Tt

Source excerpt

# Product name: PRIMAL™ TT-935 Rheology Modifier Issue Date: 05/18/2023 <table><tr><th>Acrylic polymer(s)</th><th>Not hazardous</th><th>&gt;=29.0 31.0 %</th></tr><tr><td>Residual monomers</td><td>Not required</td><td>&lt; 0.05%</td></tr><tr><td>Water</td><td>7732-18-5</td><td>&gt;69.0 71.0 %</td></tr></table> ## 4. FIRST AID MEASURES Description of first aid measures General advice: First Aid responders should pay attention to self-protection and use the recommended protective clothing (chemical resistant gloves, splash protection). If potential for exposure exists refer to Section 8 for specific personal protective equipment. Inhalation: Move person to fresh air and keep comfortable for breathing; consult a physician. Skin contact: Wash off with plenty of water. Suitable emergency safety shower facility should be available in work area. Eye contact: Flush eyes thoroughly with water for several minutes. Remove contact lenses after the initial 1-2 minutes and continue flushing for several additional minutes. If effects occur, consult a physician, preferably an ophthalmologist. Ingestion: Rinse mouth with water. No emergency medical treatment necessary. Most important symptoms and effects, both acute and delayed: Aside from the information found under Description of first aid measures (above) and Indication of immediate medical attention and special treatment needed (below), any additional important symptoms and effects are described in Section 11: Toxicology Information. Indication of any immediate medical attention and special treatment needed Notes to physician: No specific antidote. Treatment of exposure should be directed at the control of symptoms and the clinical condition of the patient. ## 5. FIREFIGHTING MEASURES Extinguishing media Suitable extinguishing media: To extinguish combustible residues of this product use water fog, carbon dioxide, dry chemical or foam.. Unsuitable extinguishing media: None known.. Special hazards arising from the …

Source excerpt

# Product name: PRIMAL ™ TT-935 Rheology Modifier Issue Date: 05/18/2023 Unusual Fire and Explosion Hazards: Material can splatter above 100C/212F.. This material will not burn until the water has evaporated. Residue can burn.. ## Advice for firefighters Fire Fighting Procedures: Keep people away. Isolate fire and deny unnecessary entry.. Contain fire water run-off if possible.. Special protective equipment for firefighters: Wear self-contained breathing apparatus and protective suit.. If protective equipment is not available or not used, fight fire from a protected location or safe distance.. ## 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures: Use personal protective equipment. Keep people away from and upwind of spill/leak. Material can create slippery conditions. Environmental precautions: CAUTION: Keep spills and cleaning runoff out of municipal sewers and open bodies of water. Methods and materials for containment and cleaning up: Contain spills immediately with inert materials (e.g., sand, earth). Transfer liquids and solid diking material to separate suitable containers for recovery or disposal. ## 7. HANDLING AND STORAGE Precautions for safe handling: Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Keep container tightly closed. Do not breathe vapors, mist or gas. Conditions for safe storage: Keep from freezing - product stability may be affected. STIR WELL BEFORE USE. Storage stability Storage temperature: 1-49 °C (34 - 120 °F) Other data: Monomer vapors can be evolved when material is heated during processing operations. See SECTION 8, for types of ventilation required. ## 8. EXPOSURE CONTROLS/PERSONAL PROTECTION ## Control parameters If exposure limits exist, they are listed below. If no exposure limits are displayed, then no values are applicable. ## Exposure controls Engineering controls: Use local exhaust ventilation, or other engineering controls to mainta…