appropriate to local circum- stances and the surrounding environment. Immediately evacuate personnel to safe areas. Remove undamaged containers from fire area if it is safe to do so. Special protective equipment for : Use personal protective equipment. fire-fighters ## SECTION 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective : Wear suitable protective equipment.Keep people away from and up- equipment and emergency proce- wind of spill/leak. Ensure adequate ventilation.Entry to non-involved dures personnel should be controlled around the leakage area by roping off, etc. Environmental precautions : Should not be released into the environment. Methods and materials for contain- : Collect as much of the spill as possible with a suitable absorbent mate- ment and cleaning up rial. ## SECTION 7. HANDLING AND STORAGE Technical measures : Prevent generation of vapor or mist. Take precautionary measures against static discharge. Use explosion-proof equipment. Local/Total ventilation : Ensure adequate ventilation. Handle product only in closed system or provide appropriate exhaust ventilation at machinery. Use a local exhaust ventilation. Advice on safe handling : Avoid contact with skin, eyes and clothing. Wear personal protective equipment. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not subject to grinding, shock or friction. Wash hands and face thoroughly after handling. Conditions for safe storage : Keep container tightly closed. Store in a cool and shaded area. Keep in a well-ventilated place. Store locked up. ## SECTION…

Related Q&A

Keep exploring.

Human questionGeneral

de beers safety standards

De Beers Safety Standards and Critical Safety Procedures ======================================================== This document outlines the safety standards and critical safety procedures necessary to ensure a safe working environment and prevent workplace accidents, based on industry best practices and regulatory

Read the thread
Human questionUS

dsdsdf

Safety Procedures, Risk Assessments, and Regulatory Compliance for the 'dsdsdf' System ====================================================================================== This document outlines the safety procedures, risk assessments, and regulatory compliance documentation required for the 'dsdsdf' system. It is

Read the thread
Human questionUS

Write a safe work procedure for Confined space entry

Confined Space Entry ==================== Document Number: \[SWP-NUMBER] Revision Date: \[DATE] Next Review Date: \[NEXT REVIEW DATE] Department: \[DEPARTMENT NAME] 1\. Scope This safe work procedure applies to planning, preparing for, and performing entry into permit-required confined spaces where workers may be

Read the thread
Human questionGeneral

How do I rollout HSI safety managment tool to my company American Refrigeration

\[PRE TASK PLAN TITLE] ====================== *Project:** \[PROJECT NAME] *Date:** 2025-08-12 *Location:** \[LOCATION] *Supervisor:** \[SUPERVISOR NAME] Task Overview Company-wide implementation of the HSI safety management tool at American Refrigeration, including risk assessment, hazard control, and employee training

Read the thread
Human questionUS

Write a pre-task plan for Work permit requirements

A robust pre-task plan for hazardous work should require a documented permit-to-work review before the job starts, tied to a task-specific job hazard analysis (JHA) or risk assessment. The JHA should break the work into steps, identify existing and potential hazards, assess severity and likelihood, and define controls

Read the thread
Discussion thread

Add your experience.

Community answers can add practical context. They are moderated, but they are not SALUS-reviewed safety guidance.

New contributions are temporarily closed while the moderation queue is configured.

Community answers(0)

No community answers have been approved yet.

Comments on Rosie's answer(0)

No comments have been approved yet.

Ready to put operational safety to work?

Join 400K users across 150K sites already on SALUS.

Request a demo

No commitment · 30-minute personalized walkthrough