Skip to content
All safety questions
Asked by a personGeneral — US and Canadaen-US

NORM handling

A person submitted this question to Rosie's free generator. The asker's identity is neither imported nor published.

Rosie's answer

Published by SALUS

Safe Work Procedure: NORM Handling

Document Number: [SWP-NUMBER] Revision Date: [DATE] Next Review Date: [NEXT REVIEW DATE] Department: [DEPARTMENT NAME]

1. Scope

This procedure covers the safe handling, storage, and disposal of Naturally Occurring Radioactive Materials (NORM) in the workplace. It applies to all employees and contractors involved in activities where NORM is present, including but not limited to, oil and gas extraction, mining, and water treatment facilities.

This procedure should be used in conjunction with other relevant safety procedures and guidelines, including radiation safety protocols and hazardous materials handling procedures.

2. Definitions

NORM Naturally Occurring Radioactive Materials, which are materials containing radioactive elements that occur naturally in the environment.

Radiation Energy emitted from radioactive substances in the form of particles or electromagnetic waves.

PPE Personal Protective Equipment used to minimize exposure to hazards that cause serious workplace injuries and illnesses.

3. Responsibilities

3.1 Supervisors

  • Ensure all workers handling NORM are trained and competent.
  • Conduct regular safety audits and inspections.
  • Ensure proper PPE and equipment are available and used correctly.

3.2 Workers

  • Follow all safety procedures and use PPE as required.
  • Report any unsafe conditions or incidents to supervisors immediately.
  • Participate in training and safety meetings.

3.3 Health and Safety Representative

  • Monitor compliance with safety procedures.
  • Assist in the investigation of incidents involving NORM.

4. Potential Hazards and Risks

HazardRiskControl Measures
Radiation exposureHealth effects such as cancerUse of PPE, proper training, and monitoring of radiation levels
Inhalation of dustRespiratory issuesUse of respirators and dust control measures
ContaminationEnvironmental and personal contaminationProper containment and disposal procedures

5. Personal Protective Equipment (PPE)

Proper PPE is essential to minimize exposure to NORM.

  • Respirators - Use NIOSH-approved respirators to prevent inhalation of radioactive dust.
  • Gloves - Wear gloves to prevent skin contact with NORM.
  • Protective Clothing - Use coveralls to protect against contamination.
  • Eye Protection - Safety goggles to protect eyes from dust and particles.
  • Footwear - Use steel-toed boots with non-slip soles.

Inspect PPE before use and replace any damaged or worn items.

6. Equipment and Tools

Use appropriate equipment and tools to safely handle NORM.

  • Radiation Detectors - For monitoring radiation levels.
  • Containment Vessels - For safe storage and transport of NORM.
  • Ventilation Systems - To control dust and airborne particles.
  • Decontamination Kits - For cleaning spills and contamination.

Regularly inspect and maintain equipment to ensure proper functioning.

7. Pre-Job Requirements

7.1 Training and Competency

All workers must complete radiation safety training and demonstrate competency in handling NORM.

7.2 Pre-Job Briefing

Conduct a briefing to discuss potential hazards, control measures, and emergency procedures.

7.3 Work Area Preparation

Ensure the work area is clean, well-ventilated, and free of unnecessary personnel.

8. Safe Work Procedure Steps

Step 1: Preparation

  • Review safety data sheets and risk assessments.
  • Ensure all PPE and equipment are available and in good condition.

Step 2: Handling NORM

  • Use appropriate tools to handle NORM safely.
  • Minimize dust generation by using wet methods or enclosures.

Step 3: Storage and Disposal

  • Store NORM in labeled, secure containers.
  • Follow disposal procedures as per regulatory requirements.

9. Precautions and Safety Measures

  • Limit time spent in areas with high radiation levels.
  • Maintain a safe distance from NORM sources.
  • Use shielding to reduce exposure.

10. Emergency Procedures

10.1 General Emergency Response

Evacuate the area and notify the supervisor immediately.

10.2 Specific Emergency Scenarios

  • Spill - Contain and clean up using decontamination kits.
  • Exposure - Seek medical attention and report the incident.

10.3 Emergency Contact Information

[List of emergency contacts and their phone numbers]

11. Incident Reporting and Investigation

Report all incidents and near-misses to the supervisor. Conduct an investigation to determine the cause and prevent recurrence.

12. References and Related Documents

  • [Reference 1]
  • [Reference 2]
  • [Reference 3]

Approved by: [NAME AND POSITION] Date: [APPROVAL DATE]

Safety powered by SALUS

This answer was preserved from its published ai.salussafety.io page. The legacy export contains no separate citation records for this answer, so SALUS has not invented any.

Related Q&A

Keep exploring.

Human questionUS

Air quality index

Maintaining Acceptable Air Quality Index (AQI) Levels in the Workplace ====================================================================== *Date:** 2025-09-02 *Duration:** \[DURATION] minutes *Presenter:** \[PRESENTER NAME] *Location:** \[LOCATION] Objective To understand the guidelines and safety measures for

Read the thread
Human questionGeneral

what training is needed for a flag person in Saskatchewan

Safety Training Programs and Certifications for Traffic Control Persons in Saskatchewan Road Construction Zones =============================================================================================================== This document outlines the required safety training programs and certifications for traffic

Read the thread
Human questionGeneral

can you write me a policy for sheet processing?

I can provide some general guidelines for a sheet processing policy based on the documents you provided. However, these documents primarily focus on the safety aspects of SHEETROCK® Brand Paper Faced Metal Bead and Trim, and similar products, rather than a comprehensive sheet processing policy. Therefore, this policy

Read the thread
Human questionGeneral

Write a risk assessment for Community hub participant activity

A suitable risk assessment for community hub participant activities should be task-specific, participant-focused, and reviewed regularly. Start with a walk-through of each activity area and identify the tasks being done, the hazards present, where they are located, who may be harmed, the likelihood and severity of

Read the thread
Human questionUS

Create a job hazard assessment for drywall installation

Drywall Installation Job Hazard Analysis ======================================== *Assessment Date:** \[DATE] *Assessor:** \[ASSESSOR NAME] *Department/Area:** \[DEPARTMENT/AREA] *Review Date:** \[REVIEW DATE] 1\. Assessment Scope This risk assessment covers all activities related to drywall installation, including but

Read the thread
Human questionUS

Cultura de trabajo

Toolbox Talk: Silica Hazards and Control Measures *Date:** [DATE] *Duration:** [DURATION] minutes *Presenter:** [PRESENTER NAME] *Location:** [LOCATION] Objective The objective of this toolbox talk is to educate workers about the hazards associated with crystalline silica exposure, implement effective control measures

Read the thread
Discussion thread

Add your experience.

Community answers can add practical context. They are moderated, but they are not SALUS-reviewed safety guidance.

New contributions are temporarily closed while the moderation queue is configured.

Community answers(0)

No community answers have been approved yet.

Comments on Rosie's answer(0)

No comments have been approved yet.

Ready to put operational safety to work?

Join 400K users across 150K sites already on SALUS.

No commitment · 30-minute personalized walkthrough