please give me the glove policy for EAG

Source excerpt

# Chemical Protective Clothing - Glove Selection (cont.) ## How do I choose the right material for the job? (cont.) 3. Determine the flexibility and touch sensitivity needed for the task. This need may significantly limit the thickness of glove material that can be used. The requirement for textured or non-slip surfaces to improve grip must also be considered. 4. Know the type of potential contact (e.g., occasional contact, splash protection, or continuous immersion of hands). This contact will also help in choosing the appropriate length of the glove. 5. Determine the contact period. How long the worker could be in contact with the chemical (and which chemicals) may also influence the selection of type and thickness of the glove material and the choice of lined or unlined gloves. 6. Determine the potential effects of skin exposure. The immediate irritation or corrosion of the skin must be considered in addition to the potential health effects to the entire body from absorbing the chemical through the skin. 7. Consider what hazards may be presented by the use of the protective clothing itself. For example, protective clothing can contribute to heat stress; reduced dexterity; rip or tactile functions; poor comfort; or may contribute to skin conditions. 8. Consider the decontamination procedures. Consider whether the gloves should be disposed of or cleaned after use. If they are cleaned, consider the cleaning method, how often they can be cleaned, and any special procedures required for disposing of the "decontamination wash waste"? 9. Provide the necessary education and training required, which includes: - what are the hazards of skin contact with the chemical/material, - what are the limitations of the gloves, - what could happen and what to do if the gloves fail, and - when to dispose of or to decontaminate gloves. Suggested materials should be selected based on quantitative information such as permeation rate, breakthrough time, penetration and de…

Source excerpt

# Chemical Protective Clothing - Glove Selection (cont.) ## What should I know first about chemical protective clothing? (cont.) The SDS should specify the appropriate type of chemical protective material needed(e.g., neoprene, butyl rubber). If this information is missing, contact the supplier or manufacturer of the product. Manufacturers of chemical protective gloves and clothing may also assist customers in making the appropriate choices. ## What is meant by permeation rate, breakthrough time, and degradation? Permeation rate is the rate or speed at which the chemical will move through the material. It is measured in a laboratory and is expressed in units such as milligrams per square meter per second (or some other [weight of chemical] per [unit area of material] per [unit of time]). The higher the permeation rate, the faster the chemical will move through the material. Permeation is different from penetration. Penetration occurs when the chemical leaks through seams, pinholes and other imperfections in the material: permeation occurs when the chemical diffuses or travels through intact material. Breakthrough time is the time it takes a chemical to permeate completely through the material. It is determined by applying the chemical on the glove exterior and measuring the time it takes to detect the chemical on the inside surface. The sensitivity of the analytical instruments used in these measurements influences when a chemical is first detected. The breakthrough time gives some indication of how long a glove can be used before the chemical will permeate through the material. Degradation is a measurement of the physical deterioration of the material due to contact with a chemical. The material may get harder, stiffer, more brittle, softer, weaker, or may swell. The worst example is that the material may actually dissolve in the chemical. ## How do I choose the right material for the job? The appropriate material for each job must be chosen with care. Bef…

Source excerpt

# Chemical Protective Clothing - Glove Selection (cont.) ## What are some other points to remember about skin and hand protection? (cont.) If large numbers need testing use a compressed air jig. Figure 5 Double-roll the cuff over and grip with your hand. ## What is meant by a workplace evaluation? The selected glove should be carefully tested in the actual job conditions. In some situations, it may be desirable to do laboratory tests on the gloves using the American Society for Testing and Materials (ASTM) methods. This testing is especially important if you do not have information about the permeation time of a particular chemical you are using or if you are using mixtures of solvents or chemicals. Some glove manufacturers may undertake these tests for their customers. ## Does the use of chemical protective clothing require a PPE program? The employer must have a process in place to ensure a competent person reviews the selection and use of chemical protective clothing. If chemical protective gloves and clothing are required, there should be a complete PPE program in place that includes - the training of workers in the appropriate use and care of protective gear and - the selection, fitting, maintenance and inspection of the protective clothing and gloves. A successful program will ensure that any changes in chemicals used are accounted for, will regularly check for any issues, and will result in necessary changes or improvements. Chemical Protective Clothing - Glove Selection CCOHS

Source excerpt

# Health and Safety Policy - Development and Implementation (cont.) ## How can the policy be effectively implemented? (cont.) - OHS responsibilities are clearly defined, assigned, communicated, and applied throughout the organizational structure, - methods of accountability are established, - procedures and program activities that support the OHS policy are implemented, and - financial and other resources are provided, and - responsibilities for carrying out the policy objectives are clearly communicated and understood within the workplace. Tips: While the assignment of responsibilities must be a complete list customized to the type of work and organizational structure, avoid being too specific that it makes people become too legalistic in interpreting the policy. For example, it may not be necessary to list the specific type of personal protective equipment that must be worn by a worker in a policy - simply state that all workers must use the personal protective equipment specified by the employer and as required by the nature of the work. As needed, this level of detail may be conveyed in a procedure. Procedures are generally more flexible, and this method allows changes to be made as circumstances warrant. Responsibility should be extended throughout the organizational structure to ensure policy objectives will become integrated into all activities. For example, a policy could specify: - individual responsibilities, - legal responsibilities, - accountability systems, - promotion of health, safety, and well-being awareness, - education and training needs, - reporting and correcting health and safety deficiencies, and - injury and illness control information. ## How should the policy be communicated? The policy must be communicated to relevant parties in languages they understand. Ways in which the OHS policy and responsibilities can be communicated include through: - orientation (induction) and on-going training, - health and safety com…

Source excerpt

# Chemical Protective Clothing - Glove Selection (cont.) ## What are some other points to remember about skin and hand protection? (cont.) - Choose hand protection that adequately protects from the hazard(s) of a specific job and adequately meets the specific tasks involved in the job (such as flexibility or dexterity). - Follow the manufacturer's instructions for care, decontamination, and maintenance of gloves. - Be aware that some materials may cause reactions in some workers, such as allergies to latex. Offer alternatives where possible. - Make sure the gloves fit properly. - Make sure gloves cover all of the exposed skin. Gloves should be long enough so that there is no gap between the glove and sleeve. - Do not wear gloves with metal parts near electrical equipment. - Do not use worn or torn gloves. - Clean gloves as instructed by the supplier. - Inspect and test gloves for defects before using. - Test all rubber or synthetic gloves for pin holes or leaks by inflating them (see figures below). Know how to remove and either clean or dispose of used gloves, as appropriate. How can gloves be tested for holes or leaks? Figure 1 Hold the cuff as illustrated, with thumbs inside, and stretch the cuff slightly. Chemical Protective Clothing - Glove Selection CCOHS

Source excerpt

# Health and Safety Policy - Development and Implementation (cont.) ## How should the policy be communicated? (cont.) - website, notice board postings, and reminders, - safety talks, meetings, and refresher training, - senior management attendance at safety meetings, and - demonstration of senior management commitment through effective review and response to committee recommendation inspection reports, incident investigations, and health and safety program evaluations. ## How can the effectiveness of the policy be monitored? After the OHS policy has been prepared and implemented, it must be monitored to assess its effectiveness. The policy must be updated where improvements are needed. Some ways to monitor the effectiveness of the OHS policy include: - Using key performance indicators to track progress in meeting OHS goals and targets (e.g., ensuring preventive maintenance is completed, safety meetings are held, and inspections are completed, situations reported are addressed appropriately and in a timely manner), - Training effectiveness reviews, - Regularly auditing and reviewing the OHS policy and program ## How and when should the policy be reviewed? How often the policy must be reviewed must be established. The frequency may be required by applicable OHS legislation. It is recommended that the OHS policy be reviewed at least annually. A review may also be conducted before the scheduled revision date, especially when there is a change to the workplace that affect the policy, or the health and safety of workers. The OHS policy must be recommunicated to all relevant parties whenever it is revised. ## What is an example of a policy checklist to review an existing or new policy? In review, here is a sample of a series of questions that could be used as a "Yes / No" checklist: Does the statement express a commitment to health, safety, and well-being? Are obligations towards employees made clear? Health and Safety Policy - Development and Implementati…

Source excerpt

CCOHS CCHST Canadian Centre for Occupational Health and Safety Centre canadien d'hygiène et de sécurité au travail # Personal Protective Equipment # Chemical Protective Clothing - Glove Selection ## On this page What should I know first about chemical protective clothing? What is meant by permeation rate, breakthrough time, and degradation? How do I choose the right material for the job? What are some examples when selecting skin protection? What are some other points to remember about skin and hand protection? How can gloves be tested for holes or leaks? What is meant by a workplace evaluation? Does the use of chemical protective clothing require a PPE program? What are some sources of information for chemical protective clothing material selection? ## What should I know first about chemical protective clothing? Workplaces should follow the hierarchy of controls when addressing hazards. Personal protective equipment (PPE) is considered the least effective control and refers to anything workers wear to help protect them from workplace hazards. Chemical protective clothing should not be considered as a replacement for engineering control methods. However, there are often few alternatives available, or an emergency (e.g., a spill) requires their use. Since clothing is the last line of defence for protecting the skin, care must be taken to ensure it provides the level of protection expected. When selecting the appropriate clothing, be aware that the phrase commonly found on safety data sheets (SDSs) "Wear impervious (or impermeable) gloves," has very limited value. It is technically inaccurate. No glove material will remain impervious to a specific chemical forever. No one glove material is resistant to all chemicals. Some chemicals will travel through or permeate the glove in a few seconds, while other chemicals may take days or weeks. Chemical Protective Clothing - Glove Selection CCOHS